No part of this manual, including the product and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any
form, by any means, without prior written permission from Inventec Corp.
Inventec Corp. provides this publication “as is” without warranty of any kind. This information
could include technical inaccuracies or typographical errors. Inventec Corp. m ay make
improvements and/or changes in the product. Information and specifications contained in this
document are subject to change at any time without notice.
The information contained in this document does not affect or change the product
specifications or warranties. Inventec Corp. is not liable for any damages resulting from the use
of this product.
IMPORTANT SAFETY INFORMATION
Please read the following information carefully before you start using the Inventec Minerva
3025 to avoid any damages caused by improper usage:
z Do not open or tamper with the device cover, as it will void your warranty.
z Do not press hard on this product, as it may cause damage to the internal components.
z Do not strike, shake, or heat the device in a way whic h may cause damage to th e device.
z Do not expose the device to direct sunlight, or leave the device in a humid environment,
for extended periods of time, as this may cause damage to the device.
z Do not immerse the device in water.
z The device may interfere with the navigation and/or communication systems on aircraft.
The use of the device on aircraft is prohibited by laws in most countries.
Interference with Medical Equipment Functions
This product may cause medical equipment to malfunction. The u se of this device is forbidden
in most hospitals and medical clinics.
Nonionizing Radiation
This product should be operated in the suggested normal condition only to ensure the r adiative
performance and safety of the interference. As with ot her mobile radio transmitti ng equipment,
users are advised that for satisfactory oper ation of the equipment and for the saf ety personnel,
it is recommended that no part of the human body be allowed to come too close to the antenna
during operation of the equipment.
2
INVENTEC CORPORATION
英業達股份有限公司
User Manual
Minerva 3025
Version : 2.3
Date : 2007/10/01
FCC Regulations
zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interf erence that may cause undesired operation.
zThis device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to r adio communications. However, there is no
guarantee that interference will not occur in a particular installation If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user‘s authority to operate the equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC Body SAR Max. 1.02 W/kg
z GSM850: 0.33
z GSM1900: 0.879
z WCDMA850: 0.442
z WCDMA1900: 1.02
Chapter 4. Quitting and Uninstalling................................25
4.1 Quitting and Removing........................................................................26
Quitting Mobile Connect.....................................................................26
Removing the Wireless Device from your PC.............................26
4.2 Uninstalling Mobile Connect..............................................................26
5
INVENTEC CORPORATION
英業達股份有限公司
User Manual
Minerva 3025
Version : 2.3
Date : 2007/10/01
Chapter 1. Knowing Your Device
6
INVENTEC CORPORATION
英業達股份有限公司
1.1 Introduction
Views of the Device
User Manual
Minerva 3025
Version : 2.3
Date : 2007/10/01
It is strongly recommended to adjust the angle to 110° to reach the best signal reception
quality.
The maximum angle of the antenna is restricted to 110°.
Notification LED
The notification LED indicates the status of your device:
LED Color/Status Meaning
Blinking blue Communications in progress.
Blinking green In service.
Blinking orange Waiting for the PIN input.
Blinking multi-colored light Dialing.
Blinking red The device is out of service.
7
INVENTEC CORPORATION
英業達股份有限公司
User Manual
Blinking yellow Abnormal status including SIM card is not inserted and PIN is
locked…etc.
Minerva 3025
Version : 2.3
Date : 2007/10/01
1.2 Installing SIM Card
Inserting a SIM Card
A valid SIM (Subscriber Identity Module) card is required to use your wireless device.
zInsert the SIM card with the logo side up and push into place until it clicks down and
is held in place.
Removing a SIM Card
1. Gently press the SIM card inward and the card will eject itself.
2. Take out the SIM card from the card slot by hand.
SIM cards can only be inserted in one direction. Inserting the card in the wrong
direction by force can cause damage to the card and the card slot.
8
INVENTEC CORPORATION
英業達股份有限公司
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.