Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the
bottom of the page or below specified charts.
Parts Catalog Usage Guide
To order call toll free 1-800-333-6900, or www.invacare.com
The information contained in this document is subject to change without notice. This catalog contains
service parts for Form No. 01-058. If you have any questions regarding this catalog, please contact one
of our Customer Service Representatives.
For Customer Service Support Call:
1-800-333-6900
For Faxed In Orders Call:
1-800-678-4682 or
1-440-366-0709
For Technical Service Call:
1-800-832-4707
Literature Can Be Found at:
www.invacare.com or
1-800-828-6272
SYMBOL DEFINITION
Examples:
A,B,C etc.
NOTE:
NLA
= Special Comments
= General information pertaining to that specific page
= No Longer Available
HARDWARE MEASUREMENTS
The measurements for the hardware will be listed as follows:
Screws, Bolts
Washers
Spacers
For your convenience, we have supplied an area for you to list your Invacare Representatives.
1070412Screw, Hex Head (5/16-18 x 2-1/4")142
1108426Tube with End Seat Spacer123
1028769Locknut (5/16-18)144
1042484Screw, Hex Head (5/16-18 x 2")145
1082876Spacer (3/8 x 3/4 x 3/8")146
1108498Plug Button, Square, Black (1-1/4")147
1070398Screw, Hex Head (5/16-18 x 1-1/2")148
NOTE: All captin seats use seat frame mounting hardware part # 1109181.
Form No.
01-058
14
To order call toll free 1-800-333-6900, or www.invacare.com
Flip-Up Seat Plate Assembly
Form No.
01-058
15
To order call toll free 1-800-333-6900, or www.invacare.com
Flip-Up Seat Plate Assembly
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1107705Seat Plate Assembly, Flip-Up
14"-20" Deep
111A,D
1107175Seat Plate with Decals, Flip-Up
14"-20" Deep
112B,D
1106637Decal, Battery Removal/Installing113
1106189Flanged Bearing144
1098944Screw, Socket Head Cap w/ Patch (1/4-20 x 3/4")145
1107181Bracket, Handle Release126
1107158Bushing, Flanged (1/4 x 1/2 x 3/8")127
1106621Spring, Extension128
1107702Hook Release Assembly119
1107182Bracket, Support Release1110
7930335Screw, Phillips Pan Head (#10-32 x 1/2")25311
1107697Release Handle1112
1025731Locknut (#10-32)1313
1108560Hardware, Hook Release1114C
1035900Decal, Transportation1115
1079203Decal, Warning Pinch Point1216
1108678Plate, Threaded1117
1108677Plate, Threaded Prop1118
A - Includes Items 2 and 5-14.
B - Includes Items 3, 4, 15, and 16.
C - Includes Items 8-13.
D - 12/4/02 all seat depths now utilize only one flip-up seat plate assembly with a material depth of 13". For 20" deep models
made before 12/4/02 and measure 14", new adjustment brackets must be ordered. See page titled Flip-Up Seat Plate
Mounting Hardware.
NOTE:
16
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
Flip-Up Seat Plate Mounting Hardware
Form No.
01-058
17
To order call toll free 1-800-333-6900, or www.invacare.com
Flip-Up Seat Plate Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1108568Hardware, Seat Plate Mounting, Flip-Up
14-20" Deep
111A,B
1000208Screw, Shoulder Hex Socket (5/16" x 3/8")112
1016652Washer (5/16 x 9/16 x 1/32")113
1108986Washer, Flat (7/8 x 11/32 x 1/16")124
1108981Bracket, Prop Seat with Decals115
1070379Washer, Spring (5/8 x 1 x 1/16")126
1108676Washer, Flat (7/8 x 5/8 x 1/8") 127
1108675Bushing, Stepped (3/8" I.D.)128
1025704Washer, Flat (5/16 x 5/8 x 1/16")169
1028769Locknut (5/16-18)1410
1026158Locknut (5/16-18)1211
1107179Bracket, Adjustment
14-20" Deep - Right
1112B
1107180Bracket, Adjustment
14-20" Deep - Left
1112B
1065214Washer, Flat (3/8 x 11/16 x 1/16")1713
1069421Screw, Socket Head Shoulder (3/8 x 1")1214
1064455Screw, Socket Head Shoulder (3/8 x 1-3/4")1115
1106653Decal, Notice1116
1079203Decal, Warning Pinch Point1117
1107708Screw, Socket Head Shoulder (3/8 x 3/4")1318
A - Includes Items 2-18.
B - 12/4/02 all seat depths now utilize only one flip-up seat plate assembly with a material depth of 13". For 20" deep models
made before 12/4/02 and measure 14", a new flip-up seat plate must be ordered. See page titled Flip-Up Seat Plate
Assembly.
NOTE:
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
18
Seat Pan and Mounting Hardware
NOTE: 14-15" Wide seat depths are achieved by using CJ back cane mounting hardware.
Form No.
01-058
19
To order call toll free 1-800-333-6900, or www.invacare.com
Seat Pan and Mounting Hardware
#1 - Seat Pan
Seat Width20" Deep14-15" Deep16" Deep17" Deep18" Deep19" Deep
Screw, Hex Head (1/4-20 x 1-5/8")122
Screw, Hex Head (1/4-20 x 1-1/2") 143
Spacer (1/4 x 3/8 x 3/16")144
Locknut (1/4-20)165
A - Includes Items 2-5.
NOTE:
NOTE: 14-15" Wide seat depths are achieved by using CJ back cane mounting hardware.
