Page 1
Crown AC140 User Manual (2-Pack)
English
Page 2
Product Story
InWin’s first 140mm case fan, CROWN AC140 inherits the
technical marvels of InWin’s previous models. Saturated,
addressable RGB lighting effects and our patented modular
design makes this beautiful static pressure fan simple to
install. CROWN AC140 possesses innovative features to
maximize airflow and keep a cooled rig.
Page 3
Package Contents
A 1. CROWN AC140 Fans x 2
B 2. Screws x 8
C 3. Addressable RGB Y-Cable (Connect Motherboard to Fan)
800mm x 1
D 4. 6-6 Pin Long Connecting Wire (Connect Fan to Fan)
1000mm x 1
E 5. 6-6 Pin Short Connecting Wire (Connect Fan to Fan)
100mm x 1
F 6. Addressable RGB Modular Controller x 1
G 7. 3 Pin Header x 1
A x2
B x8
C x1
D x1
E x1
F x1
G x1
Page 4
Installation
1. Please make sure the power is off.
2. Use the 6-6 pin long/short connecting wire to chain the
fans together before installing them in your PC case and
mount it in the designated areas.
D E
3. Use Addressable RGB Y-Cable to connect the fan and the
motherboard. Please use RGB 3-Pin connector to an ADD
RGB header, and 4-pin fan connector to a fan header on
the motherboard. (Note: After connecting the Y-Cable
with the motherboard, all the fan functions will be
controlled by the motherboard. When connecting more
than 5 fans, please use another Addressable RGB Y-Cable
to connect the 6 or more fans.)
ASUS
Gigabyte
G
GND
KEY
D
+5V
KEY
+5V
D
GND
ADD RGB
Fan
C
Motherboard
Page 5
Installation
4. Use the Addressable RGB Y-Cable 6-pin header to connect
the first fan.
5. If you are adding more CROWN fans, please start from
step 4 to chain with the other fans.
D E
D E
A
Page 6
Installation
※ If your motherboard does not support an addressable
header, please use the included Addressable RGB Modular
Controller to connect the SATA and the Y-Cable to use the
11 different of lighting effects.
Controller Button
GND
KEYD+5V
SATA Power Input
GND
KEY
D
+5V
4-Pin Fan Connector
ADD 3-Pin
Fan
Motherboard
Tap the button to change the lighting mode. Continue press
the button to turn off the light.
1
2
3
4
Rainbow
Two-Tone Ring
Light at the end of the Tunnel
Rotating LED Trio
7
8
9
10
Full Circle
LED ‒ Red
LED ‒ Green
LED ‒ Blue
5
6
*InWin reserves the right to change the lighting modes.
Diagonal Transition
Breathing
11
LED ‒ White
Page 7
Troubleshooting
If your fan does not operate properly, please follow the
instructions below
1. Please check your system’s power.
2. Please make sure all the connectors are connected properly.
Note to use
1. Please install the fan by following our instructions.
2. When storing the fan, please keep this product away from
high temperatures. Keep away from machines such as
heaters that might cause high temperatures.
3. Please do not put anything in the impeller.
4. Please do not modify the wire or the connector provided
by InWin.
5. Please do not touch the fan blades when the fan is in
operation.
6. Please only use your fan in the computer case.
7. Please keep this product away from any liquid.
Page 8
Specifications
Product Name
Part Number
Fan Size
Materials
Rated Voltage
CROWN AC140
Single Pack - AC140FAN-1PK
Twin Pack - AC140FAN-2PK
140 x 140 x 25mm
PBT, PC
DC 12V
Rated Power
Rated Current
ADD RGB Rated Voltage
ADD RGB Rated Power
ADD RGB Rated Current
Speed Mode (PWM)
2.4W
0.2A
DC 5V
1.5W
0.3A
PWM 500~1500 R.P.M /
/ Noise Level
Air Flow
Air Pressure
LED
Fan Connector
Noise Level
18.1~ 32.5dB(A)
69.03 CFM
1.93mm/ H2O
Addressable RGB
6-Pin Modular
32.5 dB(A) Max.
Bearing Type
Life expectation
Net Weight
Package Dimension
(H x L x W)
Long Life Sleeve Bearing
60,000 hrs/ 40℃
185.6g
245mm x 160mm x 33mm
(Single Pack)
245mm x 160mm x 65mm
(Twin Pack)
Warranty
* Specifications may vary based on different regions.
2 year
Page 9
Loading...