Page 1
Parts Catalog
Power Tilt Only (PTO-STM)
Elevating Seat w/ PTO (ESS-PTO)
Issued: Mar 13, 2013
For
2G/3G Storm Series®
Powered Wheelchairs
Yes, you can. ™
Page 2
Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the
bottom of the page or below specified charts.
Parts Catalog Usage Guide
To order call toll free 1-800-333-6900, or www.invacare.com
The information contained in this document is subject to change without notice. This catalog contains
service parts for Form No. 01-038. If you have any questions regarding this catalog, please contact one
of our Customer Service Representatives.
For Customer Service Support Call:
1-800-333-6900
For Faxed In Orders Call:
1-800-678-4682 or
1-440-366-0709
For Technical Service Call:
1-800-832-4707
Literature Can Be Found at:
www.invacare.com or
1-800-828-6272
SYMBOL DEFINITION
Examples:
A,B,C etc.
NOTE:
NLA
= Special Comments
= General information pertaining to that specific page
= No Longer Available
HARDWARE MEASUREMENTS
The measurements for the hardware will be listed as follows:
Screws, Bolts
Washers
Spacers
For your convenience, we have supplied an area for you to list your Invacare Representatives.
© 2013 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., Storm Series, the Blue Medallion Design and Tarsys are registered trademarks and
Diameter X Thread Count/Pitch X Length
Inside Diameter X Outside Diameter X Thickness
Inside Diameter X Outside Diameter X Length
Name Phone Numbers
MKIV is a trademark of Invacare Corporation.
Form No. 01-038
1
Page 3
Accessories - Headrest Support Assembly (14" - 22" W ASBA) (16" - 22" W ADJASBA Seats
w/ Back Post Only Option)
Arms - Mounting Hardware - Front/Rear Arm Socket Asbly. - ADJASBA Seat (16" - 22" W)
(After 7/4/05)
TABLE of CONTENTS
Page
Number
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038
Description
A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) ...................................................... 6
Accessories - 22NF Battery Tray Lowered Adapter Plate ........................................................ 149
Accessories - Headrest Support Assembly - ABS & Metal Curved Backs ............................... 145
147
Accessories - Lateral Support Assembly .................................................................................. 150
Accessories - Power Wheelchair Tool Kit ................................................................................ 156
Accessories - Seat/Chest Positioning Straps ........................................................................... 153
Actuator Motor & Mounting Hardware ...................................................................................... 17
Arms - Adjustable Height - (12" - 13" W x 12" - 15" D) (14" - 15" W x 12" - 22" D) ASBA Seats 70
Arms - Adjustable Height - (16" - 22" W x 16" - 22" D) Seat Frames ....................................... 75
Arms - Fixed Height - (16" - 22" W x 16" - 22" D) Seat Frames ............................................... 72
79
Arms - Mounting Hardware - Swingaway - ASBA & ADJASBA Seats ..................................... 77
Backs - ABS Curved Assembly ................................................................................................ 38
Backs - ABS Curved Mounting Hardware ................................................................................ 48
Backs - Contoura without Mounting Hardware - ADJASBA Only - Before 5/15/09 .................. 57
Backs - Curve Contoura without Mounting Hardware - ADJASBA Only (After 5/14/09) .......... 62
Backs - Metal Curved Assembly .............................................................................................. 43
Backs - Metal Curved Mounting Hardware ............................................................................... 50
Backs - Mounting Hardware - Contoura - ADJASBA Only - Before 5/15/09 ............................ 60
Backs - Mounting Hardware - Curve Contoura - ADJASBA Only (After 5/14/09) .................... 66
2
Page 4
TABLE of CONTENTS
Page
Number
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038
Description
Canes - Back & Attaching Hardware - ADJASBA Seat (16" - 22" W) (After 7/4/05) ................ 36
Canes - Back & Attaching Hardware - ASBA Seats (12" - 15" W) & (16" - 22" W Before 7/5/05) 33
Cushions - Seat - Contoura Seating - ADJASBA Only ............................................................. 54
Electronics - Elevating Seat Option - MKIV TAC Controller & 4-Way Switch ........................... 138
Electronics - MK6i ~PLEASE READ THIS SECTION~ ............................................................ 128
Electronics - MK6i Switch - Drive Lockout Mercury Free ......................................................... 136
Electronics - MKIV Quad Pulse & GB Controller Mounting Hardware ..................................... 143
Electronics - MKIV TAC Controller & 4-Way Switch without Elevating Seat ............................ 140
Electronics - Quad Link (QLA) (After 10/30/05) ........................................................................ 132
Electronics - Quad Link Assembly (Before 10/31/05) ............................................................... 129
Electronics - Tilt Recline Single Switch (TRSS) ....................................................................... 134
Elevating Seat Option - Frame - Rear & Mounting Hardware .................................................. 12
Elevating Seat Option - Seat Plate & Front Actuator Support Bracket ..................................... 68
Frame - Rear & Mounting Hardware ........................................................................................ 10
Frame - Seat Support & Mounting Hardware ........................................................................... 14
Frames - Seat ADJASBA - Seat Pan & Hdwr. (16" - 20" W x 16" - 22" D) (After 7/4/05) ......... 23
Frames - Seat ADJASBA - Seat Pan & Hdwr. (20" - 22" W x 16" - 22" D) (After 7/4/05) ......... 25
Frames - Seat ASBA & Hardware (12" - 15" W) ...................................................................... 19
Frames - Seat ASBA & Hardware (16" - 22" W) (Before 7/5/05) ............................................. 21
Front Riggings - Adjustable Angle Footplate Assemblies - AT5543 ......................................... 119
Front Riggings - Calf Pads & Attaching Hardware ................................................................... 102
3
Page 5
Front Riggings - Front Rigging Hgr. Asbly. - Pin/Sector Style - ASBA Seat (12" - 15" W) & (16" 22" W Before 7/5/05)
Front Riggings - Front Rigging Hgr. Hdwr. - Pin/Sector Style - ADJASBA Seat (16" - 22" W)
(After 7/4/05)
TABLE of CONTENTS
Page
Number
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038
Description
Front Riggings - Flip-Up Footplates - AT5043 .......................................................................... 117
Front Riggings - Footrest & Legrest Accessories ..................................................................... 125
Front Riggings - Footrest Support Assemblies ......................................................................... 91
Front Riggings - Footrest Supports - P93M .............................................................................. 110
Front Riggings - Footrest Supports - PW93 ............................................................................. 104
Front Riggings - Footrest Supports - PW93E ........................................................................... 108
Front Riggings - Footrest Supports - PW93ST ......................................................................... 106
87
89
Front Riggings - Legrest Release Handles & Ratchets ............................................................ 100
Front Riggings - Legrest Supports - AT5544 ............................................................................ 94
Front Riggings - Legrest Supports - P904A ............................................................................. 96
Front Riggings - Legrests - Articulating - PAS4A/ PAL4A ........................................................ 98
Front Riggings - One Piece Wooden Footboard & Hardware - S1263 ..................................... 122
Front Riggings - Pivot/ Slide Tube & 1650 - 1450 - 1350 Aluminum Footplates ...................... 114
Front Riggings - Pivot/ Slide Tube & 1651 Composite Footplates ........................................... 112
Front Riggings - Reference Chart ............................................................................................ 81
Packaging - Literature - Frame Finishes & Touch-Up Paint ..................................................... 7
Seat Pans & Mounting Hardware - ASBA Seat (12" - 15" W) & (16" - 22" W Before 7/5/05) ... 51
Seats - ADJASBA Mounting Hardware (16" - 22" W) (After 7/4/05) ......................................... 31
Seats - ASBA Mounting Hardware (12" - 15" W) ..................................................................... 27
4
Page 6
TABLE of CONTENTS
Page
Number
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038
Description
Seats - ASBA Mounting Hardware (16" - 22" W) (Before 7/5/05) ............................................ 29
Tilt Link & Front Support Bracket ............................................................................................. 15
5
Page 7
A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!)
Form No. 01-038
6
To order call toll free 1-800-333-6900, or www.invacare.com
Page 8
Packaging, Literature, Frame Finishes and Touch-Up Paint
Packaging and Literature
Seating System With Base
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1030364 Carton, Cover 1 1A,B
1036028 Carton, Cover 1 1A,C
1015609-NLA NLA - Bag, Poly (28" W x 44" D x 80" H) 1 1A
1030362 Carton, Tray 1 1A,B
1036027 Carton, Tray 1 1A,C
1134791 Owner's Manual, 3G Storm with MKIV Electronics 1 1A
1106647-NLA NLA - Installation Manual, Power Tilt Only KIT 1 1A
See Chart Frame Finishes and Touch-Up Paint For Front
Riggings
1 1A
See Chart Sparkle Frame Finishes 1 1A
1164348 Mailer, Return, Mercury Free 1 1A,D
A - Not Shown
B - 12" W-20" W seating system
C - 21" W-22" W seating system
D - For Massachusetts providers only
NOTE:
When adjusting or replacing parts, please refer to your Owner's Manual for assistance.