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
20
Captain Seat Assembly
NOTE: Captain seats recline approximately 90-144 degrees for semi recline backs and 90-170 degrees for
full recline back models.
NOTE: Adjustable depths are 16, 17, and 18" deep for 18" wide seats and 18, 19, and 20" deep for 20"
wide seats.
NOTE: Recline release levers are standard on the right side. Left side release levers can be ordered as a
special with a new captain seat.
Form No.
01-058
21
To order call toll free 1-800-333-6900, or www.invacare.com
Captain Seat Assembly
Item NumberDescription
All Grey
Fabric
All Grey
Vinyl
All Tan
Vinyl
110696811084081106969
Backrest Extension
Semi Recline
1
110696611084091106967
Headrest Extension
Full Recline
2
110924811092421109254
Captain Seat
18" Wide
Semi Recline
with Backrest
Extension
3
110925111092451109257
Captain Seat
18" Wide
Full Recline
with Headrest
Extension
3
110924911092431109255
Captain Seat
20" Wide
Semi Recline
with Backrest
Extension
3
110925211092461109258
Captain Seat
20" Wide
Full Recline
with Headrest
Extension
3
NOTE: When converting from a semi recline to a full recline captain seat, a sensor cable part # 1092913 must be ordered as well.
Actuator mounting hardware IS NOT included with a full recline captain seat. See actuator mounting hardware.
NOTE: Captain seats recline approximately 90-144 degrees for semi recline backs and 90-170 degrees for
full recline back models.
NOTE: Adjustable depths are 16, 17, and 18" deep for 18" wide seats and 18, 19, and 20" deep for 20"
wide seats.
NOTE: Recline release levers are standard on the right side. Left side release levers can be ordered as a
special with a new captain seat.
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
22
Captain Seat and Actuator Hardware
Form No.
01-058
23
To order call toll free 1-800-333-6900, or www.invacare.com
Captain Seat and Actuator Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1070455Frame, Seat-18" Wide111
1108099Frame, Seat-20" Wide111
1108411Spacer (1/4 x 5/8 x 3/8")122
7930333Locknut (1/4-20) 2563
1030949Screw, Hex Head (1/4-20 x 1-1/2") 164
1108410Spacer (1/4 x 5/8 x 1/4")125
1026099Spacer, Coved (1/4 x 11/16 x 1/2")146
1026154Screw, Hex Head (1/4-20 x 2-1/4")127
1047449Spacer (1/4 x 3/8 x 3/16")148
1021406Screw, Hex Head (1/4-20 x 1-1/4") 129
1026900Washer (1/4 x 23/32 x 1/16")1410
1079208Hardware, Captain Seat Mounting1111A
1008525Washer, Internal Tooth Lock (#4-40)1412
7930339Screw, Phillips Pan Head (#4-40 x 3/8") 25413
To order call toll free 1-800-333-6900, or www.invacare.com
Back Canes, Spreader Bars and Attaching Hardware
NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater will be
equipped with a spreader bar standard.
Form No.
01-058
25
To order call toll free 1-800-333-6900, or www.invacare.com
Back Canes, Spreader Bars and Attaching Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart#1 Back Cane Assemblies121
See Chart#2 Spreader Bar112
1135506Package, Foam Hand Grips (9" Long)1013
1130582Package, Plug Buttons, Black (7/8")1014
1070500Kit, Back Cane Attaching Hardware, For CJ Bracket
14-15" Deep Seat
215A,E
Insert, Non-Threaded Back Cane
(For Back Heights 20" and Lower)
128
Washer (1/4 x 23/32 x 1/16")1810
Locknut (1/4-20)1811
Spacer, Coved (1/4 x 11/16 x 1/2")1812
Bracket, CJ Back Mounting - Right1113
Bracket, CJ Back Mounting - Left1113
Screw, Hex Head (1/4-20 x 1-5/8")1414
1070457Kit, Back Cane Attaching Hardware215B,C
Locknut (5/16-24)126
Screw w/ Lug (5/16-24 x 1-3/8")127
Insert, Non-Threaded Back Cane
(For Back Heights 20" and Lower)
128
Screw, Hex Head (1/4-20 x 1-5/8")149
Washer (1/4 x 23/32 x 1/16")1410
Locknut (1/4-20)1411
Spacer, Coved (1/4 x 11/16 x 1/2")1412
1070458Kit, Back Cane Attaching Hardware215B,D
Locknut (5/16-24)126
Screw w/ Lug (5/16-24 x 1-3/8")127
Insert, Non-Threaded Back Cane
(For Back Heights 21" and Higher)
128
Screw, Hex Head (1/4-20 x 1-5/8")149
Washer (1/4 x 23/32 x 1/16")1410
Locknut (1/4-20)1411
Spacer, Coved (1/4 x 11/16 x 1/2")1412
A - Includes items 8 and 10-14
B - Includes items 6-12
C - Used for 14"-20" high back canes
D - Used for 21"-22" high back canes
E - Prior to 7/9/04 new back cane attaching hardware must be ordered for 14"-15" deep seats that use CJ brackets. The
threaded insert was replaced with a non-threaded insert for 14"-20" high back canes.
NOTE:
NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater will be
equipped with a spreader bar standard.
26
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18".
NOTE: Specify upholstery colors, see page titled "Frame Finishes and Upholstery Colors"
Form No.
01-058
To order call toll free 1-800-333-6900, or www.invacare.com
29
Loading...
+ 88 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.