INVENTOR V4MVI-09WFR, V4MVO-12, V4MVI-18WFR, V4MVO-18, V4MVO-09 User Manual

...

Εγχειρίδιο Χρήσης

User’s Manual

V4MVI-09WFR/V4MVO-09 V4MVI-12WFR/V4MVO-12 V4MVI-18WFR/V4MVO-18 V4MVI-24WFR/V4MVO-24

Remote Controller

Ασύρματο Τηλεχειριστήριο

Μοντέλα:

Σας ευχαριστούμε φορητό κλιματιστικό INVENTOR.

που επιλέξατε το

Για τη σωστή χρήση της μονάδας παρακαλούμε διαβάστε προσεκτικά το παρόν εγχειρίδιο και φυλάξτε το για αναφορά στο μέλλον.

Thank you for choosing INVENTOR air conditioning system. For correct use of this unit, please read this manual carefully and keep it for future reference.

English/Ελ /Românăληνικά

CONTENTS

Model

Rated Voltage

3.0V(Dry batteries R03/LR03 2)

RG57A8/BGEF

Remote Contr oller S pecifi cation s

Environment

Signal Receiving Range

-5 C 60 C

MOD E

FAN

TEM P

SLE EP FRESH

LED

TURB O

ON/OFF

ECO

TIMER ON

TIMER OFF

NOTE:

Buttons design is based on typical model and might be slightly different from the

actual one you purchased the actual shape shall prevail.

All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding operation happened when press the relative button on the remote controller.

When there are wide differences between Remote controller Illustration and USER'S MANUAL on function description, the description of USER'S MANUAL

shall prevail.

Handling the remote controller ......................................................

Remote controller Specifications...................................................

Operation buttons .................. .........................................................

Indicators on LCD ..........................................................................

How to use the buttons .................................................................

Auto operation.................................................................................

Cooling/Heating/Fan operation......................................................

Dehumidifying operation ...............................................................

Adjusting air flow direction............................................................

Timer operation...............................................................................

SELF CLEAN

FOLLOW ME

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

Press this button to modify the air conditioner mode in a sequence of following:

MODE Button

ON/OFF Button

This button turns the air conditioner ON and OFF.

AUTO

COOL

DRY

HEAT

FAN

Used to select the fan speed in four steps: AUTO LOW MED HIGH

FAN Button

SLEEP Button

FRESH Button

NOTE: While the unit is running under SLEEP

mode, it would be cancelled if MODE, FAN SPEED or ON/OFF button is pressed.

Active/Disable sleep function. It can maintain the most comfortable temperature and save energy. This function is available on COOL, HEAT or AUTO mode only .

Active/Disable FRESH function. When the FRESH function is initiated, the Ionizer/ Plasma Dust Collector(depending on models) is energized and will help to remove pollen and impurities from the air.

For the detail, see sleep operation in USER S MANUAL.

NOTE Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance.

NOTE: You can not switch the fan speed in AUTO or DRY mode.

SELF CLEAN Button

Active/Disable Self Clean function

Operation of buttons

TIMER ON Button

TIMER OFF Button

UP Button( )

Push this button to decrease the indoor

temperature setting in 1 C increments to 17 C.

DOWN Button( )

Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays

10.0, each press will increase the autotimed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0.

Press this button to initiate the auto-off time sequence. Each press will increase the auto

-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0

Push this button to increase the indoor

temperature setting in 1 C increments to 30 C.

Operation of buttons

NOTE Temperature contol is not available in Fan mode.

TURBO Button

Active/Disable Turbo function. Turbo function enables the unit to reach the preset temperature at cooling or heating operation in the shortest time(if the indoor unit does not support this function, there is no corresponding operation happened when pressing this button.)

Used to enter the energy efficient mode. Under cooling mode, press this button, the remote controller will adjust the temperature

automatically to 24 C, fan speed of Auto to save energy(but only if the set temperature

is less than 24 C). If the set temperature is

between 24 C and 30 C, press the ECO button, the fan speed will change to Auto, the set temperature will remain unchanged.