NOTE:
Frame Finishes and Touch-Up Paint For Front Riggings
Color Number Part Number Bottle Size Color
Pink Pearl.6 oz103145202P
Super Teal.6 oz103145406P
Deep Purple.6 oz103145608P
Cobalt Blue.6 oz104631917P
Anthracite.6 oz103337622P
Wet Black.6 oz103145024P
White.6 oz103144729P
Sunny YellowN/AN/A30P
Red.6 oz103145533P
Flat Black.6 oz104632734P
Silver MetallicN/AN/A60P
Electric Red.6 oz104632161P
Electric Blue.6 oz104632062P
Metallic Blue.6 oz104632464P
Teflon Black.6 oz1101320-NLA69P
Silver VeinN/AN/A71P
Evergreen with Navy.6 oz107389280P
Dark Olive with Copper.6 oz107389381P
Fruit Punch with Fucshia.6 oz107389482P
Royal Blue with Grape.6 oz107389583P
Lavender.6 oz107389684P
7
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
Page 9
Packaging, Literature, Frame Finishes and Touch-Up Paint
Frame Finishes and Touch-Up Paint For Front Riggings
Color Number Part Number Bottle Size Color
Jeweled Green.6 oz1101325101P
Denim Blue.6 oz1101327102P
Mocha Frost.6 oz1101324103P
Electric Teal.6 oz1101316104P
Midnight Blue.6 oz1101326105P
Black PrismN/AN/A115P
SunKissed OrangeN/AN/A116P
Tangerine RedN/AN/A117P
Fruit FusionN/AN/A118P
Bubblegum PinkN/AN/A119P
Grape MadnessN/AN/A120P
Lolly Pop BlueN/AN/A121P
Cosmic BlueN/AN/A122P
Celestial PurpleN/AN/A123P
Vivid VioletN/AN/A124P
Emerald GreenN/AN/A125P
Shamrock GreenN/AN/A126P
Grasshopper GreenN/AN/A127P
Form No. 01-038
8
To order call toll free 1-800-333-6900, or www.invacare.com
Page 10
Packaging, Literature, Frame Finishes and Touch-Up Paint
Sparkle Frame Finishes
Color Number Color
Twilight Sparkle72P
Gold Sparkle73P
Green Sparkle74P
Blue Sparkle75P
Red Sparkle76P
Wet Black with Twilight Sparkle88P
Form No. 01-038
9
To order call toll free 1-800-333-6900, or www.invacare.com
Page 11
Rear Frame and Mounting Hardware
Form No. 01-038
10
To order call toll free 1-800-333-6900, or www.invacare.com
Page 12
Rear Frame and Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1087632 Frame Assembly w/o Decal, Black - Rear 1 11
1071237 Plug Button, Square, Black (1") 1 42
1117326 Screw, Socket Head w/ Patch (5/16-18 x 7/8") 1 63
1068114 Shim, Seat Slide, Lower Extrusion 1 24
1069724 T-Nut (5/16-18) 1 75
1091869 Screw, Socket Flat Head w/ Patch (1/4-20 x 3/4") 1 46
1087652 Bar, Clamp, Color 1 27
1087732-NLA NLA - Guide, Linear 1 28
1106539 Hardware, Rear Frame Mounting 1 19 A
1087602-NLA NLA - Decal, Invacare Power Tilt Only 1 110
A - Less Linear Guidance (Includes items 2-7)
NOTE:
Form No. 01-038
11
To order call toll free 1-800-333-6900, or www.invacare.com
Page 13
Rear Frame and Mounting Hardware
For Elevating seat
NOTE: For 3rd Generation Storm Series Only. (ESS-PTO) Elevate w/ PTO was discontinued 10/16/06. After
10/15/06, refer to the Formula CG Powered Seating System Parts Catalog Form #06-106 for Elevate
components on a 3G Storm Series.
Form No. 01-038
12
To order call toll free 1-800-333-6900, or www.invacare.com
Page 14
Rear Frame and Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1087632 Frame Assembly w/o Decal, Black - Rear 1 11
1087652 Bar, Clamp, Color 1 22
1071237 Plug Button, Square, Black (1") 1 43
1108429 Screw, Socket Head w/ Patch (5/16-18 x 1-1/4") 1 64
1068114 Shim, Seat Slide, Lower Extrusion 1 25
1091869 Screw, Socket Flat Head w/ Patch (1/4-20 x 3/4") 1 46
1026158 Locknut (5/16-18) 1 67
1109099 Hardware, Rear Frame Mounting (Pair) 2 18 A
1087732-NLA NLA - Guide, Linear 1 29
A - Less Linear Guidance (Pair) Includes items 2-7
NOTE:
For Elevating seat
NOTE: For 3rd Generation Storm Series Only. (ESS-PTO) Elevate w/ PTO was discontinued 10/16/06. After
10/15/06, refer to the Formula CG Powered Seating System Parts Catalog Form #06-106 for Elevate
components on a 3G Storm Series.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
13
Page 15
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1087626 Support, Seat Frame 1 11 B
1121053-NLA NLA - Support, Seat Frame and Spacer Plate with
Hardware
1 11 C
1071237 Plug Button, Square, Black (1") 1 22
0055800 Washer, Nylon (7/16 x 3/4 x 3/32") 1 43
0060300 Bushing, Bronze (5/16 x 7/16 x 1-1/4") 1 24
1070412 Screw, Hex Head (5/16-18 x 2-1/4") 1 25
1026158 Locknut (5/16-18) 1 26
1025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 47
1106540 Hardware, Seat Frame Support Mounting 1 18 A
A - Includes items 2-7
B - Seat support frame revised 2/17/03 to accommodate a spacer plate for 12"-15" wide seat frames. For 12"-15" wide PTO
models made before 2/17/03 order Item 1 part number 1121053. The revised support frame is still used for all 16"-22" wide
PTO models.
C - Used for 12"-15" wide PTO models made before 2/17/03. Spacer plate and hardware included. Spacer plate can be found
on the A.S.B.A. Seat Mounting Hardware page.
NOTE:
Seat Frame Support and Mounting Hardware
Form No. 01-038
14
To order call toll free 1-800-333-6900, or www.invacare.com
Page 16
Tilt Link and Front Support Bracket
NOTE: The front actuator support bracket for a power elevating seat is located under the seat plate
assembly page.
NOTE: Tilt link mounting hardware is the same for a power tilt only and a power elevating seat.
Form No. 01-038
15
To order call toll free 1-800-333-6900, or www.invacare.com
Page 17
Tilt Link and Front Support Bracket
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1087634 Link, Tilt, Black 1 21
0139806 Screw, Hex Head (5/16-18 x 3") 1 12
1104258 Screw, Hex Head w/ Patch (5/16-18 x 1") 1 23
1023263-NLA NLA - Washer, Internal Tooth (M8) 1 34 C
1026158 Locknut (5/16-18) 1 15
1028769 Locknut (5/16-18) 1 46
1087613-NLA NLA - Bracket, Actuator Support, Front, Black (12 -
16" D)
1 17
1087622 Bracket, Actuator Support, Front, Black (17 - 19" D) 1 17
1087624-NLA NLA - Bracket, Actuator Support, Front, Black (20 -
22" D)
1 17
1107708 Screw, Shoulder Hex Socket Head (3/8 x 3/4",
5/16-18)
1 48
0139900 Washer, Nylon (1/2 x 3/4 x 3/32") 1 89
1087636-NLA NLA - Bushing, Bronze (3/8 x 1/2 x 1/2") 1 410
20105X000 Washer, Flat (1/4 x 5/8 x 1/16") 1 211
1106541-NLA NLA - Hardware, Tilt Link Mounting 1 112 A
1106542 Hardware, Front Actuator Support Bracket Mounting 1 113 B
A - Includes items 6 and 8-11
B - Includes items 2-5
C - Part #1023263 is no longer available as a service part individually. See item 13 and order part #1106542 as a
replacement.
NOTE:
NOTE: The front actuator support bracket for a power elevating seat is located under the seat plate
assembly page.
NOTE: Tilt link mounting hardware is the same for a power tilt only and a power elevating seat.
Form No. 01-038
16
To order call toll free 1-800-333-6900, or www.invacare.com
Page 18
Actuator Motor and Mounting Hardware
NOTE: Elevating seat actuator can be found in parts catalog (Form # 00-191) Storm Series 3rd Gen.
Arrow, Ranger X and Torque SP under Electronics/ Elevating Actuator, Switch Sensor and Hardware
page.
Form No. 01-038
17
To order call toll free 1-800-333-6900, or www.invacare.com
Page 19
Actuator Motor and Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
0054106 Locknut, High Profile (3/8-16) 1 11
0056000 O-Ring (1/2 x 7/8 x 3/16") 1 22
0313900-NLA NLA - Rod, End with Locknut and Roll Pin 1 13
0054606 Screw, Hex Head (3/8-16 x 2") 1 14
1028848 Pin, Roll (1/8" x 7/8") 1 15
0053900 Washer, Nylon (3/8 x 13/16 x 1/16") 1 26
1087629 Spacer, Actuator (3/8 x 1/2 x 1-1/4") 1 17
0140206 Screw, Hex Head (3/8-16 x 3-1/2") 1 18
1154068 Kit, Actuator Motor, 6-1/2" Stroke 1 19 A
Actuator Motor Assembly (6-1/2" Stroke) 1 1
Pin, Roll (1/8" x 7/8") 1 1
Instruction Sheet, PTO Actuator Installation 1 1
1106543 Hardware, Actuator Mounting 1 110 B
A - Includes item 3, Actuator Motor & Instruction Sheet
B - Includes items 1, 2, 4 and 6-8
NOTE:
NOTE: Elevating seat actuator can be found in parts catalog (Form # 00-191) Storm Series 3rd Gen.
Arrow, Ranger X and Torque SP under Electronics/ Elevating Actuator, Switch Sensor and Hardware
page.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
18
Page 20
ASBA Seat Frame and Hardware
(12"- 15" Wide)
Form No. 01-038
19
To order call toll free 1-800-333-6900, or www.invacare.com
Page 21
ASBA Seat Frame and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1037610 Screw, Hex Head (1/4-20 x 1-5/8") 1 41
1026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 42
1047449 Spacer (1/4 x 3/8 x 3/16") 1 43
1025736 Locknut (1/4-20) 1 44
47471X074 Spring, Arm Lock 1 15
1028594 Pin, Arm Lock, Black 1 15
1090768 Kit, Lock Handle w/Rivets (Pair) 2 15
See Chart #'s 6-8 ASBA Seat Frame and Hardware 1 16-8
#'s 6-8 Seat Frames
Item
Number
14"-15" W
20"-21" D
14"-15" W
22" D
Description
12"-13" W
12"-15" D
14"-15" W
12"-15" D
14"-15" W
16"-17" D
14"-15" W
18"-19" D
1070530107052810705261070473-NLA1070473-NLA1070473-NLA
Seat Frame
Right
6
See Note(s) A
107053110705291070527107047410704741070474
Seat Frame
Left
6
See Note(s) A
107053310705331070476107047610704761070476
Seat Frame
Center
7
107053610705351070534107046910704691070469
Seat Frame
Assembly
8
See Note(s) B
A - Seat frame includes item 5 arm lock assembly.
