IOGear GCS1212TAA3, GCS1312TAA3, GCS1224TAA3, GCS1228TAA3, GCS1314TAA3 Administrator's Manual
...
2/4/8-Port USB DVI/HDMI/DisplayPort
Single/Dual View Secure KVM Switch
Administrator’s Guide
GCS1412TAA3 – GCS1414TAA3 – GCS1418TAA3 – GCS1422TAA3 – GCS1424TAA3 – GCS1428TAA3
GCS1212TAA3 – GCS1214TAA3 – GCS1218TAA3 – GCS1222TAA3 – GCS1224TAA3 – GCS1228TAA3
GCS1312TAA3 – GCS1314TAA3 – GCS1318TAA3 – GCS1322TAA3 – GCS1324TAA3 – GCS1328TAA3
©2018 IOGEAR® All rights reserved. Specifications subject to change without notice.
www.iogear.com
Table of content
F
CC Information ..........................................................................................................................................................3
Chapter 1 - Introduction .............................................................................................................................................7
Overview ................................................................................................................................................................. 7
Chapter 2 – Precautions and Preparation ..................................................................................................................8
Before You Begin ..................................................................................................................................................... 8
Tampering prevention and detection ..................................................................................................................... 8
Always use qualified and authorized peripheral devices ........................................................................................ 8
Secure Installation ................................................................................................................................................... 9
Secure Operation and Administration .................................................................................................................... 9
Chapter 3 – Operation ............................................................................................................................................. 10
Powering On .......................................................................................................................................................... 10
LED Display ............................................................................................................................................................ 11
Chassis Intrusion Detection ................................................................................................................................... 12
Administrator Functions ........................................................................................................................................ 12
Setup for Administrator Logon .............................................................................................................................. 12
Administrator Logon ............................................................................................................................................. 13
Log Data Audit ....................................................................................................................................................... 15
Appendix .................................................................................................................................................................. 18
Limited Warranty ..................................................................................................................................................... 19
2
FCC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. Any changes
or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measure:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio / TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation
RoHS
This product is RoHS compliant.
3
User Notice
User Information
All information, documentation, and specifications contained in this manual are subject to change without prior
notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed
or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or
fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or
licensed as is. Should the programs prove defective following their purchase, the buyer (and not the
manufacturer, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair and any
incidental or consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and / or TV interference caused by
unauthorized modifications to this device. It is the responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct
operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
Package Contents
IOGEAR Secure KVM package consists of:
1 x Secure KVM Switch
1 x Power Cord
1 x User Manual*
Please check to make sure that all of the components are present and are in good order. Please contact your
dealer if anything was missing or damaged in shipping.
Please read this manual thoroughly and follow the installation and operation procedures carefully to prevent
any damage to the switch or to any other devices on IOGEAR Secure KVM installation.
*Please visit our website to download the most up to date version of the manual
©2018 IOGEAR® All rights reserved.
Manual Version: v1.02
Manual Date: 2017-10-24
IOGEAR is a registered trademark of IOGEAR International Co., LTD.
4
ATTENTION
Tamper-evident seal
If the tamper-evident seals are missing or peeled, avoid using the product and contact your
IOGEAR dealer.
If all front panel LEDs (except for Power LED) flash continuously or the switch’s enclosure
appears to be breached, avoid using this product and contact your IOGEAR dealer.
This Secure KVM Switch is equipped with active always-on chassis intrusion detection security.
Any attempt to open the enclosure will permanently damage, disable the switch, and void the
warranty.
To maximize security and to prevent unauthorized access to Secure KVM, please change
default logon password after your first successful logon.
5
About This Administrator’s Guide
Configuration
2-Port
4-Port
8-Port
PC Video
Connection
Console Video
Connection
Number of
Displays
DisplayPort
HDMI
Single
GCS1412TAA3
GCS1414TAA3
GCS1418TAA3
Dual
GCS1422TAA3
GCS1424TAA3
GCS1428TAA3
HDMI
HDMI
Single
GCS1312TAA3
GCS1314TAA3
GCS1318TAA3
Dual
GCS1322TAA3
GCS1324TAA3
GCS1328TAA3
DVI
DVI
Single
GCS1212TAA3
GCS1214TAA3
GCS1218TAA3
Dual
GCS1222TAA3
GCS1224TAA3
GCS1228TAA3
Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys
between them: [Ctrl+Alt]
♦
→
This Administrator’s Guide is intended for authorized administrators only.
This Administrator Guide is provided to help authorized administrators to audit logs and configure the IOGEAR
Secure KVM switch series. To maximize security, administrators are recommended to audit logs event records
and the Secure KVM Switch’s configuration on a routine base.
This Administrator Guide covers the following IOGEAR Secure KVM:
Conventions
This manual uses the following conventions:
Monospaced
[]
1.
Indicates text that you should key in
need to be pressed together, they appear together in the same bracket with a plus sign
Numbered lists represent procedures with sequential steps.
Bullet lists provide information, but do not involve sequential steps.
Indicates selecting the option (on a menu or dialog box, for example), that comes next.
For example, Start → Run means to open the Start menu, and then select Run.
Indicates critical information
Product Information
For information about all IOGEAR products and how they can help you connect without limits, visit IOGEAR on
the Web or contact an IOGEAR Authorized Reseller. Visit IOGEAR on the Web for a list of locations and
telephone numbers:
www.IOGEAR.com
6
Loading...