Inviting Homes Salt Lamp Instruction Manual

Salt Lamp Speaker

Instruction Manual

Please carefully read the safety instructions before using the salt lamp.

Table of Contents

• Safety Guide

• Introduction

• Part Names

• Preparations

• Listening to Music Via Bluetooth Connection

• Listening to External Sources

• Troubleshooting

• Care and Maintenance

• Specifications

• Terms of Use

Safety Guide

• BREAKABLE: Handle with care.

• NOT FOR HUMAN CONSUMPTION.

• BEFORE FIRST USE: Inspect lamp. DO NOT USE if lamp, cord, plug, or parts are damaged or defective.

• Always turn off all controls before unplugging the lamp.

• Always unplug lamp before handling, cleaning, removing, replacing, or adjusting parts.

• Keep away from water.

• DO NOT USE if lamp has been wet or exposed to water as this may result in electric shock or electrocution.

• Avoid using the lamp in high humidity environments.

• Intended for indoor use only.

• Unplug lamp before adjusting or removing parts.

• WARNING: KEEP OUT OF REACH OF CHILDREN AND PETS.

Introduction

• Confirm the package contents and thoroughly read this manual before using your lamp.

• For your own safety, please follow the instructions for daily usage and maintenance.

• Illustrations may differ from the actual item depicted.

• NOTE: Always place Himalayan Salt Lamps on top of a coaster, placemat, tray, or similar item to protect your

furniture. Himalayan Salt Lamps sometimes “sweat” which may damage furniture and certain types of wood.

• Step 1: Place the lamp on a flat and stable surface. Keep out of reach of children and pets.

• Step 2: Plug in your lamp.

• Step 3: If your lamp includes a dimmable switch, adjust the lighting to your desired level of brightness.

•

Step 4: Unplug the lamp when not in use for extended periods of time.

• Supplied Accessories: 110V 60Hz 15W Incandescent Light Bulb

Part Names

 Speaker Power

- Press and hold to turn the speaker ON/OFF

 Mode Selection

- Press to switch between Bluetooth (Blue indicator light will turn on) or AUX

(Red indicator light will turn on)

- Press and hold to reset Bluetooth

 Volume -

- Press and hold to decrease the volume

- The lamp plays a tone when it reaches the maximum volume level

④ Volume +

- Press and hold to increase the volume

- The lamp plays a tone when it reaches the minimum volume level

⑤ Light Power and +/-

- Press to turn the light ON/OFF

- Press and hold to adjust the lamp’s brightness

⑥ Indicator

- Blue light on: Bluetooth mode

- Blue light blinking: Bluetooth disconnected and waiting for pairing

- Red light on: AUX mode

⑦ Loudspeaker
⑧ Light cup
⑨ Bulb Cap
⑩ Incandescent Light Bulb

⑪ AUX

- Connects to an external device via a commercially available 3.5 mm stereo

mini jack.

⑫ AC IN
⑬ AC Power Switch

- Completely turn on or shut off internal power supply

⑭ Condensate water drainage