Inwin 905 User Manual

User Manual

Product Story

The InWin 905 joins the 9-series lineup of elegant

aluminium and tempered glass cases. It can support up

to an E-ATX motherboard despite being an ATX model.

Its stylish design can support multiple liquid cooling

options for optimal cooling performance

Specications

Model 905

Part Number

Colors

IW-905-SILADD
IW-905-SILOLED

Silver (Addressable RGB)
Silver (OLED)

Case Type Mid Tower

Materials Aluminium, Tempered Glass, SECC

M/B Compatibility 12” x 13” E-ATX, ATX, Micro-ATX, Mini-ITX

Expansion Slots PCI-E x 7

Maximum Compatibility

Front Ports

Internal Drive Bays

VGA Card Length: 330mm
CPU Heatsink Height: 160mm

USB 3.1 Gen 2 Type-C x 1
USB 3.0 x 2

HD Audio

LED Lighting Control Switch or OLED Screen

1 x 3.5"

2 x 2.5" (2 pre-installed, max. up to 4)

Thermal Solution
Compatibility

Power Supply
Compatibility

Product Dimensions
(H x W x D)

Package Dimensions

1 x 120mm Rear Fan / 120mm Radiator

2 x 120mm Front Fan / 240mm Radiator
2 or 3 x 120mm Bottom Fan /240 or 360mm Radiator

PSII: ATX12V

- Length up to 230mm

502 x 215 x 508mm

19.7" x 8.4" x 20"

337 x 611 x 592mm

(H x W x D)

13.2" x 24" x 23.3"

Net Weight 11.98kg / 26.4lb

Gross Weight 14.26kg / 31.44lb

* Our products comply with RoHS regulation.

* Specications may vary based on different regions.

* Extra fee for optional parts.

Package Contents

1. 905 Chassis

2. QR Code Card

Package Contents

3. Accessories Bag

a. Motherboard Stand-os x7

b. Motherboard Stand-o Socket x1

c. Hexagon Head Screws x18

d. 2.5" SSD Screws x18

e. 3.5” HDD Screws x6

f. PSU Screws x6

g. 3-PIN ADD Header x1

h.Water-Cooling System Washers x24

i. Cable Ties x10

j. Graphics Card Holder x1

Case Structure

4

7

5

6

3

2

1

1

2

3

8

Power Button

HDD Indicator

USB 3.0 Ports

5

6

7

USB 3.1 Gen 2 Type-C Port

Audio Ports

(Earphone and Microphone)

LED Mode/OLED Screen

Control Button

4

Tempered Glass Side Panel

8

Fan Dust Filter

Case Structure

10

9

11

12

9

10

3.5”/ 2.5” Drive Bay

CPU Cooler Cut-Out Hole

11

12

Power Supply Mounting Area

Shock-Proof Stand

Case Structure

17

13

16

14

15

18

13

14

15

Motherboard Mounting Area

PCI-E Expansion Slots

Graphics Card Holder

Mounting Holes

16

17

18

Front Fan/ Radiator Mounting Area

Rear Fan/ Radiator Mounting Area

Bottom Fan/ Radiator Mounting Area

Installation Guide

* Please follow the related chapters to assemble.

* Please use original provided accessories to avoid damage to the product.

1. Opening the Chassis

To remove the tempered glass side panel, simply
press the quick-release buttons at the rear of the

chassis.

2. Power Supply Installation

Parts Required: PSU Screws
Please remember to check the size of your power supply. It must be mounted at the bottom of the

chassis.

Installation Guide

3. Motherboard Installation

Parts Required: Motherboard Stand-offs,

Motherboard Stand-off Socket, Hexagon Head

Screws

4. Expansion Card Installation

Parts Required: Hexagon Head Screws, Graphics Card Holder

After the user installs the graphics card, use the graphics card holder to support it.

Installation Guide

5. I/O Wires Installation

RESET SWPOWER LED

POWER SWDepends on Motherboard

H.D.D. LED

HD Audio Header

POWER SW RESET SWPOWER LED

USB3.0 Connector

Installation Guide

LED Display

Ensure the edge of the PSU connector is properly aligned with the edge of the LED light connector.

USB-Strip 3-Pin ADD Header

Please plug in USB port on motherboard Please connect the 3-Pin ADD Header with ADD

supported Fan cables.

6-1. Instructions For ARGB Display

If your motherboard supports ARGB, please follow the sign’s direction and insert ARGB display connector into the
3-pin ARGB header directly on the motherboard.

MB

FAN

damage to the computer system.

SATA

Connector: Please insert to the ARGB supported motherboard.

Connector: Please insert to fan or lighting display only, do not insert to the motherboard or it may cause

Connector: The front LED display will display ARGB lights once SATA cable is connected.

Installation Guide

6-2. The Instructions of Type-C Cable

If your motherboard supports Type-C, please connect the Type-C connector with the header directly on

the motherboard.

Type-C Cable

Installation Guide

7-1. 2.5” Drive Bays Installation

Parts Required: 2.5” HDD Screws

7-2. 3.5” Drive Bays Installation

Parts Required: 3.5” HDD Screws

Installation Guide

8. Fan / Liquid Cooling Radiator Installation

Parts Required: Water-Cooling System Washers

Fan Compatibility List

120mm

Front 2

Rear 1

Bottom 3

2

Note* There are two installation options:

1. 1 x 120mm front fan & 3 x 120mm bottom fan

2. 2 x 120mm front fan & 2 x 120mm bottom fan

1

1

2

9.

Completing Installation

Parts Required: Cable Ties

ARGB Lighting Modes

When the computer turns on, the 905 system will lead users into two lighting modes. (The
lighting modes depend on the features of the motherboard.) This allows users to switch
between:

1. InWin LED (Default Mode)

The InWin LED mode comes with 17 distinct lighting effects. If your motherboard doesn’t

feature ARGB headers, the lighting will be placed on InWin LED mode. In this mode, you can

still switch to different colors such as: red, green, blue, purple, white and multicolor to your

personal preference, and display 17 distinctive lighting effects with a variety of luminous styles.

2. ARGB

If your motherboard supports ARGB headers, please connect the 3-pin addressable cable

directly to the motherboard (refer to step 6-1), it allows you to sync all ARGB enabled

components with the motherboard software.

Notices and Warranty

■

1. Please follow the user manual for installation.

2. When installing the computer components, please use the antistatic precautions to

prevent ESD (electrostatic discharge) damage. This can cause injury to the installer and/

or damage to the machine. Incorrect installation may burnout the motherboard and other
system components.

3. When removing the tempered glass side panels from the rear quick-release button,
please handle with care to prevent side panels dropping off and cause any injury.

4. Please avoid unnecessary insertions and extractions to the ARGB cable as it may

Notices

damage the pins.

5. To avoid any damages, please do not use this product for any other purpose than its

intended use.

6. Any modications may damage the product.

7. Please remove all internal devices before shipping or moving. (Including power supply,
hard drives, motherboard, CPU, etc)

■

Warranty

* For more detailed warranty information, please visit the InWin retail website at

www.in-win.com.
* The actual product is subject to change without prior notice.

InWin Development Inc. reserves the right to make any nal modications.

Copyright © 2019 In Win Development Inc. All Rights Reserved.