INVENTOR L4VI32-09WiFiR, L4VO32-12, L4VI32-16WiFiR, L4VO32-09, L4VO32-16 User Manual

ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA

MODELS:

L4VI32-09WiFiR / L4VΟ32-09
L4VI32-12WiFiR / L4VΟ32-12
L4VI32-16WiFiR / L4VΟ32-16
L4VI32-18WiFiR / L4VΟ32-18
L4VI32-24WiFiR / L4VΟ32-24

• USER’S MANUAL

• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

• MANUAL UTILIZATORULUI

REMOTE CONTROLLER

AIR CONDITIONING SYSTEMS

Quiet

Set fan speed

(No 、 fan speed. It’s displayed
only after turning it on.)

{

Send signal

Turbo mode

8℃ heating function

Switch temperature displaying type on
the unit’s display

Set time

T-ON /T-OFF

Child lock

Up & down swing

Left & right swing

Sleep mode

Clock

Heat mode

Fan mode

Dry mode

Cool mode

Auto mode

Operation mode

I feel

WiFi

Buttons on remote controller

Introduction for icons on display screen

6

3

7

9

10

14

15

13

12

8

11

5

4

2

1

1 ON/OFF button

2 MODE button

3 FAN button

4 TURBO button

6 button

7 button

9 I FEEL button

13

LIGHT button

14

15 TEMP button

11

CLOCK button

12

WiFi button

10

T-ON / T-OFF button

8

SLEEP button

5 ▲/ button

▲

button

1

X-FAN function

Healthy mode

Scavenging functions

2

● When selecting auto mode, air conditioner will operate automatically according
to the sensed temperature. Set temperature can’t be adjusted and will not be
displayed as well. Press "FAN" button can adjust fan speed. Press " " / " "
button can adjust fan blowing angle.

● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " " on indoor unit is ON. Press "▲" or " " button to adjust set tempe-

rature. Press "FAN" button to adjust fan speed. Press " " / " " button to adjust
fan blowing angle.

● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator " " on indoor unit is ON. Under dry mode, fan speed can’t
be adjusted. Press " " / " " button to adjust fan blowing angle.

● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF,Operation indicator is ON. Press "FAN" button
to adjust fan speed. Press" " / " " button to adjust fan blowing angle.

● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator " " on indoor unit is ON. Press "▲" or " " button to adjust set
temperature. Press "FAN" button to adjust fan speed. Press " " / " " button to
adjust fan blowing angle. (Cooling only unit won’t receive heating mode signal. If
setting heat mode with remote controller, press ON/OFF button can’t start up the
unit).

Introduction for buttons on remote controller

Note:

● After putting through the power, the air conditioner will give out a sound.
Operation indictor " " is ON (red indicator). After that, you can operate the air
conditioner by using remote controller.

●

Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once and the air conditioner will give
out a “de” sound, which means the signal has been sent to the air conditioner.

ON/OFF button

MODE button

▲

▲

1

2

Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator " " on indoor unit’s display is ON (green indicator.
The colour is different for different models), and indoor unit will give out a sound.

Press this button to select your required operation mode.

AUTO COOL FANDRY HEAT

● This is a general use remote controller, it could be used for the air conditioners

with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.

FAN button

3

Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium
( ), high( ).

Auto

Introduction for buttons on remote controller

Note:

● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).

● Set temperature range from remote controller: 16~30℃(61-86°F);
Fan speed: auto, low speed, low-medium speed,medium speed, medium-high

speed,high speed.

TURBO button

4

Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
If start this function, the unit will run at super-high fan speed to cool or heat quickly
so that the ambient temp. approachs the preset temp. as soon as possible.

▲

▲/ button

5

● Press "▲" or " " button once increase or decrease set temperature 1℃(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will

change quickly. On releasing button after setting is finished, temperature indica-

tor on indoor unit will change accordingly. (Temperature can’t be adjusted under

▲

▲

● It’s Low fan speed under Dry mode.

This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.

Having set X-FAN function on: After turning off the unit by pressing ON/OFF

button indoor fan will continue running for a few minutes. at low speed. In this
period, Hold fan speed button for 2s to stop indoor fan directly.

Having set X-FAN function off: After turning off the unit by pressing ON/OFF

button, the complete unit will be off directly.

X-FAN function Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is
displayed and the indoor fan will continue operation for a few minutes in order to dry
the indoor unit even though you have turned off the unit. After energization, X-FAN

OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.

●

●

●

● Under AUTO speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.

