IOGear GBP201 User Manual

Wireless USB Print Adapter with Bluetooth Technology

User Manual (GBP201)

Welcome

Thank you for purchasing the IOGEAR wireless USB print adapter with Bluetooth technology . This print adapter is a first rate connectivity accessory designed to help reduce the frustration of dealing with cables in your home or office. IOGEAR wireless USB pr int adapter with Bluetooth Technology allows Bluetooth enabled computers to send print job wireless to USB printers.

are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.

T able of Contents

Package Content Overview Features Requirements Introduction Installation Operation Specification T echnical Support

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Radio and TV Interference Statement Limited Warranty

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○

2 3 4 5 6 7 17 18 19 20 21

This package contains: 1 Bluetooth print adapter

1 USB B-B cable 1 User manual 1 Warranty registration card

* If any items are damaged or missing, please contact your dealer.

Package Contents

Overview

IOGEAR’s palm sized single-port Wireless USB Print Adapter with Bluetooth Technology allows any Bluetooth enabled computer to wirelessly send print jobs to a USB printer. It complies with USB 1.1 specifications and the Bluetooth 1.1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 66 ft (20 meters).

This unit supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile), all of which resides on onboard flash memory.

This is a plug-n-play unit, it doesn’t require any special driver, plug it on the USB printer is all that entails.

• Allows any Bluetooth enabled computer to wirelessly send the print job to a USB printer

• Plug and Play, easy to install

• Bluetooth Class 2 device with a 66 ft range (20 meters)

• Supports data rate of 723 Kbps

• Supports Pico-net and Scatter-net and up 7 devices

• Complies with USB 1.1 specifications and the Bluetooth 1.1 specifications

• Supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile)

Features

System Requirements

• Printers with USB interface. * Multi function printers not supported.

• Bluetooth enabled computers.

+ 18 hidden pages