B - Includes items 1-7
NOTE:
(12"- 15" Wide)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
20
Page 22
ASBA Seat Frame and Hardware
(16"-22" Wide) (Before 7/5/05)
Form No. 01-038
21
To order call toll free 1-800-333-6900, or www.invacare.com
Page 23
ASBA Seat Frame and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Seat Frame with Hardware 1 11 A
1029501 Plug Button, Black (1") 1 22
1090768 Kit, Lock Handle w/Rivets (Pair) 2 13
47471X074 Spring, Arm Lock 1 24
1028594 Pin, Arm Lock, Black 1 25
A - Includes seat frame and items 2-5
NOTE:
#1 Seat Frame with Hardware
Seat Width 16"-17" Deep 18"-19" Deep 20"-21" Deep 22" Deep
107069910706901070681107067216" Wide
107070010706911070682107067317" Wide
107070110706921070683107067418" Wide
107070210706931070684107067519" Wide
107070310706941070685107067620" Wide
107070410706951070686107067721" Wide
107070510706961070687107067822" Wide
(16"-22" Wide) (Before 7/5/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
22
Page 24
ADJASBA Seat Frame, Seat Pan and Hardware
(16"-20" Wide) x (16"-22" Deep) (After 7/4/05)
Form No. 01-038
23
To order call toll free 1-800-333-6900, or www.invacare.com
Page 25
ADJASBA Seat Frame, Seat Pan and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1120288 Frame, Center Seat, Black 1 11 D
1122475 Crossbar, Seat Frame (16" - 20" W) 1 42
1122647 Rail, Seat Frame (16 - 20" D For Formula TRE and
16 - 19" D For ADJASBA)
1 23
1122677 Rail, Seat Frame (20 - 22" D Formula TRE) (19 -
22" D ADJASBA)
1 23
1124386 Pan, Seat with Hook and Loop Fasteners (16 - 20"
W) x (16 - 20" D For Formula TRE) & (16 - 19" D
For ADJASBA)
1 14
1124666 Pan, Seat, with Hook and Loop Fasteners (16 - 20"
W) x (20 - 22" D For Formula TRE) & (19 - 22" D
For ADJASBA)
1 14
1043082 Hook Fastener with Adhesive Back (2" W x 18" L) 1 25 A
1044580 Loop Fastener with Adhesive Back (2" W x 18" L) 1 25 A
1043084 Hook Fastener with Adhesive back (2" W x 22" L) 1 25 B
1044584 Loop Fastener with Adhesive back (2" W x 22" L) 1 25 B
1135501 Kit, Seat Frame Assembly Hardware 1 16 C
Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 87
Washer (1/4 x 1/2 x 1/16") 1 28
Spacer, Coved (1/4 x 11/16 x 1/2") 1 49
Screw, Socket Button (1/4-20 x 3/4") 1 210
Pin, Roll (3/16 x 1") 1 211
1114823 Decal, Seat Adjustment Warning 1 212
A - For 16"-19" deep seats
B - For 19"-22" deep seats
C - Includes items 7-11
D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12).
NOTE:
(16"-20" Wide) x (16"-22" Deep) (After 7/4/05)
Form No. 01-038
24
To order call toll free 1-800-333-6900, or www.invacare.com
Page 26
ADJASBA Seat Frame, Seat Pan and Hardware
(20"-22" Wide) x (16"-22" Deep) (After 7/4/05)
Note: 23" and 24" wide settings are not used with a Power Tilt Only
Form No. 01-038
25
To order call toll free 1-800-333-6900, or www.invacare.com
Page 27
ADJASBA Seat Frame, Seat Pan and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1120288 Frame, Center Seat, Black 1 11 D
1120283 Crossbar, Seat Frame (20" - 24" W) 1 42
1122647 Rail, Seat Frame (16 - 20" D For Formula TRE and
16 - 19" D For ADJASBA)
1 23
1122677 Rail, Seat Frame (20 - 22" D Formula TRE) (19 -
22" D ADJASBA)
1 23
1124388 Pan, Seat, with Hook and Loop Fasteners (20 - 24"
W) x (16 - 20" D For Formula TRE) & (16 - 19" D
For ADJASBA)
1 14
1124667 Pan, Seat with Hook and Loop Fasteners (20 - 24"
W) x (20 - 22" D For Formula TRE) & (19 - 22" D
For ADJASBA)
1 14
1043082 Hook Fastener with Adhesive Back (2" W x 18" L) 1 25 A
1044580 Loop Fastener with Adhesive Back (2" W x 18" L) 1 25 A
1043084 Hook Fastener with Adhesive back (2" W x 22" L) 1 25 B
1044584 Loop Fastener with Adhesive back (2" W x 22" L) 1 25 B
1135501 Kit, Seat Frame Assembly Hardware 1 16 C
Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 87
Washer (1/4 x 1/2 x 1/16") 1 28
Spacer, Coved (1/4 x 11/16 x 1/2") 1 49
Screw, Socket Button (1/4-20 x 3/4") 1 210
Pin, Roll (3/16 x 1") 1 211
1114823 Decal, Seat Adjustment Warning 1 212
A - For 16"-19" deep seats
B - For 19"-22" deep seats
C - Includes items 7-11
D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12).
NOTE:
(20"-22" Wide) x (16"-22" Deep) (After 7/4/05)
Note: 23" and 24" wide settings are not used with a Power Tilt Only
Form No. 01-038
26
To order call toll free 1-800-333-6900, or www.invacare.com
Page 28
ASBA Seat Mounting Hardware
(12"-15" Wide)
Form No. 01-038
27
To order call toll free 1-800-333-6900, or www.invacare.com
Page 29
ASBA Seat Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1121054 Kit, 0 Degree 12-15 Wide ASBA Seat Mounting
Hardware
1 11 A
Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 42
Washer, Flat (5/16 x 5/8 x 1/16") 1 43
Locknut (5/16-18) 1 44
1107308 Kit, 0 Degree (12-15 Wide ASBA) & (12-16 Wide
ADJASBA) Seat Mounting Hardware
1 11 B
Screw, Hex Head (5/16-18 x 2") 1 42
Washer, Flat (5/16 x 5/8 x 1/16") 1 43
Locknut (5/16-18) 1 44
Plate, Spacer 1 15
1106544 Kit, Switch Clip with Mounting Hardware 1 16 C
Bracket, Cable/Wire Mounting, Black 1 17
Screw, Phillips Pan Head Tap (#10-16 x 3/4") 1 18
Lockwasher, External Tooth (#10) 1 19
1111007 Bumper with Mounting Hardware (Pair) 2 110
1088014 Kit, 5 Degree (12-15" Wide ASBA) & (12-16" Wide
ADJASBA) Seat Mounting Hardware
1 111 D
Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 212
Screw, Hex Head (5/16-18 x 3") 1 213
Washer, Flat (5/16 x 5/8 x 1/16") 1 814
Locknut (5/16-18) 1 415
Spacer (3/8 x 7/8 x 11/16") 1 216
A - Hardware Before 2/17/03 and includes items 2-4. A Spacer Plate was added after 2/16/03. When a new Seat Frame
Support is needed, Seat Mounting Hardware dated after 2/16/03 must be ordered.
