User Manual
Product Story
The B1’s extremely small footprint is perfect for
small form factor builds such as HTPCs, light
gaming PCs or even a LAN rig. The integrated
ventilation in the exquisite streamline design
provides a better thermal solution, and you
can set up your PC vertically or horizontally!
The B1 comes with prebuilt InWin 200W, 80 PLUS
Gold PSU, InWin 80mm fan and an anti-dust filter.
Use the B1 to match your lifestyle!
Specifications
Model
Model Number
Colors
Case Type
Case Materials
B1
IW-CS-B1BLK-PS200W
Black
Mini ITX Tower
Tempered Glass, ABS
M/B Compatibility
Expansion Slots
Maximum Compatibility
Front Ports
Mini-ITX
N/A
CPU Heatsink Height: 60mm (Max)
1 x USB 3.0
HD Audio (CTIA ‒ SPK/Mic)
Internal Drive Bays
Thermal Solution
Compatibility
Power Supply
Compatibility
2 x 2.5"
1 x 80mm Side Fan ( Included)
InWin 200W PSU Included
AC Input/Efficient
Product Dimensions
(H x W x D)
Package Dimensions
(H x W x D)
AC Input: 100 - 240V / 80 PLUS Gold
108 x 302 x 238mm
4.3" x 11.9" x 9.4"
141 x 336 x 287 mm
5.6" x 13.2" x 11.3"
Net Weight
Gross Weight
■ InWin products comply with RoHS regulations.
■Specifications may vary based on different regions.
1.9 KG/ 4.2 lb
2.2 KG/ 4.9 lb
Specifications
InWin 200W 80PLUS GOLD PSU
Model
Total Power
Material
Type
PFC
IP-AD200C7-2
200W
SECC
ITX
Active PFC
Efficiency
MTBF (Hours)
AC Input
Operating Temperature
Range(°C)
80 PLUS Gold
> 100,000
100 ‒ 240Vac. 50-60Hz
0~40°C
Full Protection
Safety Certifications
Dimensions
(L x W x H)
OVP/UVP/SCP/OPP
TUV/cTUVus/BSMI/CB/CE/FCC/
EAC/RCM/CCC
52 x 40 x 170 mm
2.05" x 1.6" x 6.7"
Warranty
Connectors
3 Years
Motherboard 24-pin
CPU 4+4-pin
PCIE 6+2-pin
Peripherals
1
1
0
0
SATA
Floppy Power
■ InWin products comply with RoHS regulations.
■ Specifications may vary based on different regions.
1
0
Specifications
InWin 80mm Side Fans
Model
Fan Size
Materials
Rated Voltage
Rated Power
DF0801512SELN
80 x 80 x 15mm
PBT
DC 12V
2.16W
Rated Current
Speed Mode
Air Flow
Air Pressure
Connector
0.18A
PWM 600-2500 RPM
24.09 CFM
1.08mm/ H2O
4-Pin
Noise Level
Bearing Type
Life Expectancy
■ InWin products comply with RoHS regulations.
23.55dB(A)
Long Lifespan Sleeve Bearing
>30,000 hrs.
■Specifications may vary based on different regions.
Package Contents
1
3
4
2
5
1.B1 Chassis
2.InWin 200W
80 PLUS Gold PSU
3.InWin 80mm Side fan x 1
4.QR Code Card
5.Accessories Bag
Accessories Bag
a
c
b
d
a. Hexagon Head Screws X 8
b. 2.5” HDD Screws X 10
c. Cable Ties X 5
d. Foot-Stand Stickers X 4
Case Structure
3
4
6
5
1
2
7
1. Tempered Glass
2. Logo
3. Power Button
4. HDD/Power LED indicator
8
5. USB 3.0 Ports
6. HD Audio Port (CTIA ‒ SPK/Mic)
7. Removable Foot-stand
8. Release Panel
Case Structure
2
3
4
5
1
1. 2.5” Drive Bay
2. InWin 80mm Side Fan
3. Motherboard Mounting Area
4. InWin 200W 80 PLUS Gold PSU
5. Fan Dust Filter
Installation Guide
(Please follow the related chapters to assemble)
01
Opening the Chassis
Please release the two screws and
lift up the top cover.
02
Motherboard
Installation
Parts Required: Hexagon Head
Screws.
03
I/O Wires Installation
Switch/LED Connector
Black(P_LED) 1
Black(P_LED) 3
Black(P_SW) 5
Black(P_SW) 7
2 Black (HDD)
4 Black (HDD)
6 NC
8 NC
Key 9
10 NC
04
2.5” Drive Bays Installation
Parts Required: 2.5” HDD Screws
i.Release the two screws
and remove the bottom
cover.
ii.Install the 2.5’’ HDD screws
on your SSD screw holes.
iii.Attach the SDD in the
designated area and push
towards the SATA direction.
04
2.5” Drive Bays Installation
How to Uninstall the 2.5” Drive Bays
i.Push the panel
ii.Pull towards the direction
to release it.
05
Foot-Stand Stickers Installation (Optional)
Note: After installed, the stickers will be hard to remove. Please
use wisely, we suggest using the chassis on vertical position for
a better look.
Parts Required: Foot-stand Stickers
i.Release the two screws
and remove the bottom cover.
ii.Release the screws of the
foot-stand and detach the
foot-stand.
iii.Place the stickers on each
designated area.
06
Completing Installation
Parts Required: Cable Ties
*For more installation instructions, please scan the QR Code
or watch the video in the website link
https://youtu.be/cHm2nA2liQY
Notices and Warranty
■ Notices
1. Please follow the user manual for installation guidelines.
2. When installing the computer components, please use
antistatic precautions to prevent ESD (electrostatic discharge)
damage. Failure to take the necessary precautions may result
in injury to the installer and/or damage to the machine.
Incorrect installation may burnout the motherboard and other
system components.
3. To avoid any damages, please do not use this product for any
other purpose than its intended use.
4. Any modifications may damage the product.
5. Please handle with care when moving the case.
6. When storing the case, please keep this product away from
high temperatures. Keep away from machines such as heaters
that might cause high temperatures.
7. Please do not put anything in the impeller.
8. Please do not touch the fan blades when the fan is in operation.
Please only use your fan in the computer case..
■ Warranty
* For more detailed warranty information, please visit the
InWin retail website at www.in-win.com.
* The actual product is subject to change without prior
notice. InWin Development Inc. reserves the right to
make final modifications.
Copyright © 2020 InWin Development Inc. All Rights Reserved.
Loading...