Triple Pack User Manual
Product Story
Sirius Loop ASL120 is InWin’s addressable RGB case fan.
The structure and fan blade design were
carefully considered to provide the optimal cooling
for your PC’s internal components.
Package Content
Screws x 12 3-Pin Headers x 3
Fan RGB One-Click Controller x 1
Sirius Loop Fans x 3
Installation Guide
01
02
Please make sure the power is off.
Install the fans in your PC case and mount them
in the designated areas.
The fan cable, Addressable RGB Y-Cable and their
03
counterparts are attached to each.
Please connect as followed:
Connect the fan’s Addressable RGB Y-Cable to a
motherboard’s 3-pin addressable RGB header.
Connect the attached fan cable to the motherboard’s
fan header.
Installing the 2nd fan: Connect the Addressable RGB Y-Cable
and connect it to the available 3-pin Addressable RGB header
on the previous fan. Connect the fan to the available fan
header from the previous fan.
Motherboard’s 3-pin
addressable RGB header
1st fan’s addressable RGB
Y-Cable
1st fan’s fan Cable
2nd fan’s addressable RGB
Y-Cable
Motherboard
Fan Header
04
Installing the 3rd fan: Repeat
2nd fan’s fan cable
If your motherboard does not support an addressable header, please use the included
Fan RGB One-Click Controller to connect to your PSU’s SATA cable and the fan’s
Addressable RGB Y-Cable in order to use the 11 different of lighting effects.
1st fan’s addressable RGB
Y-Cable
1st fan’s addressable RGB
Y-Cable
3-Pin LED header
2nd fan’s addressable RGB
Y-Cable
Fan RGB One-Click Controller
SATA Power Input
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
1 7
2 8
3 9
4 10
5
Rainbow
Breathing
Full Circle
Two-Tone Ring
Light at the end of the Tunnel
11
Diagonal Transition
LED-Red
LED-Green
LED-Blue
LED-White
6
Rotating LED Trio
*InWin reserves the right to change the lighting modes.
Troubleshooting
If your fan does not operate properly,
please follow the instructions below:
1.Please check your system’s power.
2.Please make sure all the connectors are connected
properly.
Important Notes
1.Please install the fan by following our instructions.
2.When storing the fan, please keep this product
away from high temperatures. Keep it away from
machines such as heaters that might cause high
temperatures.
3.Please do not put anything in the impeller.
4.Please do not modify the wires or the connectors
provided by InWin.
5.Please do not touch the fan blades when the fan
is in operation.
6.Please only use your fan in a computer case.
7.Please keep this product away from any liquids.
Specifications
InWin Sirius Loop Fans
Product Name
Part Number
Fan Size
Material
Rated Voltage
Rated Power
Sirius Loop ASL120
Triple Pack ASL120FAN-3PK
120 x 120 x 25mm
PBT
DC12V
1.2W
Rated Current
ADD RGB Rated Voltage
ADD RGB Rated Power
ADD RGB Rated Current
Speed Mode
Air Flow
0.1A
DC5V
1.25V
0.25A
PWM 500~1800 RPM
50CFM
Air Pressure
LED
Connector
Noise Level
Bearing Type
Life Expectation
1.67mm/ H2O
Addressable RGB
4-pin
27 dB(A) Max.
Long Lifespan Sleeve Bearing
>30,000 hrs
Net Weight
Package Dimensions(H x L x W)
Warranty
■
Specifications may vary based on different regions.
600 g
185 x 125 x 80mm
2 Years
Copyright © 2019 InWin Development Inc. All Rights Reserved.
Loading...