Inverto IDLB-QUDL42-UNI2L-1PP User Manual

Click to rotate

BLACK Unicable

Unicable Quad 40mm LNB, 2 Legacy

Models:
IDLB-QUDL42-UNI2L-0PP
IDLB-QUDL42-UNI2L-1PP (Inc. 1 splitter)
Item: 3015

A member of the innovative and award winning Unicable LNB series this highly competitive product enables the connection of
up to 4 STBs using a single cable (providing STBs are Unicable compliant) over its Unicable port as well as two more STB over its
“Legacy” port.
The product is supplied with one splitter unit (optional) for a flexible distribution of the satellite signal at home. It was specifically
designed for the European DTH markets, and provides optimized reception capabilities for High Definition transmissions. Man­ufactured to the highest industry quality standards and with excellent noise figure and phase noise performance, this LNB is an
ideal solution for multi-room satellite reception and is a product of choice for most leading digital satellite TV operators across
Europe. For more information on the Unicable technology and its advantages please refer to: www.inverto.tv/unicable

Main Features:

■

Low phase Noise HDTV-DVBS2 compliant

■

Low Noise Figure

■

Low Power consumption

■

Very high Cross Polarization Isolation

■

Very high Frequency stability

■

2 Legacy ports

Technical Specifications:

Low Band Input Frequency Range
Low Band Output Frequency Range
Low Band LO Frequency
High Band Input Frequency Range
High Band Output Frequency Range
High Band LO Frequency
Noise Figure
LO Initial Accuracy
LO Temperature Drift
Phase Noise (@ 10 kHz)
SCR Conversion Gain
Legacy Conversion Gain
Gain Ripple (Over 26 MHz Bandwidth)
Gain Variation (Over Full Band)
Image Rejection
1 dB Compression Point (@ Output)
Cross Polarization Isolation
Output VSWR
In-Band Spurious
Output IF Channel 1 (SCR0)
Output IF Channel 2 (SCR1)
Output IF Channel 3 (SCR2)
Output IF Channel 4 (SCR3)
Channel Isolation
Legacy Ports
SCR’s Control Signals
Legacy Switch Voltage Control
Legacy 22 k Sensitivity
Current Consumption
Operating Temperature
Output Impedance
Output Connector
Weight

10.7 ~ 11.7 GHz
950 ~ 1950 MHz

9.75 GHz

11.7 ~ 12.75 GHz
1100 ~ 2150 MHz

10.6 GHz

0.7 dB Max.
+/- 1.0 MHz Max.
+/- 2.5 MHz Max.

- 90 dBc / Hz Max.
57 dB Min.
55 dB Min.
+/- 0.75 dB
+/- 4 dB Max.
40 dB Min.

0.0 dBm Min.
22 dB Min.

2.5 : 1

- 60 dBm Max.
1210 MHz
1420 MHz
1680 MHz
2040 MHz
20 dB Min.
1
DiSEqC command extension based on EN-50494
< 14.2 V (Vertical), > 15 V (Horizontal)
220 mV Min.
250 mA Max. @ 13.5 V

- 30 °C ~ + 60 °C
75 Ω
F-Type (Female)
350 g

Product diagram:

For purpose of brevity, some product descriptions in this sheet remain at platform level and may not be referred to as detailed
datasheets of the products. Inverto Digital Labs reserves the right to amend, omit or add products, product-lines, and / or fea­tures without notice. As product specifications may change without notice, always contact Inverto to obtain the latest product
specification sheets.

For further details contact: [e-mail]

FTA Communication Technologies S.a r.l Tel. [phone] Fax. [phone]

www.inverto.tv

V010714