InVid INVID-BATTERYPAK Specsheet

INVID-BATTERYPAK

Features

• 12.5V, 98Wh Li-Ion Battery

• Supports up to 6A Continuous Draw

• Regulated 7.4 & 12.5 VDC Barrel Outputs

• Magnets to Easily Mount to IPM-TABLETPED &

IPM-TABLETPED2 Pedestal Mount

INVID-BATTERYPAK is a 12.5V, 98Wh, Lithium-Ion battery pack
with a 6-amp continuous draw. It consists of a 2.1mm regulat­ed 7.4V DC output, 2.5mm regulated 12V DC output, and a
5-volt USB port.

The 7.4v output provides common power output for the
PAR-P2TEMPTABLET and most DSLRs cameras that utilize small

7.4v Li-Ion battery packs. There are a variety of dummy bat­tery cables (sold separately) that connect into that 7.4-volt
output. In addition to powering the camera through the 7.4v
output, there is a 12-volt output to power monitors, lights, etc.
The 5-volt USB port can be used to charge mobile devices as
well as power any 5v accessories (example audio recorders).
INVID-BATTERYPAK has a 4 segment LED display that shows
battery level. Located on the side, it’s easy to read during
production.

INVID-BATTERYPAK includes a small, lightweight charger which
provides a quick charge current of 2A. There are magnets on
the back of the battery that allow for easy mounting to the
pedestal mount (IPM-TABLETPED & IPM-TABLETPED2). This por­table charger features a 2.5mm DC plug on one end and U.S.
wall plug on the other, and it supports 90-240 VAC worldwide
input voltage. The charger also has an LED indicator on the
front that changes from red to green when your battery is fully
charged.

Ordering Information

INVID-BATTERYPAK: 12.5V, 98Wh Li-ion Battery

A Y-Lead is available to connect two batteries together to
power the InVid Tech Tablet (PAR-P2TEMPTABLET).

Accessories:
INVID-BATY: Y-Lead to Connect (2) Batteries to the PAR-P2TEMPTABLET

Innovative Video Technology 355 Oser Avenue, Hauppauge, NY 11788 | 631-388-5700 | [e-mail] | www.invidtech.com