Involight SM2000 User Manual [ru]

POWER SNOW MACHINE

Please read over this manual before operation the machine

SM2000

USER MANUAL

Change the shooting angle

Thanks for using the Snow Machine. For assuring your safety and
using the machines well, please read over this instruction carefully
before operation.

Information:

Voltage: 220V, 50-60HZ
Power consumption: 1500W
Approx. Snow Flake Output: 100m3
High of Blow: upwards of 15m
Fluid consumption: approx. 350 ml/min.
Used Fluid: Snow fluid
Size: 62x58x97cm
Weight: 33kg
Continuous working

Operation:

1. Open the flight-case and put out the snow machine.

2. Put the machine to the best flatness position.

3. According to your needs, choosing the shooting angle of the
machine.

4. Put the feeding fluid pipe into the bottle of snow liquid.

5. To work the machine, please turn on the power of fan first, and then
press the switch of the snow.

6. To stop the machine, you must stop the snow swift, and then turn off
the fan.

4. Don’t spray the snow directly to people.

5. Power off before the snow liquid is used up.

6. A certain noise is within common range when the machine is
working.

7. Keep clean.

Function

The pump and fan
Swift of snow
Screw down it to connect the two parts of the

machines

Swift of fan

Attention：

1. The power must same as located.

2. Turn off the machine and disconnect from current if not used or
nobody is with it. Moreover, the machine is designed for adult use
only. Install away from children.

3. Please use the high quality Snow Liquid.