4-Bay RAID Storage Enclosure (3.5” SATA HDD)
Hydra Super-S3
User Manual
EN
October 16, 2013 - v1.1
PN: E15-57811AA031
Hydra Super-S3 Introduction
1 Introduction
1.1 Technical Specifications
1.1.1 Supported Hard Drives
• Up to four 3.5" SATA-I, SATA-II or SATA-III hard drives
• 80GB - 4TB per HDD
• Hard drives of identical capacities are recommended
• Support large volumes in excess of 2TB
1.1.2 Power Supply
• Internal power supply (UL, cUL, CE, TUV approved)
• Protection: OCP, OVP, Short
• Input: AC 90-264V, 47Hz/63Hz
• Output: DC +19V/4.74A
1.1.3 System Requirements (PC)
• USB: Windows XP or above
• FireWire: Windows XP or above
• eSATA: Windows XP or above
• Your computer must have the correct corresponding port (e.g. USB 3.0 host controller)
• eSATA Plug & Play support and Port Multiplier (Non-RAID only) for host controller
1.1.4 System Requirements (Mac)
• USB 2.0: Mac OS 10.2 or above
• USB 3.0: Mac OS 10.7 or above
• FireWire: Mac OS 10.2 or above
• eSATA: Mac OS 10.4 or above
• Your computer must have the correct corresponding port (e.g. USB 3.0 host controller)
• eSATA Plug & Play support and Port Multiplier (Non-RAID only) for host controller
Note
In order for the computer to access volumes larger than 2TB, both the hardware and OS need
to have the capacity to support large volumes (e.g. Windows 7 or Mac OS 10.4 and above).
1.2 About this Manual
Firmware, images and descriptions can slightly vary between this manual and the actual product
you have. Functions and features may change depending on the firmware version. To download
the latest manual, go to
http://www.inxtron.com/support/user-manuals.
1.3 Trademarks
• Microsoft, Windows XP and Windows 7 are trademarks of Microsoft Corporation.
• Apple Macintosh and Mac are trademarks of Apple Computer.
• All other third party brands and names are the property of their respective owners.
Page 1
Loading...