inveo IND-M1 User Manual

User manual

RFID IND Modbus-Mif

Soft >= v1.40

INVEO s.c.

ul. Rzemieślnicza 21

43-340 Kozy

Poland

mobile: [phone]

www.inveo.com.pl
[e-mail]

Dear Customer!

Thank you very much for choosing our product. Before its use, please read these
instructions carefully. Here you find the most appropriate ways of dealing with this
device, the basic principles of safety and maintenance. Please also keep the user manual
so that you can read it during later use.

Remember!

The manufacturer is not liable for any damage caused by improper use of
the device which differ from its intended purpose, or improper handling, as well
as a fault of driver resulting from improper use.

User manual RFID IND Modbus Mif Page 2 z 22

[B03]

Table of contents

1 PRELIMINARY INFORMATION...................................................................................................................4

2 APPLICATIONS OF THE DEVICE................................................................................................................5

3 WARRANTY AND LIABILITY OF THE MANUFACTURER...................................................................5

4 SAFETY GUIDELINES.....................................................................................................................................6

4.1 POWER SUPPLY...................................................................................................................................................6

4.2 STORAGE, WORK CONDITIONS................................................................................................................................6

4.3 INSTALLATION AND USE OF THE READER.................................................................................................................6

4.4 UTILIZATION OF THE READER................................................................................................................................6

5 CONSTRUCTION OF THE MODULE...........................................................................................................7

5.1 GENERAL FEATURES............................................................................................................................................7

5.2 GENERAL VIEW...................................................................................................................................................8

5.3 VISUAL AND SOUND SIGNALS................................................................................................................................8

6 DEVICE CONFIGURATION...........................................................................................................................9

6.1 OUTPUTS.........................................................................................................................................................10

6.2 INPUTS............................................................................................................................................................11

6.3 LEDS AND SOUND SIGNALING CONTROL...............................................................................................................11

6.4 CONTINUOUS READ MODE.................................................................................................................................12

6.5 RS485 – CONFIGURATION OF TRANSMISSION........................................................................................................12

7 MODBUS API..................................................................................................................................................13

7.1 MIFARE TAG STRUCTURE....................................................................................................................................13

7.2 MODBUS ADDRESS...........................................................................................................................................14

8 MEMORY BUFFER.........................................................................................................................................17

8.1 MEMORY BUFFER ADDRESSING............................................................................................................................17

8.2 BUFFER DATA REPRESENTATION (ENDIANESS).......................................................................................................19

9 BLOCK KEY.....................................................................................................................................................20

10 EXAMPLES.....................................................................................................................................................21

10.1 STEP BY STEP CARD ID READ...........................................................................................................................21

10.2 STEP BY STEP READ OPERATION.........................................................................................................................21

10.3 STEP BY STEP WRITE OPERATION........................................................................................................................21

10.4 STEP BY STEP MULTIPLE TAGS...........................................................................................................................22

11 DESCRIPTION OF TERMINALS...............................................................................................................22

User manual RFID IND Modbus Mif Page 3 z 22

[B03]

1 Preliminary information

Before starting work with the device, read The User manual and follow the

instructions contained therein!

Description of visual symbols used in this user manual:

This symbol is responsible for reviewing the appropriate place
in the user instructions, warnings and important information.
Failure to follow warnings could cause injury or damage to the
reader

Important information and guidelines

Following this guidelines makes the use of the reader easier

Attention: The screenshots in this manual can be dissimilar from actual images
at the time of the device purchase. Due to continuous development of the devices
software, some of the functions may differ from these in the manual. The manufacturer
claims no responsibility for any undesirable effects (misunderstanding) caused
by changes of the software.

User manual RFID IND Modbus Mif Page 4 z 22

[B03]

2 Applications of the device

The RFID IND Modbus-Mif device is used to read RFID Mifare Classic tags.
The device is used for an integration with other systems using Modbus RTU.

3 Warranty and liability of the manufacturer

The manufacturer provides a 2-year warranty on the device. The manufacturer also
provides post-warranty service for 10 years from the date of the introducing the device
on the market. The warranty covers all defects in material and workmanship.
The manufacturer undertakes to comply with the contract of guarantee, if the following
conditions are met:

• all repairs, alterations, extensions and device calibrations are performed by the
manufacturer or authorized service,

• supply network installation meets applicable standards in this regard,

• the device is operated in accordance with the recommendations outlined in this

manual,

• the device is used as intended.

The manufacturer assumes no responsibility for consequences resulting from improper
installation, improper use of the device, not following this manual and the repairs of the
device by individuals without permission.

This device doesn’t contain serviceable parts.

User manual RFID IND Modbus Mif Page 5 z 22

[B03]

4 Safety guidelines

The reader has been designed and built using modern electronic components, according
to the latest trends in the global electronics. In particular, much emphasis was placed on
ensuring optimum safety and reliability of control.
The device has a housing with a high-quality plastic.

4.1 Power supply

The module is suitable for power supply 10-24VDC.

4.2 Storage, work conditions.

The reader is equipped with a sealed IP65 enclosure which means:

 total resistance to foreign objects
 resistance to water jet directed directly to the device
 storage and operation at temperatures from -25°C to + 60°C,

4.3 Installation and use of the reader

The reader should be used following the guidelines shown in next part of the
user manual.

4.4 Utilization of the reader

When it becomes necessary to liquidate the device (for instance retiring of the device
from service), please contact the manufacturer or its representative, who are obliged to
respond, appropriately, i.e. collecting the reader from the user. You can also ask the
companies involved in utilization and/or liquidation of electrical or computer equipment.
Under no circumstances should you place the device along with other waste material.

User manual RFID IND Modbus Mif Page 6 z 22

[B03]

5 Construction of the module

5.1 General features

The reader is equipped with an RS485 port supporting Modbus RTU protocol and a USB
port used for configuration and testing of the module.
The device has two relay outputs and two inputs.

Technical data:

Supply voltage:12-24VDC
Power supply: 40mA (12V)

Transponders:

Supported transponder standard: Mifare
Carrier frequency: 13,56 MHz
Reading distance to 10cm (depending on the type of transponder used)

Communication:

1 RS485 port – modbus RTU
1 USB port to configuration

Inputs/Outputs

2 relay outputs 1A@30VDC
2 inputs

Enclosure:

IP Rating: IP65
Dimensions:

User manual RFID IND Modbus Mif Page 7 z 22

[B03]