NOTE:

Pressing the TURBO and SLEEP button, modifying the mode or adjusting the set

temperature to less than 24 C will stop ECO operation. Under ECO operation, the set temperature

should be 24 C or more. it may result in insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.

ECO Button

LED

SELF CLEAN

FOLLOW ME

LED

FOLLOW ME

TURBO

SELF CLEAN

TURBO

FOLLOW ME Button

Push this button to initiate the Follow Me feature, the remote display is actual temperature at its location. The remote control will send this signal to the air conditioner every 3 minutes interval until press the Follow Me button again. The air conditioner will cancel the Follow Me feature automatically if it does not receive the signal during any 7 minutes interval.

Operation of buttons

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

4 5

Swing Button

LED Button

Disable/Active indoor screen Display. When pushing the button, the indoor screen display is cleared, press it again to light the display.

Indicators on LCD

Fan speed indication

Mode display

Information are displayed when the remote controller is powered up.

Displayed when data transmitted.

Displayed when remote controller is ON.

Battery display(low battery detection)

Not available for this unit

Low speed

Medium speed

High speed

Auto fan speed

Note:

All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.

Displayed when TIMER ON time is set.

Displayed in Sleep Mode operation.

Indicated that the air conditioner is operating in Follow me mode

Not available for this unit

Displayed when TIMER OFF time is set.

Show set temperature or room temperature, or time under TIMER setting.

AUTO

HEAT FAN

COOL DRY

Used to stop or start horizontal louver movement or set the desired up/down air flow direction. The louver changes 6 degree in angle for each press. If hold down this button for more than 2 seconds, the louver will swing up and down automatically.

Used to stop or start vertical louver movement and set the desired left/right air flow direction.The vertical louver changes 6 degree in angle for each press. If hold down this button for more than 2 seconds, the louver will swing left and right automatically.

LED

FOLLOW ME

SELF CLEAN

TURBO

How to use the buttons

Cooling /Heating/Fan operation

Ensure the unit is plugged in and power is available.

1. Press the MODE button to select COOL, HEAT(cooling & heating models only) or FAN mode.

2. Press the UP/DOWN buttons to set the desired temperature.

3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med,or High.

4. Press the ON/OFF button to start the air conditioner.

The temperature can

OOO

be set within a range of 17 C~ 30 C in 1 C increments.

In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.

NOTE

Auto operation

Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.

1. Press the MODE button to select Auto.

2. Press the UP/DOWN button to set the

desired temperature. The temperature can

OOO

be set within a range of 17 C~ 30 C in 1 C increments.

3. Press the ON/OFFbutton to start the air

conditioner.

1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.

2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.

3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.

NOTE

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

Dehumidifying operation

Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.

1. Press the MODE button to select DRY mode.

2. Press the UP/DOWN buttons to set the desired temperature.

3. Press the ON/OFF button to start the air conditioner.

The temperature

can be set within a range of 17 C~ 30 C

in 1 C increments.

In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.

NOTE

Adjusting air flow direction

Use the SWING & button to adjust the desired airflow direction.

1. Up/Down direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing up and down automatically.

2. Left/Right direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing left and right automatically. NOTE: When the louver swing or move to a position which would affect the cooling or heating effect of the air conditioner, it would automatically change the swing/moving direction.

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

How to use the buttons

LED

FOLLOW ME

SELF CLEAN

TURBO

LED

FOLLOW ME

SELF CLEAN

TURBO

LED

FOLLOW ME

SELF CLEAN

TURBO

Timer operation

Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit.

1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation.

2. Push the TIMER ON button again to set desired Auto-on time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER ON ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" will disappear and the set temperature will re-appear on the LCD display window.

To set the Auto-on time.

To set the Auto-off time.

1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-off setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset

the Auto-off time to stop the operation.

2. Push the TIMER OFF button again to set desired Auto-off time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER OFF ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "H " will disappear and the set temperature will re-appear on the LCD display window.

