ULT-C2BIRM2812 2 Megapixel/1080p TVI Outdoor Bullet, 2.8-
12mm Motorized Lens, 150’ IR Range, Dual Voltage
Features
• 2 Megapixel (1920 x 1080) Resolution
• Motorized 2.8-12mm Lens
• True Day/Night
• True WDR 120dB
• 150’ IR Range with EXIR Technology
• Up The Cable (UTC) Function
• IP66 Weather Resistant
• Withstand up to -40° Operation
• Dual Voltage
Mounting Options
IUM-BRJB1:
Large Bullet Junction Box #1
IUM-BRCM1*
Corner Mount #1
IUM-BRPM1*
Pole Mount #1
Ordering Information
ULT-C2BIRM2812: 2 Megapixel Motorized Bullet, 2.8-12mm
Model Number ULT-C2BIRM2812
Image Sensor 1 / 3" Progressive Scan CMOS
Signal System PAL / NTSC
Eective Pixels 1920(H)*1080(V)
Min. Illumination
Shutter Speed 1/25 s to 1/50,000s
Lens (Angle of View) 2.8-12mm @ F1.4, (92° – 32°)
Auto Iris Yes
Lens Mount φ14
Day & Night IR Cut Filter with Auto Switch
Wide Dynamic Range DWDR
Synchronization Internal synchronization
Video Frame Rate 1080p @ 30fps
HD Video Output 1 Analog HD output
S / N Ratio More than 52dB
Scene Indoor, Outdoor, Indoor1, LOW-LIGHT
Camera ID On/o (15 characters, position programmable)
AGC Support
D/N Mode Color/BW/EXT
White Balance ATW, AWC-SET, Indoor, Outdoor, Manual
Privacy Mask On/O, maximum 2 zones
Motion Detection On / O, maximum 4 zones
BLC Support
Anti-icker On/o
Language
Function
Working Temperature /
Humidity
Humidity Humidity 90% or less (non-condensing)
Power Supply 12 VDC; 24 VAC
Power Consumption 12V DC: Max. 7W ; 24V AC: Max. 10W
Housing IP66
IR Range Up to 150 ft
Communication
Dimensions 3.62 x 3.34 x 10.6 in (91.94 x 84.83 x 269.2mm)
Weight 1.59 lbs (700g)
0.01 Lux @ (F1.2,AGC ON),0 Lux with IR 0.014 Lux @
(F1.4,AGC ON),0 Lux with IR
English, Japanese, CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, Russian, Portuguese,
Dutch, Turkish, Hebrew and Arabic
Eclipse, Digital noise reduction, Digital zoom(62x), Slow
shutter, Mirror, Defog, Defect pixel correction, SMART
D-ZOOM
-4 °F – 140 °F (-20 °C – 60 °C)
Up the coax(need UTC controller), Protocol: Pelco-C
(Coaxitron)
*To use these mounts with the selected cameras drill the holes needed into the mount using the diagram included with the camera.
InVid Tech, reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
Innovative Video Technology 355 Oser Avenue, Hauppauge, NY 11788 | 631-388-5700 | sales@invidtech.com | www.invidtech.com