Series 940
Thin Sensor
Overview
Read entire instruction guide before starting installation.
Docking Station
Small Digital Camera (4 prongs on bottom)
System Components
1. Series 940 Camera Puck (EC9100, not included)
2. Thin Sensor (EC9138 or EC9139)
Docking Station
DSLR
(magnet on bottom)
3. Docking Stations (2 included)
4. Anti-Theft Bracket (included)
5. IR Key (not included)
Anti-Theft Bracket
Setup in 5 easy steps:
1. Determine which docking station to use: small digital
camera (use docking station with 4 prongs on bottom)
or DSLR camera (use docking station with magnet on
bottom)
Thin Sensor with
Lens Sensor
EC9139
2. Attach docking station.
Note: Once docking station is attached to sensor, it is permanently
attached.
3. Attach merchandise to anti-theft bracket and sensor.
Ti ghten sc rew.
4. Arm puck with IR key.
System Overview:
Thin Sensor
EC9138
IR Key
The Thin Sensor secures and powers cameras.
TOOLS
Multi Tool
AF6313
2 3
T-27 Bit
(included in
multi tool)
Series 940
Camera Puck
DIGITAL CAMERA INSTALLATION
(Use docking station with 4 prongs on bottom.)
Select docking station with 4 prongs on bottom.
1
Firmly snap docking station into stem.
Note: Once docking station is attached to stem, it is
permanently attached.
Stem
4 Prong Docking
Station
4 5
Firmly snap stem into puck.
2
Align anti-theft bracket and camera to sensor. Tighten
3
SECURELY with multi-tool (use T-27 bit). DO NOT strip
plastic threads in camera mount.
Note: ALWAYS use anti-theft bracket.
Anti-Theft Bracket
T-27 Bit
6 7
Plug power connector* into camera and sensor.
4
*To determine which power connector is needed for the
merchandise: 1) visit invuesecurity.com, 2) click on login
and login, 3) click on power connector selector.
Place sensor onto docking station. Plug sensor cord
5
into puck.
8 9
DSLR CAMERA INSTALLATION
(Use docking station with magnet on bottom.)
Firmly snap stem into puck.
1
10 11
Select docking station with magnet on bottom.
2
Firmly snap docking station into sensor.
Note: Once docking station is attached to sensor, it is
permanently attached.
Magnet
Align anti-theft bracket and camera to sensor. Tighten
3
SECURELY with multi-tool (use T-27 bit).
Note: ALWAYS use anti-theft bracket.
Anti-Theft
Bracket
T-27 Bit
12 13
Plug power connector* into camera and sensor.
*To determine which power connector is needed for the
merchandise: 1) visit invuesecurity.com, 2) click on login
and login, 3) click on power connector selector.
Wipe merchandise with alcohol wipe provided.
54
Let it dry completely.
CONTENTS: One pad saturated in
Isopropyl Alcohol
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
KEEP AWAY FROM EYES
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
AND FIRE
CHILDREN
75%
14 15
Remove clear film from lens sensor. Press firmly for at
6 7
least 10 seconds. Wrap zip tie around lens tightly.
Place docking station onto sensor. Plug sensor cord
into puck.
16 17
SD0123 Rev1 05 /20/13
www.invuesecurity.com
Corporate Office (North America) // 704.752 .6 513 • 888.55.INVUE
Europe, Middle East & Africa // + 31. 23 .8 9 00150
Asia Pacific // +852.3127.6811
Latin America // +52.55.9000.3957
© 2013 InVue Security Products Inc. All rights reserved.
InVue is a registered trademark of InVue Security Products.
Loading...