Inverto IDLU-UST112-CUO1O-8PP, 5050, Unicable Multiswitch Installation manual
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
Made in China
Designed in LU
TM
Unicable™ Multiswitch
IDLU-UST112-CUO1O-8PP
Item: 5050
Installation manual
1
Thank you for purchasing Inverto’s advanced Unicable multiswitch and we are certain it will meet
110
your expectations. Before installing and operating the product, please read the following instructions and recommendations. We suggest that you keep this manual for future use.
Warranty
This Unicable multiswitch is designed for the distribution of satellite and terrestrial television and
radio signals in home installations. The warranty does not apply for products used for other purposes than those specified herein. The user/installer shall be responsible for any damage incurred
as a result of not using the product according to the instructions in this manual.
Installation location
The product shall be installed on a wall or other hard inflammable surface.
The product shall be in no case held only with the connected cables.
Place the product in a dry environment where it is not exposed to rain or running water.
Do not install the product close to heat sources or in places exposed to direct sunlight.
Product installation
The following diagram may assist you when drilling the holes:
To connect the product inputs and outputs use
high-quality coaxial cables designed for satellite reception and F-connectors. Use a high-shielding coaxial
cables with minimum 90dB.
If you use wall sockets to loopthrough the 8 user bands,
make sure the wall sockets were designed for satellite
reception compatible with Unicable technology and
allows bidirectional signal propagation.
151
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
TM
Made in China
Designed in LU
The following diagram describes the installation configurations supported by the product:
Quattro
LNB
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
TM
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Made in China
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Designed in LU
Satellite/Terrestrial Loop-Through loss: 3dB
Legacy
Terminated
Outputs
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
Legacy
TM
Made in China
Designed in LU
AC/DC
power adapter
AC/DC
power adapter
UB 7 UB 5 UB 3
UB 6 UB 4 UB 2
UB 7 UB 5 UB 3
UB 6 UB 4 UB 2
x8 User bands
x8 User bands
UB 1
UB 0
UB 1
UB 0
2
Loading...