MODE

FAN

TEMP

SLEEP FRESH

ON/OFF

ECO

TIMER ON

TIMER OFF

When you select the timer operation, the remote controller automatically transmits the timer signal to the indoor unit for the specified time. Therefore, keep the remote controller in a location where it can transmit the signal to the indoor unit properly. The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,

5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.

CAUTION

Example of timer setting

Start

Off

6 hours later

(Auto-on Operation)

The TIMER ON feature is useful when you want the unit to turn on automatically before you return home. The air conditioner will automatically start operating at the set time.

To start the air conditioner in 6 hours.

1. Press the TIMER ON button, the last setting of starting operation time and the signal "H" will show on the display area.

2. Press the TIMER ON button to display "6.0H " on the TIMER ON display of the remote controller.

3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON" indicator remains on and this function is activated.

TIMER ON

Example:

Set

1010

LED

FOLLOW ME

SELF CLEAN

TURBO

1111

1212

Stop

Set 10 hours later

(Auto-off Operation)

The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time.

To stop the air conditioner in 10 hours.

1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "H" will show on the display area.

2. Press the TIMER OFF button to display "10H " on the TIMER OFF display of the remote controller.

3. Wait for 3 seconds and the digital display area

will show the temperature again. The "TIMER OFF" indicator remains on and this function is activated.

TIMER OFF

Example:

Stop

2 hours later after setting

Set

To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.

1. Press the TIMER OFF button.

2. Press the TIMER OFF button again to display

2.0H on the TIMER OFF display.

3. Press the TIMER ON button.

4. Press the TIMER ON button again to display 10H on the TIMER ON display .

5. Wait for 3 seconds and the digital display area

will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated.

TIMER OFF TIMER ON (On Stop Start operation) This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning when you wake up or when you return home.

Example:

COMBINED TIMER

(Setting both ON and OFF timers simultaneously)

Start

10 hours later after setting

Example:

TIMER ON TIMER OFF (Off Start Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house.

To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.

1. Press the TIMER ON button.

2. Press the TIMER ON button again to display

2.0H on the TIMER ON display.

3. Press the TIMER OFF button.

4. Press the TIMER OFF button again to display

5.0H on the TIMER OFF display .

5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON & TIMER OFF" indicator remains on and this function is activated.

Off

Stop

Start

2 hours later after setting

5 hours later after setting

Set

1111

1212

Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep.

The remote controller can be attached to a wall or pillar by using a remote controller holder(not supplied, purchased separately). Before installing the remote controller, check that the air conditioner receives the signals properly. Install the remote controller with two screws. For installing or removing the remote controller, move it up or down in the holder.

The following cases signify exhausted batteries. Replace old batteries with new ones. Receiving beep is not emitted when a signal is transmitted. Indicator fades away.

Location of the remote controller.

Using the remote controller holder(optional)

The remote controller is powed by two dry batteries (R03/LR03X2) housed in the back rear part and protected by a cover. (1) Remove the cover in the rear part of the remote controller. (2) Remove the old batteries and insert the new batteries,placing the(+) and (-) ends correctly. (3) Install the cover back on.

NOTE: When the batteries are removed, the remote controller erases all programming. After inserting new batteries, the remote controller must be reprogrammed.

Replacing batteries

CAUTIONS

The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. Prevent any liquid from falling into the remote controller. Do not expose the remote controller to direct sunlight or heat. If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. Use curtains to prevent the sunlight from falling on the receiver. If other electrical appliances react to the remote controller, either move these appliances or consult your local dealer. Do not drop the remote controller. Handle with care. Do not place heavy objects on the remote controller, or step on it.

CAUTIONS

Do not mix old and new batteries or batteries of different types. Do not leave the batteries in the remote controller if they are not going to be used for 2 or 3 months. Do not dispose batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

Handling the remote controller

1313

1414

+ 16 hidden pages

INVENTOR V4MVI-09WFR, V4MVO-12, V4MVI-18WFR, V4MVO-18, V4MVO-09 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual