Wireless Remote Controller YB1FA
Contents
1 User notice ......................................................................................................1
2 Control panel of the wireless remote controller
...............................................1
3 Introduction for special function
.......................................................................4
4 Replacement of Batteries
................................................................................5
Wireless Remote Controller YB1FA
1
1 User notice
CAUTION !
①
Make sure there is no obstruction between the wireless remote controller and the signal
receiver.
②
The signal receiving distance of the wireless remote controller can be up to 10 metres.
③
Never drop or throw the wireless remote controller.
④
Never let any liquid ow into the wireless remote controller.
⑤
Never expose the wireless remote controller under the sunlight directly or where it is very
hot.
⑥
This is a general remote control, it could be used for multiple types (functions) of air
conditioners. For some models without the functions specied here, we preserve the right to
not to inform exclusively.
2 Control panel of the wireless remote controller
ONOFF
HOUR
1
4
2
5
7
9
3
8
6
10
1413
12
11
Wireless Remote Controller YB1FA
2
No. Name Function Description
1
Signal
transmitter
● Signal transmitter
2
ON/OFF
button
● Press this button, and the unit will be turned on; press it once more, and the
unit
will be turned off. When turning off the unit, the Sleep function will be
canceled, but the presetting time is still remained.
3
MODE
button
● By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected
circularly. Auto mode is default after power on. Under the Auto mode, the
setting temperature will not be displayed; Under the Heat mode, the initial
value is 28°C (82°F);Under other modes, the initial value is 25°C(77°F).
AUTO ; COOL; DRY; FAN; HEAT (only for cooling and heating unit)
4
- button
● Preset temperature can be decreased by pressing this button. Pressing
and holding this button for more than 2 seconds can make the temperature
changed quickly until release this button and then transmit this order
. The
temperature adjustment is unavailable under the Auto mode, but the order
can be sent by pre ssing this button. Centigrade setting range: 16-30;
Fahrenheit scale setting range 61-86.
+ button
● Preset temperature can be increased by pressing this button. Pressing and
holding
this button for more than 2 seconds can make the temperature
changed quickly until release the button and then
transimit this order.
The temperature adjustment is unavailable under the Auto mode, but the
order c an be sent by pressing this button. Centigrade setting
range: 16-
30; Fahrenheit scale setting range 61-86.
5
FAN button
● By pressing this button, Auto, Low, Middle, High speed can be circularly
selected. After power on, Auto fan speed is default.
●
AUTO
Low speed
Middle speed
High speed
Note: Under the DRY mode, the fan will be kept running at the low speed
and the fan speed isn't adjustable.
Wireless Remote Controller YB1FA
3
6
SWING
UP/DOWN
button
● Press this button to set up the swing angle, which circularly changes as below:
● When the guide louver starts to swing up and down, if SWING funtions
is canceled, the air guide louver will stop and remains at the current
position.
● indicates the guide louver swings up and down among those five
directions.(Simplied SWING function applicable for some Fan Coil Units:
When the wireless remote controller is energized initially with the unit
under the OFF status, it should be set by pressing the + button and the
SWING button simultaneously, with the symbol
blinking twice. Then,
after the unit is turned on, this function can be activated by pressing the
SWING button, with the displayed symbol indicating swing function is
on and without this displayed symbol indicating swing function is off.)
7
CLOCK
button
● By pressing this button, the clock is allowed to be set, with blinking,
and then press the +/- button to adjust the clock within 5 seconds. If the
+/-button is pressed down constantly for more than 2 seconds, the clock
setting will be increased or decreased 10 minutes every 0.5 seconds.
After that, another press on the CLOCK button accepts the setting. 12:00
is the default, when the wireless remote controller is energized.
8
TIMER ON
button
● When TIMER ON is activated, ON will blink while the symbol will
disappear. Within 5 seconds it is allowed to set the ON time by pressing
the +/- button. Each press will make the time increase or decrease one
minute. Besides, the time can also be set by pressing the +/- button
constantly. that is, in the early 2.5 seconds, the time will increase/
decrease quickly per single minute, and in the late 2.5, the time will
increase/decrease per ten minutes. After the desired time value is set,
press TIENE ON again to conform the setting within ve seconds. After
that, another press on TIMER ON will cancel the setting. Prior to this
setting, the clock shall be set to the actual time.
9
X-FAN
button
● Pressing this button can activate or deactivate the X-FAN function.
