IOGear GHDSSW4 User Manual

Federal Communications
Commission (FCC) Statement

This product has been tested and found to comply with the limits for a Class B
device, pursuant to part 15 of the FCC Rules. It is intended for use in
residential setting, but may also be used in commercial or industrial setting.

Package Contents

1 x 3D Complete + Unit
1 x Power Adapter
1 x Remote Control
(with CR2025 battery pre-installed)

1 x Quick Start Guide

1 x Warranty card

CE Compliance

This device has been tested and found to comply with the following European

Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage
(2006/95/EC) and R&TTED (1999/5/EC).

Limited Warranty

WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

Warranty Information

This product carries a 1 Year Limited Warranty. For the terms and conditions

of this warranty, please go to http://www.iogear.com/support/warranty

Register online at http://www.iogear.com/register

Important Product Information

Product Model
Serial Number

Contact

Toll Free 866-9-IOGEAR (USA)
Phone: [phone]

19641 Da Vinci,
Foothill Ranch, CA 92610

www.iogear.com
[e-mail]

About UsAbout Us

FUN

IOGEAR offers connectivity solutions that are innovative, fun, and
stylish, helping people enjoy daily life using our high technology
products.

GREEN

IOGEAR is an environmentally conscious company that emphasizes
the importance of conserving natural resources. The use of our
technology solutions helps reduce electronic waste.

© 2012 IOGEAR

Quick Start Guide

3D Complete +

GHDSSW4

PART NO. Q1205

Requirements

• HDMI Source

• 3D-Ready TV or Projector

• Active or Passive 3D Glasses

Specification

Item Description

I/O LED: Green x4

HDMI A Type Female Connector x5

Power Jack x1

Power Input: AC 100-240V

Output: DC 5V/2.5A

Housing Plastic

Audio HDMI output embedded

Dimensions (LxWxH) 150 x100 x 22 mm

Operation Temperature 0°C~40°C

Storage Temperature -10°C~70°C

Compliance FCC

1

Product Overview

DC IN

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HDMI 4

HDMI 1

HDMI 2

HDMI 3

HDMI 4

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HDMI 4

Remote Control

2D to 3D

3D Complete +

1. Remote sensor: Receives the

remote control signals.

2. Source indicators: Lights up

when source is inputted.

3. Source button: Switches between

different input sources.

4. Power button: Turn the power to

on or off.

5. DC IN: Plugs the supplied power

adapter.

6. HDMI output: Outputs the image

source to a HDMI display device.

7. HDMI inputs: Inputs image

sources.

Remote Control

1. Power button: Press to turn the

power to on or off.

2. 2D Button: To enable 2D mode

and enable/disable video

enhancement function

3. 3D button: Enable the 3D function.

4. 1/2/3/4 Source buttons: Select the

desired input source by pressing
the number button.

5. Adjust buttons: Press to adjust the

level of 3D LEVEL, DEPTH or POP.

Remote Control

Using remote control for the first time

Pull out the insulating film from the remote
control if the remote control is being used
for the first time.

3D

1. Press button to enable the 3D
function.

2. Pressing the will enable the 3D
function but not disable it. The

3D

2D

disables the 3D function.

Note: The 3D function is available on the
display device which supports 3D display

and the refresh rate is 120MHz at least.

Configuration

1. To configure the 3D LEVEL, DEPTH or POP, press or button
corresponding to the item of the remote control.

2. The (adjustment bar) will appear on the lower left of the screen.
Press to increase or press to decrease the level.

Note: The adjustments of 3D LEVEL, DEPTH and POP are available only in the 3D mode.

3D Level

3D Level allows you to fine tune the optimal balance of presets between 3D Pop and Depth
effects. Using the 3D Level and button on the remote control, adjust the bar level to the
right to increase the amount of preset 3D Depth and reduce the amount of preset 3D Pop.
Adjust the bar level to the left to decrease the amount of preset 3D Depth and increase the
amount of preset 3D Pop.

3D Depth

3D Depth adjusts the amount of depth going into your 3D TV. Using the 3D Depth
keys on the remote control, adjust the bar level to the right to increase the amount of depth

effect and adjust the bar level to the left to decrease.

3D Pop

3D Pop controls the amount of the video images popping out of your 3D TV. Using the 3D Pop

and button on the remote control, adjust the bar level to the right to increase the
amount that images pop out at you and adjust the bar level to the left to decrease.

1 2

HDMI OUT

DC IN

5 6 7

Replacing the battery inside of the remote control

Replace the battery when the battery is low power.

1. Push and hold the release tab to the right, and then
pull our the battery holder.

3

4

2. Replace the battery with CR2025 (3V lithium

battery) by following the orientation which printed
on the battery holder.

HDMI 1

HDMI 2

HDMI 4

HDMI 3

2 3

3. Push the holder back to the remote control.

Caution

• Be careful or your fingernails when pushing the battery release tab.

• Dispose the old battery in accordance with local regulations.

• Make sure the battery's orientation is correct. Improper or incorrect replacement of battery may cause fire,

personal injury or damage to property.

• Keep the cell battery (CR2025) away from children. Consult a medical advice immediately if a child swallows

the battery.

Connect the 3D Complete+ unit to a TV

Plug one end of HDMI
cable into HDMI output

connector of the 3D
Complete+ unit, and the

other end of HDMI cable
into a HDMI input

connector of a 3D-Ready

TV or projector.

Operation

1. Follow the Connection section to connect the
3D Complete+ unit , and then press
button on the remote control to turn on the
3D Complete+ unit. Alternatively, press
Power button on the top panel of 3D
Complete+ unit to turn the power to on.

HDMI OUT

DC IN

HDMI 1

HDMI 2

HDMI 4

HDMI 3

HDMI CableDisplay

2. Press the Source button on the top panel to

Installation

Connect the power adapter

Plug the DC connector plug of
power adapter into the 3D

1

3

2D 3D

2

INPUT

4

1

4

select an available or desired input source if
the screen shows No input signal.

Image Enhancement

Complete+ unit, and the other

DEPTH POP

5

3D LEVEL

end of adapter into a wall
outlet.

To a wall

outlet

2D

HDMI OUT

DC IN

HDMI 1

HDMI 2

HDMI 4

HDMI 3

1. Press button to enhance the images of

source. Verify at the lower right of the

screen that Video Enhancement On is

Input a source to the 3D Complete+ unit

The source shown below is an
example only. The source must be

a device which supported HDMI
output, such as a BD player, DVD
player, Set-Top box, camcorder
and so on. Plug one end of HDMI
cable into HDMI input connector of

the 3D Complete+ unit, and the

other end of HDMI cable into the

Source

HDMI OUT

DC IN

HDMI 1

HDMI 2

HDMI 4

HDMI 3

HDMI output of source. Four HDMI

inputs are supported by this 3D
Complete+ unit.

2 3 4 5

HDMI Cable

displayed

2. To see the difference between the original

source and enhanced image, press the
Depth Up Arrow or Down Arrow keys to
split the screen.

3. To turn off the image enhancement, press

2D

button again.

Note: Sometimes the TV's screen may display a black screen when inputting source from a
computer. This indicates the resolution set on the computer is not supported by the TV. Specify a
resolution and refresh rate that the TV can recognize or select the display mode to "Extended"
on the computer. For more supported resolutions, refer to the TV's instruction manual.

and