Note:

3

▲

▲

● When setting T-ON, T-OFF or CLOCK, press "▲" or " " button to adjust time.
(Refer to CLOCK, T-ON, T-OFF buttons) When setting T-ON, T-OFF or CLOCK

press "▲" or " " button to adjust time. (Refer to CLOCK,T-ON, T-OFF buttons)

4

Note:

● Press this button continuously more than 2s, the main unit will swing back and
forth from left to right, and then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immediately.

● Under swing left and right mode, when the status is switched from off to , if
press this button again 2s later, status will switch to off status directly; if press
this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.

Introduction for buttons on remote controller

7

Press this button can select up & down swing angle. Fan blow angle can be selected
circularly as below:

● When selecting " ", air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.

● When selecting "

、 、 、 、

", air conditioner is blowing fan at fixed

position. Horizontal louver will stop at the fixed position.

● When selecting "

、 、

", air conditioner is blowing fan at fixed angle.

Horizontal louver will send air at the fixed angle.

● Hold " " button above 2s to set your required swing angle. When reaching your
required angle, release the button.

Note:

● "

、 、

" may not be available. When air conditioner receives this signal, the

air conditioner will blow fan automatically.

● Press this button continuously more than 2s, the main unit will swing back and
forth from up to down, and then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immediately.

● Under swing up and down mode, when the status is switched from off to , if
press this button again 2s later, status will switch to off status directly; if press

no display
(horizontal louvers stops
at current position)

button

this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.

auto mode)

6

Press this button can select left & right swing angle. Fan blow angle can be selected
circularly as below:

button

no display

(stops at current position)

is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.

5

Introduction for buttons on remote controller

Note:

● Under on and off status, you can set T-OFF or T-ON simultaneously.

● Before setting T-ON or T-OFF, please adjust the clock time.

● After starting up T-ON or T-OFF, set the constant circulating valid.

After that, air conditioner will be turned on or turned off according to setting time.

ON/OFF button has no effect on setting. If you don’t need this function, please
use remote controller to cancel it.

I FEEL button

9

Press this button to start I FEEL function and " " will be displayed on the remote
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappear.

● Please put the remote controller near user when this function is set. Do not put

the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.When I FEEL function

● T-ON button
"T-ON" button can set the time for timer on. After pressing this button, " "

icon disappears and the word "ON" on remote controller blinks. Press "▲" or

" " button to adjust T-ON setting. After each pressing "▲" or " " button,

T-ON setting will increase or decrease 1min. Hold "▲" or " " button, 2s

later, the time will change quickly until reaching your required time.
Press "T-ON" to confirm it. The word "ON" will stop blinking. " " icon
resumes displaying. Cancel T-ON: Under the condition that T-ON is started up,
press "T-ON" button to cancel it.

● T-OFF button
"T-OFF" button can set the time for timer off. After pressing this button," "
icon disappears and the word "OFF" on remote controller blinks. Press "▲" or
" " button to adjust T-OFF setting. After each pressing "▲" or " " button,

T-OFF setting will increase or decrease 1min. Hold "▲" or " " button, 2s
later, the time will change quickly until reaching your required time.

Press "T-OFF" word "OFF" will stop blinking. " " icon resumes displaying.
Cancel T-OFF. Under the condition that T-OFF is started up, press "T-OFF"

button to cancel it.

▲

▲

▲

▲

T-ON / T-OFF button

8

▲

▲

13

Press this button to achieve the on and off of healthy and scavenging functions in

LCD displays " ". Press the button for the second time to start healthy and
scavenging functions simultaneously; LCD displays " " and " ". Press this
button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth t ime to start healthy function; LCD display " ".
Press this button again to repeat the operation above.

● This function is applicable to partial of models.

button

● This function is only available for some models.

Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is
turned on, the " WiFi " icon will be displayed on remote controller; Under status
of unit off, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi module
will restore to factory default setting.

6

12

Introduction for buttons on remote controller

Press this button to set clock time. " " icon on remote controller will blink. Press
"▲" or " " button within 5s to set clock time. Each pressing of "▲" or " " button,
clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later,
time will change quickly. Release this button when reaching your required time.

Note:

● Clock time adopts 24-hour mode.

● The interval between two operation can’t exceeds 5s. Otherwise, remote contro-

ller will quit setting status. Operation for T-ON/T-OFF is the same.

CLOCK button

SLEEP button

11

Under COOL, or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.After powered on, Sleep Off is defaulted. After
the unit is turned off, the Sleep function is canceled.
In this mode, the time of time can be adjusted. Under Fan、DRY and Auto modes,
this function is not available.

10

▲

▲▲

WiFi button