In Cool or Dry mode,
by
pressing this button,if " " is displayed, it
indicates the X-FAN function is activated.
By repressing this button,
if "
" disappears, it indicates the X-FAN
function is deactivated. After
energization, X-FAN OFF is defaulted. If the unit is turned off,
X-FAN can
be deactivated but can't be activated.
Wireless Remote Controller YB1FA
4
10
TEMP
button
● By pressing this button it is allowed to select displaying the indoor setting
temperature or the indoor ambient temperature.
● Indoor setting temperature is default after the indoor unit is energized
initially.
● By pressing the TEMP button, when the temperature symbol is
displayed, the indoor displayer will show the indoor setting temperature;
when
is displayed, it will show the indoor ambient temperature;
when
is invalidation, If current displays indoor ambient temperature,
if received the other remote control signal, it will display presetting
temperature, 5s later, will back to display the ambient temperature. (This
function is applicable to partial of models)
11
TIMER
OFF button
● By pessing this button it is available to go to the TIMER OFF settting
state with the same setting method as that of the TIMER ON, in which
case the OFF symbol blinks.
12
TURBO
button
● In the Cool or Heat mode, pressing this button can activate or deactivate
the TURBO function.When the TURBO fucntion is activated, its symbol
will be displayed; when the running mode or the fan speed is changed,
this function will be canceled automatically.(This function is applicable to
partial of models).
13
SLEEP
button
● By pressing this button, Sleep On and Sleep Off can be selected. After
powered on, Sleep Off is defaulted. Once the unit is turned off, the Sleep
function is canceled. When Sleep is set to On, the symbol of SLEEP
will display.Under the Fan and Auto modes, this function is not available.
14
LIGHT
button
● Press this button to select LIGHT on or off in the displayer. When the
LIGHT is set to on, the icon
will be displayed and the indicating light
in the displayer will be on. When the LIGHT is set to off, the icon will
be disappeared and the indicating light in the displayer will be off.
3 Introduction for special function
● About X-FAN function (This function is applicable to some special models)
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is
stopped to avoid mould.
This function indicates that moisture in the evaporator of the indoor unit will be blew out after
the unit is stopped so as to avoid mould.
①
With X-FAN function ON: After turning off the unit by pressing ON/OFF button indoor fan
will continue running for severval minutes at low speed. In this period, press X-FAN button to stop
indoor fan directly.
②
With X-FAN function OFF:After turning off the unit by pressing ON/OFF button, the
complete unit will be off directly.
● About TURBO function (This function is applicable to some special models)
If the TURBO function is activated, the unit will run at high fan speed to perform cooling or
Wireless Remote Controller YB1FA
5
heating quickly so that the ambient temperature will approach the preset temperature as soon as
possible.
● About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the wireless remote
controller is locked, the icon
will be displayed on it, in which case, any press will get no response
but with the mark blinking for three times. If the keyboard is unlocked, the mark will disappear.
● About SWING UP/DOWN
①
Press the Swing Up/Down button for more than 2 seconds and then the louvre will swing up
and down. After releasing the button, the louvre will stop swinging and keep the current status.
②
When the louvre starts swinging, by pressing the Swing Up/Down button 2 seconds
later, the louvre will stop swinging directly; while, by pressing the Swing Up/Down button within 2
seconds, the louver will keep swinging.
● About Change over switch between Fahrenheit and Centigrade
Under the OFF state of the unit, press MODE and - buttons simultaneously to switch between
°C and °F.
4 Replacement of batteries
1
Slightly press the place with along the arrowhead direction and push the back cover of
the wireless remote controller.
2
Take out the used batteries.
3
Insert two new AAA 1.5V dry cell batteries and pay attention to their polarity.
4
Put back the cover of the wireless remote controller.
2
3
4
1
Notes!
①
When changing the batteries, do not use the used or different-type batteries, otherwise, it
would cause some malfunction to the wireless remote controller.
②
If the wireless remote controller will not be used for a long time, please take them out, and
don’t let the battery liquid damage the wireless remote controller.
③
The operation should be within the signal receiving range.
④
It should be placed 1m away from the TV set or stereo sound sets.
⑤
If the wireless remote controller can not operate normally, please take batteries out for 30s.
If the anomaly persists, please change them.
⑥
The battery must be removed from the appliance before it is scrapped.The batteries is to be
disposed of safely.
Loading...