Invotel SX9800 User Manual

®

Problems Possible Cause / Solution

A B

OFF ON

1.

Player not working or
stopped working

2. No audio on hold

3. Audio quality is poor

4.

Cannot hear the
monitor speaker

• Unplug the power connector wait 30 seconds then plug it back
in. make sure the connector is plugged in securely. Be sure to
observe the LED lights are dancing with volume up.

• Be sure MX9008/MX9017 card is inserted all the way into it’s slot
securely

• Check audio cord; try re-inserting it again, adjust the volume on
player clockwise to hear it. Try testing player by SPEAKER set to
ON. Try MODE A setting.

• Verify that the audio cord is plugged in securely Make sure the
audio volume is not too loud, adjust the volume control counter
clock wise to correct the problem.

• Set Volume to Medium. Adjust the TONE. Try the other RCA jack

• Be sure the recording volume is correct adjust your audio source

volume.

• Set SPEAKER to ON, MODE A, VOLUME max, confirm you
can hear it. Be sure to re-adjust the VOLUME back to correct
level for on hold-

User Manual
Invotel SX9800 Rev 01

Digital Audio System Player/Recorder

• Insert the MX9008 or MX9017 Flash card into the slot as shown

insert the card all the way into the blue connector)

• If you need to record into SX9800 connect your “audio source” to the
“Audio IN” jack of the SX9800 using the provided 3.5mm to 3.5mm audio
cord & the “Y” patch cable.

• Plug one end of the RCA audio cable into the 8 Ω Red RCA connector
and the other end into your PBX phone system “MOH” RCA connector.

(If you have regular Non-PBX telephones, plug the other end into the Music-On-Hold
adapter “Audio In” RCA connector instead)

• Set the Volume to mid level on the player as shown.

• Set the MODE switch to A or B

• Plug the included AC adapter. (110V AC to 5-12V)

(be sure to

Warranty

This product is warranted against defects for a period of Three (3) years from the date of
original invoice. We will repair/replace the product with no charge for parts or labor within this
time. To obtain warranty service the product needs to be returned freight prepaid by the
customer with a copy of original invoice. This warranty does not apply if in the sole opinion of
Innovative Telecommunication Technology, the product has been tampered with or damaged by
lightning or any other acts of nature, misuse, neglect or unauthorized service.

EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR OTHERWISE,INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OR MERCHANTIBILITES OR FITNESS FOR A SPECIAL PURPOSE.
IN NO EVENT SHALL INNOVATIVE TELECOMMUNICATION TECHNOLOGY (INVOTEL) BE
LIABLE FOR LOSS OF PROFITS OR BENEFITS , INDIRECT, SPECIAL, CONSEQUENTIAL
OR OTHERWISE ARRISING FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE.

1112 Montana Ave Suite 250 Santa Monica, CA 90403 USA

Toll-Free: 800-747-0708 Tel: [phone] Fax: [phone] http://www.invotel.com

P8

SX9800

TONE

NXT/REC

FLASH MEMORY

Technology

Flash Card

MIC

IN

DIGITAL

MODE

“Y” Patch cable

3.5mm to 3.5mm audio cord

8Ω 600Ω

TELEPHONE SYSTEM

Volume

AUDIO

Max

MOH Port

PC

speakers

9VAC

IN

PC

Speaker

OUT

SPEAKER

110 V

If the MX9008/Mx9017 card is already pre-recorded, audio playback starts
automatically as soon as power is connected, the LED lights dance ON.

Advanced Features:

Player /repeater with full recording capability
Tone control for supper BASS
Dual Banks
Dual Outputs 8Ω , 600Ω/ 1200Ω
Built-in SPEAKER Transducer
Visual playback indicator with dancing multi-color LEDs
1000 mili Watt amplifier

Package Content:

SX9800 Digital Player/Recorder Unit
Power adapter 110v AC to 9-12v AC/DC 100-600 ma
RCA to RCA audio cord 6 feet long

3.5mm male to 3.5mm male audio cord 6’
User’s Manual
MX9008/MX9017 Flash Card (optional)

MX9008/ MX9017 Flash Cards “True Audio Card”

The MX9008/MX9017 card is a Flash card that is usually pre-recorded with
the audio prior to your installation and it holds the audio all the time even if
power is removed. When the power is restored the play back automatically
resumes from the MX9008/MX9017 card.

You may remove the power prior to inserting the card into the slot.
If you need to re-install the MX9008/MX9017 card or install another
MX9008/MX9017 just remove it and then plug the new one IN. If you had any
problem remove the power by un plugging the AC adapter from the player,
Install the new MX9008/MX9017 card, then apply the power.

Unlike other Flash based cards that compress the audio, voice and audio
signals are recorded directly into solid state memory in the MX9008/MX9017
card in their natural, un-compressed form, providing superior quality voice
and music reproduction. MX9008/MX9017 card has 100 -year retention time
at zero power and can be re-recorded 100,000 times.

Specifications:

File Formats supports any sound file format such as Windows .wav,

MP3, WMA, etc.

Frequency response 20Hz to 20 KHz.

Sampling rate 8-bit/16-bit uncompressed PCM @ 8, 11, 12, 16, 22, 24,

32, 44 & 48 KHz (direct internal A to D 16 bit 8KHZ)

Distortion less than 0.1% THD

Audio Quality supports better than CD Quality at 188 KB/s

Special effects: supports Windows Media Files and SRS WOW Effects

Memory Capacity 1 to 34 minutes (17 minutes @ full 188 KB/s sample

rate).

Memory Type Multi-level Flash, 100 years retention time at no power,

100K re-recordable

Playback auto-repeat

Message loading: card load (MX9008/MX9017)

Recording: Automatic or manual push button

Power supply 110VAC 60 Hz. To 9-12 VAC or DC 100 to 600 ma

Audio output 1000 mili watts, Mono RCA jack, adjustable volume, 2V p-

p @ 8Ω 4V p-p @ 600Ω, 8V p-p @1200Ω

Size: 5.5” x 4” x 1.5” (L x W x H)
Size
(MX9008/MX9017): 1.5” x 1.5” x 0.37” (L x W x H)

Color: Black

Weight: 0.5 pounds (0.80 pounds with power supply)

please note: use the royalty-free music titles to avoid annual licensing
payments to ASCAP and BMI for playing those titles on-hold

ii

P2

P7