B - Hardware After 2/16/03 and includes items 2-5
C - Includes items 7-9
D - Includes items 12-16
NOTE:
(12"-15" Wide)
Form No. 01-038
28
To order call toll free 1-800-333-6900, or www.invacare.com
Page 30
ASBA Seat Mounting Hardware
(16"-22" Wide) (Before 7/5/05)
Form No. 01-038
29
To order call toll free 1-800-333-6900, or www.invacare.com
Page 31
ASBA Seat Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1107307 Kit, 0 Degree 16-22" Wide ASBA Seat Mounting
Hardware
1 11 A
Screw, Hex Head (5/16-18 x 2-3/4") 1 42
Washer, Flat (5/16 x 5/8 x 1/16") 1 43
Locknut (5/16-18) 1 44
1106544 Kit, Switch Clip with Mounting Hardware 2 15 B
Bracket, Cable/Wire Mounting, Black 1 16
Screw, Phillips Pan Head Tap (#10-16 x 3/4") 1 17
Lockwasher, External Tooth (#10) 1 18
1111007 Bumper with Mounting Hardware (Pair) 2 19
1087784 Kit, 5 Degree 16-22" Wide ASBA Seat Mounting
Hardware
1 110 C
Screw, Hex Head (5/16-18 x 2-3/4") 1 211
Screw, Hex Head (5/16-18 x 3-1/4") 1 212
Washer, Flat (5/16 x 5/8 x 1/16") 1 813
Locknut (5/16-18) 1 414
Spacer (3/8 x 7/8 x 11/16") 1 215
A - Includes items 2-4
B - Includes items 6-8
C - Includes items 11-15
NOTE:
(16"-22" Wide) (Before 7/5/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
30
Page 32
ADJASBA Seat Mounting Hardware
(16"-22" Wide) (After 7/4/05)
Form No. 01-038
31
To order call toll free 1-800-333-6900, or www.invacare.com
Page 33
ADJASBA Seat Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1134497 Kit, 0 Degree 16-22" Wide ADJASBA Seat Mounting
Hardware
1 11 A
Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 42
Washer, Flat (5/16 x 5/8 x 1/16") 1 43
Locknut (5/16-18) 1 44
1106544 Kit, Switch Clip with Mounting Hardware 1 15 B
Bracket, Cable/Wire Mounting, Black 1 16
Screw, Phillips Pan Head Tap (#10-16 x 3/4") 1 17
Lockwasher, External Tooth (#10) 1 18
1111007 Bumper with Mounting Hardware (Pair) 2 19
1134499 Kit, 5 Degree 16-22" Wide ADJASBA Seat Mounting
Hardware
1 110 C
Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 211
Screw, Allen Head (5/16-18 x 2-1/2") 1 212
Washer, Flat (5/16 x 5/8 x 1/16") 1 813
Locknut (5/16-18) 1 414
Spacer (3/8 x 7/8 x 11/16") 1 215
A - Includes items 2-4
B - Includes items 6-8
C - Includes items 11-15
NOTE:
(16"-22" Wide) (After 7/4/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
32
Page 34
Back Cane and Attaching Hardware
For ASBA Seats (12"-15" Wide) & (16"-22" Wide Before 7/5/05)
Form No. 01-038
33
To order call toll free 1-800-333-6900, or www.invacare.com
Page 35
Back Cane and Attaching Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Cane and Mounting Hardware 1 21
1135506 Package, Foam Hand Grip (9" L) 10 12
1134426 Package, Plug Button, Black (3/4") 10 13
1070499 Kit, Back Cane Attaching Hardware, For CJ Bracket
12-13" Deep Seat
2 14 A
Insert, Non-Threaded Back Cane
(For Back Heights 20" and Lower)
1 25
Washer (1/4 x 23/32 x 1/16") 1 87
Locknut (1/4-20) 1 88
Spacer, Coved (1/4 x 11/16 x 1/2") 1 89
Bracket, Back Mounting, Black - Right 1 110
Bracket, Back Mounting, Black - Left 1 110
Screw, Hex Head (1/4-20 x 1-5/8") 1 411
1070500 Kit, Back Cane Attaching Hardware, For CJ Bracket
14-15" Deep Seat
2 14 A
Insert, Non-Threaded Back Cane
(For Back Heights 20" and Lower)
1 25
Washer (1/4 x 23/32 x 1/16") 1 87
Locknut (1/4-20) 1 88
Spacer, Coved (1/4 x 11/16 x 1/2") 1 89
Bracket, Back Mounting, Black - Right 1 110
Bracket, Back Mounting, Black - Left 1 110
Screw, Hex Head (1/4-20 x 1-5/8") 1 411
1106554 Kit, Back Cane Attaching Hardware 2 14 B,C,E
Insert, Non-Threaded Back Cane
(For Back Heights 20" and Lower)
1 25
Screw, Hex Head (1/4-20 x 1-5/8") 1 46
Washer (1/4 x 23/32 x 1/16") 1 47
Locknut (1/4-20) 1 48
Spacer, Coved (1/4 x 11/16 x 1/2") 1 49
1106555 Kit, Back Cane Attaching Hardware 2 14 B,D
NLA - Insert, Non-Threaded Back Cane
(For Back Heights 21" and Higher)
1 25
Screw, Hex Head (1/4-20 x 1-5/8") 1 46
Washer (1/4 x 23/32 x 1/16") 1 47
Locknut (1/4-20) 1 48
Spacer, Coved (1/4 x 11/16 x 1/2") 1 49
A - Includes items 5-11
B - Includes items 5-9
C - Used for 12'-20" high back canes
D - Used for 21"-24" high back canes
E - Prior to 7/9/04 new back cane attaching hardware must be ordered for 12-15" deep seats that use CJ brackets. The
threaded insert was replaced with a non-threaded insert for 12-20" high back canes
NOTE:
For ASBA Seats (12"-15" Wide) & (16"-22" Wide Before 7/5/05)
34
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
Page 36
Back Cane and Attaching Hardware
#1 Back Cane Assemblies
Back Height Part Number
104525312"
104525413"
104525514"
104525615"
104855816"
104855917"
104856018"
104856119"
104856220"-24"
NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown
For ASBA Seats (12"-15" Wide) & (16"-22" Wide Before 7/5/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
35
Page 37
Back Canes and Attaching Hardware
For ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
36
To order call toll free 1-800-333-6900, or www.invacare.com
Page 38
Back Canes and Attaching Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Cane Assemblies 1 11
1135506 Package, Foam Hand Grip (9" L) 10 12
1134426 Package, Plug Button, Black (3/4") 10 13
1135999 Kit, Back Cane Mounting Hardware (Pair) 1 14 A
Screw, Hex Head (5/16-18 x 1") 1 45
Washer, Flat (21/64 x 53/64 x 7/64") 1 46
Locknut (5/16-18) 1 47
A - Includes items 5-7
NOTE:
#1 Back Cane Assemblies
Back
Height
Back Cane-
Push Handle
Straight
Right
Back Cane-
Push Handle
Straight
Left
1133786113378512"
1133788113378713"
1133790113378914"
1133792113379115"
1133794113379316"
1133796113379517"
1143335
1143334
18"
See Note(s) C See Note(s) C
1133800113379919"
1133802
1133801
20"
See Note(s) A See Note(s) D See Note(s) D
11360121136011
21"
See Note(s) B
11360141136013
22"
See Note(s) B
11360161136015
23"
See Note(s) B
11360181136017
24"
See Note(s) B
A - All 20"-24" high ABS Curved Backs ordered On-Chair will use the 20" high back cane.
B - 21"-24" high back canes are only offered On-Chair when Back Post Only option is selected.
C - Wheelchairs manufactured before 5/15/09 with a Contoura Back 25" or 29" high and wheelchairs manufactured after 5/14/09
with a Curve Contoura Back 22" high will use the 18" high Straight Back Cane w/ Push Handle.
D - Wheelchairs manufactured after 5/14/09 with a Curve Contoura Back 25" or 28" high will use the 20" high Straight Cane w/
Push Handle.
NOTE:
NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown
For ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
37
Page 39
ABS Curved Back Assembly
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
38
To order call toll free 1-800-333-6900, or www.invacare.com
Page 40
ABS Curved Back Assembly
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Pan 16"-18" 1 11
See Chart #1 Back Pan 19"-22" 1 11
See Chart #2 Back Cushion Assembly 16"-18" 1 12
See Chart #2 Back Cushion Assembly 19"-22" 1 12
See Chart #3 Back Assembly with Hardware 16"-18" 1 13
See Chart #3 Back Assembly with Hardware 19"-22" 1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 1A
A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a
new Back Pan or Back Assembly is requested.
NOTE:
#1 Back Pan - 16" Wide to 18" Wide
Overall
Back Height
Material
Back Height
16" Wide 17" Wide 18" Wide
1086023-NLA
1086022-NLA
1086021-NLA
12"16"
See Note(s) A See Note(s) A See Note(s) A
1086030-NLA
1086029-NLA
1086028-NLA
13"17"
See Note(s) A See Note(s) A See Note(s) A
1086037-NLA
1086036-NLA
1086035-NLA
14"18"
See Note(s) A See Note(s) A See Note(s) A
1086044-NLA
1086043-NLA
1086042-NLA
15"19"
See Note(s) A See Note(s) A See Note(s) A
1086051-NLA
1086050-NLA
1086049-NLA
16"20"
See Note(s) A See Note(s) A See Note(s) A
1086058-NLA
1086057-NLA
1086056-NLA
17"21"
See Note(s) A See Note(s) A See Note(s) A
1086065-NLA
1086064-NLA
1086063-NLA
18"22"
See Note(s) A See Note(s) A See Note(s) A
1086072-NLA
1086071-NLA
1086070-NLA
19"23"
See Note(s) A See Note(s) A See Note(s) A
1086079-NLA
1086078-NLA
1086077-NLA
20"24"
See Note(s) A See Note(s) A See Note(s) A
A - Part Number is No Longer Available. See Category page titled "Backs - Metal Curved Assembly" and use the item "Back
Assembly w/ Hardware" to find replacement part numbers. Match the wheelchair width by the material back height when ordering.
NOTE:
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
39
To order call toll free 1-800-333-6900, or www.invacare.com
Page 41
ABS Curved Back Assembly
#1 Back Pan - 19" Wide to 22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
1086027-NLA
1086026-NLA
1086025-NLA
1086024-NLA
12"16"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086034-NLA
1086033-NLA
1086032-NLA
1086031-NLA
13"17"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086041-NLA
1086040-NLA
1086039-NLA
1086038-NLA
14"18"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086048-NLA
1086047-NLA
1086046-NLA
1086045-NLA
15"19"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086055-NLA
1086054-NLA
1086053-NLA
1086052-NLA
16"20"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086062-NLA
1086061-NLA
1086060-NLA
1086059-NLA
17"21"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086069-NLA
1086068-NLA
1086067-NLA
1086066-NLA
18"22"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086076-NLA
1086075-NLA
1086074-NLA
1086073-NLA
19"23"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1086083-NLA
1086082-NLA
1086081-NLA
1086080-NLA
20"24"
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
A - Part Number is No Longer Available. See Category page titled "Backs - Metal Curved Assembly" and use the item "Back
Assembly w/ Hardware" to find replacement part numbers. Match the wheelchair width by the material back height when ordering.
NOTE:
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
40
To order call toll free 1-800-333-6900, or www.invacare.com
Page 42
ABS Curved Back Assembly
#2 Back Cushion Assembly - 16" Wide to 18" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 17" Wide 18" Wide
10973771097376109737512"16"
10973841097383109738213"17"
10973911097390109738914"18"
10973981097397109739615"19"
10974051097404109740316"20"
10974121097411109741017"21"
10974191097418109741718"22"
10974261097425109742419"23"
10974331097432109743120"24"
NOTE: Back cover and foam are sold as a back cushion assembly only.
#2 Back Cushion Assembly - 19" Wide to 22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
109738110973801097379109737812"16"
109738810973871097386109738513"17"
109739510973941097393109739214"18"
109740210974011097400109739915"19"
109740910974081097407109740616"20"
109741610974151097414109741317"21"
109742310974221097421109742018"22"
109743010974291097428109742719"23"
109743710974361097435109743420"24"
NOTE: Back cover and foam are sold as a back cushion assembly only.
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
41
Page 43
ABS Curved Back Assembly
#3 Back Assembly with Hardware - 16" Wide to 18" Wide
Overall
Back Height
Material
Back Height
ABS Plastic
Curved
Material Back
Height
Metal Curved
16" Wide 17" Wide 18" Wide
11069931106983110697311"12"16"
11069941106984110697412"13"17"
11069951106985110697513"14"18"
11069961106986110697614"15"19"
11069971106987110697715"16"20"
11069981106988110697816"17"21"
11069991106989110697917"18"22"
11070001106990110698018"19"23"
11070011106991110698119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
#3 Back Assembly with Hardware - 19" Wide to 22" Wide
Overall
Back Height
22" Wide
Material
Back Height
ABS Plastic
Curved
Material Back
Height
Metal Curved
19" Wide 20" Wide 21" Wide
110703311070231107013110700311"12"16"
110703411070241107014110700412"13"17"
110703511070251107015110700513"14"18"
110703611070261107016110700614"15"19"
110704211070271107017110700715"16"20"
110704311070281107018110700816"17"21"
110704411070291107019110700917"18"22"
110704511070301107020110701018"19"23"
110704611070311107021110701119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
42
Page 44
Metal Curved Back Assembly
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
43
To order call toll free 1-800-333-6900, or www.invacare.com
Page 45
Metal Curved Back Assembly
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Pan w/ Vinyl Edge Trim 16"-18" Wide 1 11
See Chart #1 Back Pan w/ Vinyl Edge Trim 19"-22" Wide 1 11
See Chart #2 Back Cushion Assembly 16"-18" Wide 1 12
See Chart #2 Back Cushion Assembly 19"-22" Wide 1 12
See Chart #3 Back Assembly with Hardware 16"-18" Wide 1 13
See Chart #3 Back Assembly with Hardware 19"-22" Wide 1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 14 A
1125724 Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 1 15
A - Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan
or Back Assembly is requested.
NOTE:
#1 Back Pan w/ Vinyl Edge Trim - 16"-18" Wide
Overall
Back Height
Material
Back Height
16" Wide 17" Wide 18" Wide
11578481157837115782611"16"
11578491157838115782712"17"
11578501157839115782813"18"
11578511157840115782914"19"
11578521157841115783015"20"
11578531157842115783116"21"
11578541157843115783217"22"
11578551157844115783318"23"
11578561157845115783419"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
44
To order call toll free 1-800-333-6900, or www.invacare.com
Page 46
Metal Curved Back Assembly
#1 Back Pan w/ Vinyl Edge Trim - 19"-22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
115789211578811157870115785911"16"
115789311578821157871115786012"17"
115789411578831157872115786113"18"
115789511578841157873115786214"19"
115789611578851157874115786315"20"
115789711578861157875115786416"21"
115789811578871157876115786517"22"
115789911578881157877115786618"23"
115790011578891157878115786719"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
#2 Back Cushion Assembly - 16"-18" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 17" Wide 18" Wide
11602291160218116020712-1/2"16"
11602301160219116020813-1/2"17"
11602311160220116020914-1/2"18"
11602321160221116021015-1/2"19"
11602331160222116021116-1/2"20"
11602341160223116021217-1/2"21"
11602351160224116021318-1/2"22"
11602361160225116021419-1/2"23"
11602371160226116021520-1/2"24"
NOTE: Back cover and foam are sold as a Back Cushion Assembly only.
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
45
To order call toll free 1-800-333-6900, or www.invacare.com
Page 47
Metal Curved Back Assembly
#2 Back Cushion Assembly - 19"-22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
109738110973801097379109737812-1/2"16"
109738810973871097386109738513-1/2"17"
109739510973941097393109739214-1/2"18"
109740210974011097400109739915-1/2"19"
109740910974081097407109740616-1/2"20"
109741610974151097414109741317-1/2"21"
109742310974221097421109742018-1/2"22"
109743010974291097428109742719-1/2"23"
109743710974361097435109743420-1/2"24"
NOTE: Back cover and foam are sold as a Back Cushion Assembly only.
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
46
Page 48
Metal Curved Back Assembly
#3 Back Assembly with Hardware - 16" -18" Wide
Overall
Back Height
Material Back
Height
ABS Plastic
Curved
Material Back
Height
Metal Curved
16" Wide 17" Wide 18" Wide
11069931106983110697311"12"16"
11069941106984110697412"13"17"
11069951106985110697513"14"18"
11069961106986110697614"15"19"
11069971106987110697715"16"20"
11069981106988110697816"17"21"
11069991106989110697917"18"22"
11070001106990110698018"19"23"
11070011106991110698119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: When ordering Metal Curved Back assemblies to replace ABS Back Pans, match the wheelchair width by the material back height to
determine the correct part number to order.
#3 Back Assembly with Hardware - 19"-22" Wide
Overall
Back Height
22" Wide
Material Back
Height ABS
Plastic Curved
Material
Back Height
Metal Curved
19" Wide 20" Wide 21" Wide
110703311070231107013110700311"12"16"
110703411070241107014110700412"13"17"
110703511070251107015110700513"14"18"
110703611070261107016110700614"15"19"
110704211070271107017110700715"16"20"
110704311070281107018110700816"17"21"
110704411070291107019110700917"18"22"
110704511070301107020110701018"19"23"
110704611070311107021110701119"20"24"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
NOTE: When ordering Metal Curved Back assemblies to replace ABS Back Pans, match the wheelchair width by the material back height to
determine the correct part number to order.
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
Form No. 01-038
47
To order call toll free 1-800-333-6900, or www.invacare.com
Page 49
ABS Curved Back Mounting Hardware
Form No. 01-038
48
To order call toll free 1-800-333-6900, or www.invacare.com
Page 50
ABS Curved Back Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1106395 Kit, ABS Curved Back Mounting Hardware 1 16 A
Screw, Socket Flat Head (1/4-20 x 1-1/4") 1 41
Hook, Back Assembly Mounting 1 42
Locknut (1/4-20) 1 43
Screw, Phillips Oval Head (#10-16 x 7/8") 1 24
NLA - Spacer, Back Pan, Black 1 45
A - Includes items 1-5
NOTE:
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
49
Page 51
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1157925 Kit, Metal Curved and Curve Contoura Back
Mounting Hardware
1 11 A
Spacer, Back Pan, Black 1 42
Hook, Back Assembly Mounting 1 43
Screw, Socket Button Head (1/4-20 x 1") 1 44
Washer (1/4 x 23/32 x 1/16") 1 85
Screw, Phillips Oval Head (#10-16 x 7/8") 1 26
Locknut (1/4-20) 1 47
A - Includes items 2-7
NOTE:
Metal Curved (16-22" Wide) Back Mounting Hardware
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
50
Page 52
Seat Pan and Mounting Hardware
For ASBA Seats (12-15" Wide) & (16-22" Wide Before 7/5/05)
Form No. 01-038
51
To order call toll free 1-800-333-6900, or www.invacare.com
Page 53
Seat Pan and Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Seat Pan 12"-18" 1 11
See Chart #1 Seat Pan 19"-22" 1 11
1070459 Kit, Seat Pan Mounting Hardware 1 16 A
Screw, Hex Head (1/4-20 x 1-5/8") 1 22
Screw, Hex Head (1/4-20 x 1-1/2") 1 43
Spacer (1/4 x 3/8 x 3/16") 1 44
Locknut (1/4-20) 1 65
A - Includes items 2-5
NOTE:
#1 Seat Pan - 12" D to 18" D
Seat Width 12-15" Deep 16" Deep 17" Deep 18" Deep
N/AN/A1070513106600912" Wide
N/AN/A1070514106601013" Wide
106603310660221066011106602214" Wide
106603410660231066012106602315" Wide
106603510660241066013106602416" Wide
106603610660251066014N/A17" Wide
106603710660261066015N/A18" Wide
106603810660271066016N/A19" Wide
106603910660281066017N/A20" Wide
106604010660291066018N/A21" Wide
106604110660301066019N/A22" Wide
NOTE: 12-15" seat depths are achieved by using CJ back cane mounting hardware.
For ASBA Seats (12-15" Wide) & (16-22" Wide Before 7/5/05)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
52
Page 54
Seat Pan and Mounting Hardware
#1 Seat Pan - 19" D to 22" D
Seat Width 19" Deep 20" Deep 21" Deep 22" Deep
N/AN/AN/AN/A12" Wide
N/AN/AN/AN/A13" Wide
106607710660661066055106604414" Wide
106607810660671066056106604515" Wide
106607910660681066057106604616" Wide
106608010660691066058106604717" Wide
106608110660701066059106604818" Wide
106608210660711066060106604919" Wide
106608310660721066061106605020" Wide
106608410660731066062106605121" Wide
106608510660741066063106605222" Wide
For ASBA Seats (12-15" Wide) & (16-22" Wide Before 7/5/05)
Form No. 01-038
53
To order call toll free 1-800-333-6900, or www.invacare.com
Page 55
Seat Cushion Assembly, Contoura
#1 Contoura Seat Cushion Assembly
NOTE: To order a Mesh Contoura Seat Cushion Assembly, please use quote # SM-100908010838 when
placing your order.
Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep
N/AN/A
1132986
1132985
1132984
1132983
1132982
16" Wide
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
N/AN/A
1132991
1132990
1132989
1132988
1132987
18" Wide
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1132998
1132997
1132996
1132995
1132994
1132993
1132992
20" Wide
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1133003
1133002
1133001
1133000
1132999
N/AN/A22" Wide
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
A - Cushion Foam is not available separately. NOTE:
ADJASBA Only
54
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
Page 56
Seat Cushion Assembly, Contoura
#2 Contoura Seat Cushion Cover Before 12/16/10
Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep
N/AN/A1132957-NLA1132956-NLA1132955-NLA1132954-NLA1132953-NLA16" Wide
N/AN/A1132962-NLA1132961-NLA1132960-NLA1132959-NLA1132958-NLA18" Wide
1132969-NLA1132968-NLA1132967-NLA1132966-NLA1132965-NLA1132964-NLA1132963-NLA20" Wide
1132974-NLA1132973-NLA1132972-NLA1132971-NLA1132970-NLAN/AN/A22" Wide
Contoura Seat Cushion Covers listed on this chart are No Longer Available. Refer to the Contoura Seat Cushion Covers dated after 12/15/10
as a direct replacement.
ADJASBA Only
Form No. 01-038
55
To order call toll free 1-800-333-6900, or www.invacare.com
Page 57
Seat Cushion Assembly, Contoura
#2 Contoura Seat Cushion Cover After 12/15/10
Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep
N/AN/A1167376116737511673741167373116737216" Wide
N/AN/A1167381116738011673791167378116737718" Wide
116738811673871167386116738511673841167383116738220" Wide
11673931167392116739111673901167389N/AN/A22" Wide
#2 Contoura Seat Cushion Cover, Mesh (CTBMSH)
Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep
N/AN/A1164212116421111642101164209116420816" Wide
N/AN/A1164217116421611642151164214116421318" Wide
116422411642231164222116422111642201164219116421820" Wide
11642291164228116422711642261164225N/AN/A22" Wide
ADJASBA Only
56
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
Page 58
Contoura Back without Mounting Hardware - ADJASBA
Only - Before 5/15/09
Form No. 01-038
57
To order call toll free 1-800-333-6900, or www.invacare.com
Page 59
Contoura Back without Mounting Hardware - ADJASBA
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Assembly without Hardware 16", 18", 20",
22" Wide
1 11
See Chart #2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22"
Wide
1 12
See Chart #3 Back Cushion Assembly 16", 18", 20", 22" Wide 1 13
1125725 Hook Fastener w/ Adhesive Back (1" W x 48" L) 1 14
1125724 Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 1 15
Only - Before 5/15/09
Form No. 01-038
58
To order call toll free 1-800-333-6900, or www.invacare.com
Page 60
Contoura Back without Mounting Hardware - ADJASBA
#1 Back Assembly without Hardware 16", 18", 20", 22" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
113283111328301132829113282820"25"
113282611247341124733113282524"29"
#2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1131408-NLA
11314071131406113140520"25"
See Note(s) A
113141111224531122454113141024"29"
A - Item is No Longer Available. Back Assembly, part # 1132831 must be purchased for replacement. NOTE:
#3 Back Cushion Assembly 16", 18", 20", 22" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
113282311328221132821113282020"25"
113281811256421125641113281724"29"
Only - Before 5/15/09
Form No. 01-038
59
To order call toll free 1-800-333-6900, or www.invacare.com
Page 61
Contoura Back Mounting Hardware- ADJASBA Only -
Before 5/15/09
Form No. 01-038
60
To order call toll free 1-800-333-6900, or www.invacare.com
Page 62
Contoura Back Mounting Hardware- ADJASBA Only -
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1140945 Kit, Contoura Back Mounting Hdwr. - Round Canes 1 11 A
Bracket, Back Mounting, Front, Black 1 42
Screw, Phillips Oval Head (#10-16 x 7/8") 1 23
Screw, Socket Button (1/4-20 x 3/4") 1 84
Washer (1/4 x 23/32 x 1/16") 1 85
Locknut (1/4-20) 1 86
Bracket, Back Mounting, Rear, Black 1 47
A - Includes items 2-7
NOTE:
Before 5/15/09
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
61
Page 63
Curve Contoura Back w/o Mounting Hardware - After
5/14/09
Form No. 01-038
62
To order call toll free 1-800-333-6900, or www.invacare.com
Page 64
Curve Contoura Back w/o Mounting Hardware - After
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Curved Contoura Back Kit 1 11 A
See Chart #1 Mesh Curved Contoura Back Kit (CTBMSH) 1 11 A
See Chart #3 Curve Contoura Back Cushion Assembly 1 13 B
See Chart #3 Mesh Curve Contoura Back Cushion Assembly
(CTBMSH)
1 13 B
1166151 Kit, Lateral Support, Contoura Back (22" H) (Pair) 1 16 C
Screw, Socket, Button (1/4-20 x 3/8") 1 4
Support, Lateral (22" H) 1 2
1163130 Kit, Lateral Support, Contoura Back (25" H) (Pair) 1 16 C
Screw, Socket, Button (1/4-20 x 3/8") 1 47
Support, Lateral (25" H) 1 28
1163131 Kit, Lateral Support, Contoura Back (28" H) (Pair) 1 16 C
Screw, Socket, Button (1/4-20 x 3/8") 1 47
Support, Lateral (28" H) 1 28
1084410 Support, Lumbar - Large 1 19
A - Includes Items 2 thru 9.
B - Includes Items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only.
C - Included Items 7 and 8.
Item
#2 is a non-saleable part. Refer to item #1 Kit when ordering.
NOTE:
#1 Curved Contoura Back Kit
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1165849
1165848
1165847
1165846
17" High22" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1161486
1161484
1161482
1161480
20" High25" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1161487
1161485
1161483
1161481
23" High28" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
A - Includes items 2-9 NOTE:
Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan
#1 Mesh Curved Contoura Back Kit (CTBMSH)
Dimensions
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1165844
1165843
1165842
1165837
17" High22" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
5/14/09
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
63
Page 65
Curve Contoura Back w/o Mounting Hardware - After
#1 Mesh Curved Contoura Back Kit (CTBMSH)
Dimensions
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1164241
1164239
1164237
1164235
20" High25" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
1164242
1164240
1164238
1164236
23" High28" High
See Note(s) A See Note(s) A See Note(s) A See Note(s) A
A - Includes items 2-9 NOTE:
Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan
5/14/09
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
64
Page 66
Curve Contoura Back w/o Mounting Hardware - After
#3 Curve Contoura Back Cushion Assembly
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1166149
1166148
1166147
1166146
17" High22" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
1163254
1163252
1163250
1163248
20" High25" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
1163255
1163253
1163251
1163249
23" High28" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. NOTE:
Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan
#3 Mesh Curve Contoura Back Cushion Assembly (CTBMSH)
Overall
Back
Height
Material
Back
Height
16" Wide 18" Wide 20" Wide 22" Wide
1166144
1166143
1166142
1166141
17" High22" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
1171648
1171646
1171644
1171642
20" High25" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
1171649
1171647
1171645
1171643
23" High28" High
See Note(s) B See Note(s) B See Note(s) B See Note(s) B
B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. NOTE:
Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan
5/14/09
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
65
Page 67
Curve Contoura Mounting Back Hardware (After 5/14/09)
Form No. 01-038
66
To order call toll free 1-800-333-6900, or www.invacare.com
Page 68
Curve Contoura Mounting Back Hardware (After 5/14/09)
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1157925 Kit, Metal Curved and Curve Contoura Back
Mounting Hardware
1 11 A
Spacer, Back Pan, Black 1 42
Hook, Back Assembly Mounting 1 43
Screw, Socket Button Head (1/4-20 x 1") 1 44
Washer (1/4 x 23/32 x 1/16") 1 85
Screw, Phillips Oval Head (#10-16 x 7/8") 1 26
Locknut (1/4-20) 1 47
A - Includes Items 2 thru 7.
NOTE:
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
67
Page 69
Seat Plate and Front Actuator Support Bracket
For Elevating Seat
NOTE: For 3rd Generation Storm Series Chairs Only. (ESS-PTO) Elevate w/ PTO was discontinued
10/16/06. After 10/15/06, refer to the Formula CG Powered Seating System Parts Catalog Form #06-106 for
Elevate components on a 3G Storm Series.
Form No. 01-038
68
To order call toll free 1-800-333-6900, or www.invacare.com
Page 70
Seat Plate and Front Actuator Support Bracket
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
7930337 Package, Screw, Hex Head w/ Patch (5/16-18 x
1-1/4")
25 81
1109615 Plate, Seat P.T.O. with Warning Decals 1 12
1108225 Spacer, Seat Plate, Black 1 23
1026158 Locknut (5/16-18) 1 84
1109081 Hardware, Front Actuator Support Bracket Mounting 1 15 A
1108230-NLA NLA - Bracket, Actuator Support, Front, Black 1 16
1079203 Decal, Warning Pinch Point 1 47
1108427-NLA NLA - Bracket Assembly, Seat Plate and Front
Actuator Support
1 18 B
A - Includes items 1, 3 and 4
B - Includes items 1-4, 6 and 7
NOTE:
For Elevating Seat
NOTE: For 3rd Generation Storm Series Chairs Only. (ESS-PTO) Elevate w/ PTO was discontinued
10/16/06. After 10/15/06, refer to the Formula CG Powered Seating System Parts Catalog Form #06-106 for
Elevate components on a 3G Storm Series.
Form No. 01-038
69
To order call toll free 1-800-333-6900, or www.invacare.com
Page 71
Arms, Adjustable Height
(12-13" W x 12-15" D) (14-15" W x 12-22" D) ASBA Seats
Form No. 01-038
70
To order call toll free 1-800-333-6900, or www.invacare.com
Page 72
Arms, Adjustable Height
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
8881015932 Pad, Arm, Vinyl, Full Length - Right (14" L x 2" W) 1 11 A
8881015933 Pad, Arm, Vinyl, Full Length - Left (14" L x 2" W) 1 11 A
8881053577 Kit, Arm Pad w/ Screws, Full Length (14" L x 2" W)
(Pair)
2 11 A
8881011811 Pad, Arm, Vinyl, Desk Length (9" L x 2" W) 1 11 A,B
8881053578 Kit, Arm Pad w/ Screws, Desk Length (9" L x 2" W)
(Pair)
2 11 A,B
1071263 Arm Tube Assembly w/ Plug Buttons, Full Length,
Black - Right/Left
1 12
1071259 Arm Tube Assembly w/ Plug Buttons, Desk Length,
Black - Right/Left
1 12
1027095 Plug Button, Black (7/8") 1 23
1055949 Package, Screw, Phillips Pan Head (#10-32 x
1-1/8") (Pair)
2 14
47471X074 Spring, Arm Lock 1 15
1028594 Pin, Arm Lock, Black 1 16
1090768 Kit, Lock Handle w/Rivets (Pair) 2 17
1065936 Plug, Pivot 1 28
1067734 Plug Button, Black (5/8") 1 29
1016298 Grip, Push Handle 1 110
1068585 Arm Base Assembly, Adjustable Height, Black -
Right
1 111
1068586 Arm Base Assembly, Adjustable Height, Black - Left 1 111
A - Specify U67 black upholstery color when ordering.
B - It is recommended that full length arm pads be used for seat depths 12"-14" allowing proper arm pad exposure to support
the forearm of the customer
NOTE:
(12-13" W x 12-15" D) (14-15" W x 12-22" D) ASBA Seats
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
71
Page 73
Arms, Fixed Height
(16"-22" Wide) x (16"-22" Deep) Seat Frames
Form No. 01-038
72
To order call toll free 1-800-333-6900, or www.invacare.com
Page 74
Arms, Fixed Height
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart Item #1 Arms Less Pad - 16"-19" Deep Seat
Frames
1 11
See Chart Item #1 Arms Less Pad - 20" and Deeper Seat
Frames
1 11 B
8881015932 Pad, Arm, Vinyl, Full Length - Right (14" L x 2" W) 1 12 A
8881015933 Pad, Arm, Vinyl, Full Length - Left (14" L x 2" W) 1 12 A
8881011811 Pad, Arm, Vinyl, Desk Length (9" L x 2" W) 1 12 A
1068564 Tube, Arm, Desk Length, Black - Right (16-19" D) 1 13
1068565-NLA NLA - Tube, Arm, Desk Length, Black - Left (16-19"
D)
1 13
1068414 Tube, Arm, Desk Length, Long, Black - Right (20"
and Deeper)
1 13 B
1068415 Tube, Arm, Desk Length, Long, Black - Left (20"
and Deeper)
1 13 B
1068490 Tube, Arm, Full Length, Black - Right (16-19"D) 1 13
1068491-NLA NLA - Tube, Arm, Full Length, Black - Left (16 -
19"D)
1 13
1068473 Tube, Arm, Full Length, Long, Black - Right (20"
and Deeper)
1 13 B
1068474 Tube, Arm, Full Length, Long, Black - Left (20" and
Deeper)
1 13 B
1032244 Grip, Foam Hand (9" L) 1 14
1025729 Screw, Phillips Pan Head Tap (#8-32 x 3/8") 1 45
1035472 Guard, Clothing, Desk Length 1 16
1044572 Guard, Clothing, Full Length (16 - 19" D) 1 16
1044005 Guard, Clothing, Full Length (20" and Deeper) 1 16 B
1035065 Cover, Clothing Guard w/ Pocket, FXDESK &
ADJFULL/ADJDESK
1 17
1044588 Cover, Clothing Guard with Pocket Fixed Height Full
Length (20" and Deeper)
1 17 B
1055949 Package, Screw, Phillips Pan Head (#10-32 x
1-1/8") (Pair)
2 18
1065936 Plug, Pivot 1 29
1067734 Plug Button, Black (5/8") 1 210
1027095 Plug Button, Black (7/8") 1 111
A - Specify U67 black upholstery color when ordering.
B - The ADJASBA seat frame for 19-22" depths must use the 16-19" deep arms only.
NOTE:
#1 Arms Less Pads
16"-19" Deep Seat Frames
Arm Style Right Left
10685671068566Desk Length
10685601068559Full Length
(16"-22" Wide) x (16"-22" Deep) Seat Frames
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
73
Page 75
Arms, Fixed Height
#1 Arms Less Pad
20" and Deeper Seat Frames
Arm Style Right Left
10685411068540Desk Length
10685291068528Full Length
(16"-22" Wide) x (16"-22" Deep) Seat Frames
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
74
Page 76
Arms, Adjustable Height
(16"-22" Wide) x (16"-22" Deep) Seat Frames
Form No. 01-038
75
To order call toll free 1-800-333-6900, or www.invacare.com
Page 77
Arms, Adjustable Height
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
8881015932 Pad, Arm, Vinyl, Full Length - Right (14" L x 2" W) 1 11 A
8881015933 Pad, Arm, Vinyl, Full Length - Left (14" L x 2" W) 1 11 A
8881011811 Pad, Arm, Vinyl, Desk Length (9" L x 2" W) 1 11 A
1071253 Arm Tube Assembly w/ Plug Buttons, Full Length,
Black - Right/Left
1 12
1070859 Arm Tube Assembly w/ Plug Buttons, Desk Length,
Black - Right/Left
1 12
1027095 Plug Button, Black (7/8") 1 23
1055949 Package, Screw, Phillips Pan Head (#10-32 x
1-1/8") (Pair)
2 14
1064130 Guard, Clothing 1 15
47471X074 Spring, Arm Lock 1 16
1028594 Pin, Arm Lock, Black 1 17
1032244 Grip, Foam Hand (9" L) 1 18
1090768 Kit, Lock Handle w/Rivets (Pair) 2 19
1028645 Rivet 1 610
1065936 Plug, Pivot 1 211
1067734 Plug Button, Black (5/8") 1 212
1068416 Arm Base Assembly, Black - Right (16-19" D) 1 113 B
1068417 Arm Base Assembly, Black - Left (16-19" D) 1 113 B
1068418 Arm Base Assembly, Black - Right (20" and Deeper) 1 113 C
1068419 Arm Base Assembly, Black - Left (20" and Deeper) 1 113 C
1035065 Cover, Clothing Guard w/ Pocket, FXDESK &
ADJFULL/ADJDESK
1 114
A - Specify U67 black upholstery color when ordering.
B - 16"-19" Deep
C - 20"-22" Deep. The ADJASBA seat frame for 19-22" depths must use the 16-19" deep arms only.
NOTE:
(16"-22" Wide) x (16"-22" Deep) Seat Frames
Form No. 01-038
76
To order call toll free 1-800-333-6900, or www.invacare.com
Page 78
Arm Mounting Swingaway Hardware
ASBA and ADJASBA Seats
Form No. 01-038
77
To order call toll free 1-800-333-6900, or www.invacare.com
Page 79
Arm Mounting Swingaway Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1068488 Kit, Swingaway Armrest Mounting Hardware 1 11 A
1019590 Screw, Socket Button Head (1/4-20 x 1-5/8") 1 12
1068025 Clevis, Pivot 1 13
1025195 Locknut (1/4-20) 1 14
1068039 Pin, Pull 1 15
A - Includes items 2-5
NOTE:
ASBA and ADJASBA Seats
Form No. 01-038
78
To order call toll free 1-800-333-6900, or www.invacare.com
Page 80
Front/Rear Arm Socket Assembly and Hardware
ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
79
To order call toll free 1-800-333-6900, or www.invacare.com
Page 81
Front/Rear Arm Socket Assembly and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1125734 Kit, Front/Rear Arm Socket Assembly Mounting
Hardware
1 11 A
Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 22
Washer, Steel (5/16 x 3/4 x 1/16") 1 43
T-Nut (5/16-18) 1 44
Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 25
1122619 Socket, Arm, Front - Right 1 16
1122620 Socket, Arm, Front - Left 1 16
1125478 Bracket, Arm Socket/Cane, Rear - Right 1 17
1125479 Bracket, Arm Socket/Cane, Rear - Left 1 17
A - Includes items 2-5
NOTE:
ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
80
To order call toll free 1-800-333-6900, or www.invacare.com
Page 82
Front Riggings Reference Chart
C=1651 Composite footplate with 9-7/8" curved pivot/ slide tube.
AT5543=Adjustable angle footplate with 9-7/8" straight pivot/ slide tube.
1450=Deluxe aluminum footplate with "L" style pivot/ slide tube.
1350=Extra large footplate with "L" style pivot/ slide tube.
Support Assemblies - AT5544, 60HD, 70NHD, PW93, PW93E, 60MFX
Side
60 MFX
Supports
AT5544
Supports
60HD
Supports
70NHD
Supports
PW93
Supports
PW93E
Supports
8881026998
8881070768
8881070776
8881053149
8881053158
8881045291
Right
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
8881026999
8881070769
8881070777
8881053148
8881053157
8881045292
Left
See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A
A - Specify frame color when ordering. NOTE:
Pivot/ Slide Tube with Footplates
Side
AT5543
14-15" W
AT5543
16-22" W
C
13-14" W
C
15-16" W
C
17-22" W
1350
17-22" W
AT5543
12-13" W
1062756106044410604421026395105787910578691057859Right
1062757106044510604431026396105788010578701057860Left
10627601062758N/A1086515105788110578711057861
Right
2" Longer
10627611062759N/A1086517105788210578721057862
Left
2" Longer
N/AN/AN/A1086516105842310584211058419
Right
4" Longer
N/AN/AN/A1086518105842410584221058420
Left
4" Longer
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
81
Page 83
Front Riggings Reference Chart
Support Assembly - AT5544
Side Part Number
8881045291
Right
See Note(s) A
8881045292
Left
See Note(s) A
A - Specify frame color when ordering. NOTE:
Pivot/ Slide Tube and Footplates
1450 16-22" W
Side Part Number
1028723Right
1028724Left
1650 = Aluminum footplate with "L" style pivot/ slide tube.
1450 = Deluxe aluminum footplate with "L" style pivot/ slide tube.
1350 = Extra large footplate with "L" style pivot/ slide tube.
AT5543 = Adjustable angle footplate with 9-7/8" straight pivot/ slide tube.
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
82
Page 84
Front Riggings Reference Chart
Support Assemblies - P904A
Side Part Number
8881058646
Right
See Note(s) A
8881058647
Left
See Note(s) A
A - Specify frame color when ordering. NOTE:
Pivot/Slide Tube and Footplates
Side
AT5543
16-22" W
1650
14-15" W
1650
16-22" W
1450
16-22" W
1350
17-22" W
AT5543
14-15" W
106275610604441058830102872310586041058612Right
106275710604451058831102872410586051058613Left
106276010627581086541N/A1086529N/A
Right
2" Longer
106276110627591086551N/A1086531N/A
Left
2" Longer
N/AN/A1086542N/A1086530N/A
Right
4" Longer
N/AN/A1086552N/A1086532N/A
Left
4" Longer
Support Assemblies - PAS4A/PAL4A
Side Part Number
1058482Right
1058483Left
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
83
Page 85
Front Riggings Reference Chart
Pivot/ Slide Tube and Footplates
Side
AT5543
16-22" W
1650
14-15" W
1650
16-22" W
1450
16-22" W
1350
17-22" W
AT5543
14-15" W
109177710917751035456102392410239071023905Right
109177810917761035457102392510239081023906Left
C = 1651 Composite footplate with 9-7/8" curved pivot/ slide tube.
AT5543 = Adjustable angle footplates with 9-7/8" straight pivot/ slide tube.
1650 = Aluminum footplate with "L" style pivot/ slide tube.
1450 = Deluxe aluminum footplate with "L" style pivot/ style tube.
1350 = Extra large footplate with "L" style pivot/ slide tube.
AT5043 = Flip up footplates without pivot/ slide tubes.
Support Assemblies - P93M
Side Part Number
8881037836
Right
See Note(s) A
8881037837
Left
See Note(s) A
A - Specify frame color when ordering. NOTE:
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
84
To order call toll free 1-800-333-6900, or www.invacare.com
Page 86
Front Riggings Reference Chart
Pivot/ Slide Tube and Footplates
Side
1650
14-15" W
1650
16-22" W
1450
16-22" W
1350
17-22" W
1031924
1028892-NLA
10579691058573Right
See Note(s) A
1031925
1028893-NLA
10579701058574Left
See Note(s) A
1086519N/AN/AN/A
Right
2" Longer
1086523N/AN/AN/A
Left
2" Longer
1086520N/AN/AN/A
Right
4" Longer
1086524N/AN/AN/A
Left
4" Longer
A - No longer available as a service part individually. NOTE:
Support Assemblies - 70MFX and 90 SWING
Side 70 MFX 90 SWING
8881062596
8881047481
Right
See Note(s) A See Note(s) A
8881062597
8881047480
Left
See Note(s) A See Note(s) A
A - Specify frame color when ordering. NOTE:
Footrest Tube and Footplates
For AT5043 and AT5543
Side
AT5043
12-16" W
AT5543
12-13" W
AT5543
14-15" W
AT5543
17-22" W
1062570106043810604361029434Right
1062571106043910604371029435Left
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
85
Page 87
Front Riggings Reference Chart
Support Assemblies - PW93ST and 70ST TAPER
Side PW93ST 70ST TAPER
8881026996
8881070784
Right
See Note(s) A See Note(s) A
8881026997
8881070785
Left
See Note(s) A See Note(s) A
A - Specify frame color when ordering. NOTE:
Pivot/ Slide Tube and Footplates
Side
C
15-17" W
C
18-19" W
C
20-22" W
105787910578691057859Right
105788010578701057860Left
105788110578711057861
Right
2" Longer
105788210578721057862
Left
2" Longer
NOTE: Calf pads with attaching hardware not included on legrest.
NOTE: Pivot/ Slide tube attaching hardware not included.
NOTE: Pivot/ Slide tube and footplates do not include heel loops. See footrest and legrest accessories.
NOTE: Pivot/ Slide tube and footplates are interchangeable with the support assemblies listed above
them.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
86
Page 88
Front Rigging Hanger Assembly
Pin/Sector Style For ASBA Seat (12-15" Wide) & (16-22" Wide Before 7/5/05)
NOTE: Front rigging hanger assemblies and seat pans share the same mounting hardware, see Seat Pan
and Mounting Hardware page.
Form No. 01-038
87
To order call toll free 1-800-333-6900, or www.invacare.com
Page 89
Front Rigging Hanger Assembly
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1068435 Front Rigging Hanger Assembly w/ Sector Block,
Black - Right (12 - 21" D)
1 11 A
1068436 Front Rigging Hanger Assembly w/ Sector Block,
Black - Left (12 - 21" D)
1 11 A
1068437 Front Rigging Hanger Assembly w/ Sector Block,
Black - Right (22" D)
1 11 A
1068438 Front Rigging Hanger Assembly w/ Sector Block,
Black - Left (22" D)
1 11 A
1054571 Kit, Sector Block - Right 1 12 B
1054572 Kit, Sector Block - Left 1 12 B
1052957 Screw, Hex Head w/ Patch (1/4-20 x 2") 1 13
1026907 Washer (1/4 x 1/2 x 1/16") 1 14
1070356 Hanger Assembly, Front Rigging, Pin Style, Black -
Right (12 - 21" D)
1 15 C
1070357 Hanger Assembly, Front Rigging, Pin Style, Black -
Left (12 - 21" D)
1 15 C
1070358 Hanger Assembly, Front Rigging, Pin Style, Black -
Right (22" D)
1 15 C
1070359 Hanger Assembly, Front Rigging, Pin Style, Black -
Left (22" D)
1 15 C
1027097 Plug Button, Black (3/4") 1 16
A - Includes item 2
B - Includes the sector block and items 3 and 4
C - Includes item 6
NOTE:
Pin/Sector Style For ASBA Seat (12-15" Wide) & (16-22" Wide Before 7/5/05)
NOTE: Front rigging hanger assemblies and seat pans share the same mounting hardware, see Seat Pan
and Mounting Hardware page.
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
88
Page 90
Front Rigging Hangers and Hardware
Pin & Sector Style For ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
89
To order call toll free 1-800-333-6900, or www.invacare.com
Page 91
Front Rigging Hangers and Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1124723 Kit, Side Rail Cap Hardware (Pair) 1 11 A
Screw, Socket Head Cap w/ Patch (1/4-20 x 1-1/2") 1 42
Spacer (1/4 x 3/8 x 29/32") 1 43
Cap, End, Side Rail, Black 1 24
Plug Button, Black (1") 1 25
Block, Threaded 1 26
1125726 Kit, Front Rigging Hanger Mounting Hardware (Pair) 1 17 B
Screw, Socket Head Cap w/ Patch (1/4-20 x 1-1/2") 1 48
Spacer (1/4 x 3/8 x 3/16") 1 49
Cap, End, Side Rail, Black 1 210
Block, Threaded 1 211
1122602 Front Rigging Hanger Assembly w/ Sector Block,
Black - Right
1 112 C
1122603 Front Rigging Hanger Assembly w/ Sector Block,
Black - Left
1 112 C
1054571 Kit, Sector Block - Right 1 113 D
1054572 Kit, Sector Block - Left 1 113 D
1136006 Front Rigging Hanger Assembly w/ Plug Button, Pin
Style, Adult, Black - Right
1 114
1136007 Front Rigging Hanger Assembly w/ Plug Button, Pin
Style, Adult, Black - Left
1 114
1134426 Package, Plug Button, Black (3/4") 10 115
A - Includes items 2-6
B - Includes items 8-11
C - Includes Front Rigging Hanger and item 13
D - Includes the Sector Block, Screw and Washer
NOTE:
Pin & Sector Style For ADJASBA Seat (16"-22" Wide) (After 7/4/05)
Form No. 01-038
90
To order call toll free 1-800-333-6900, or www.invacare.com
Page 92
Footrest Support Assemblies
(Sector Style)
Form No. 01-038
91
To order call toll free 1-800-333-6900, or www.invacare.com
Page 93
Footrest Support Assemblies
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
8881053158 Footrest Support Assembly, 60 Degree Heavy Duty,
Sector, Color - Right
1 11 A,D
8881053157 Footrest Support Assembly, 60 Degree Heavy Duty,
Sector, Color - Left
1 11 A,D
8881026998 Footrest Support Assembly, 60 Degree MFX,
Sector, Color - Right
1 11 A,E
8881026999 Footrest Support Assembly, 60 Degree MFX,
Sector, Color - Left
1 11 A,E
8881053149 Footrest Support Assembly, 70 Degree
Non-Tapered Heavy Duty, Sector, Color - Right
1 11 A,D
8881053148 Footrest Support Assembly, 70 Degree
Non-Tapered Heavy Duty, Sector, Color - Left
1 11 A,D
8881026996 Footrest Support Assembly, 70 Degree Tapered,
Sector, Color - Right
1 11 A,E
8881026997 Footrest Support Assembly, 70 Degree° Tapered,
Sector, Color - Left
1 11 A,E
8881047481 Footrest Support Assembly, 70 Degree MFX,
Sector, Color - Right
1 11 A,E
8881047480 Footrest Support Assembly, 70 Degree MFX,
Sector, Color - Left
1 11 A,E
8881062596 Footrest Support Assembly, 90 Degree, Sector,
Color - Right
1 11 A,E
8881062597 Footrest Support Assembly, 90 Degree, Sector,
Color - Left
1 11 A,E
1001762 Screw, Socket Button Head (1/4-20 x 1-3/4") 1 12
1029501 Plug Button, Black (1") 1 13
1056328 Plug Button, Black (1") 1 13
1017148 Pivot, Footrest 1 14
1025736 Locknut (1/4-20) 1 15
1025451 Screw, Slotted Hex Washer Head (#10-32 x 5/8") 1 26
1017423 Screw, Slotted Hex Washer Head w/ Patch (#10-32
x 1/2")
1 17
1025454 Housing, Latch - Right 1 18
1025455 Housing, Latch - Left 1 18
1026124 Collar, Anti-Rattle 1 19
1045267 Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 110
1026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 111 C
1020534 Insert, Threaded 1 112 F
1070759 Screw, Hex Head (1/4-20 x 1-1/2") 1 113
1044214 Nut, Hex with Nylon Cap (1/4-20) 1 114
1026703 Kit, Pivot/Slide Tube Mounting Hardware (Pair) 1 115
1057846 Kit, Pivot/Slide Tube Mounting Hardware (Pair) 1 116
8881038231 Kit, 3" Extension w/ Hardware (Pair) 1 117 A
1026987 Guard, Impact (8" L) 1 1B
(Sector Style)
Form No. 01-038
92
To order call toll free 1-800-333-6900, or www.invacare.com
Page 94
Footrest Support Assemblies
A - Specify frame color when ordering
B - Not Shown. For 70 deg. Tapered Footrest.
C - Item 16 takes 2
D - Uses Item Number 3, Plug Button 1029501
E - Uses Item Number 3, Plug Button 1056328
F - As of 8/15/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not
require ordering in Pairs.
NOTE:
(Sector Style)
Form No. 01-038
93
To order call toll free 1-800-333-6900, or www.invacare.com
Page 95
AT5544 Legrest Supports
Sector Style
12"-24" Wide Chairs
Form No. 01-038
94
To order call toll free 1-800-333-6900, or www.invacare.com
Page 96
AT5544 Legrest Supports
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1017187 Cover, Top 1 11
1028529 Screw, Phillips Pan Head (#8-32 x 3/8") 1 22
40363X000 Hex Nut (3/8"-16) 1 13
1058636 Washer, Nylon (25/64 x 7/8 x 1/32") 1 24
11919X000 NLA - Screw, Slotted Truss Head (3/8-16 x 1-1/2") 1 15
7930330 Locknut (5/16-24) 25 36
1026030 Bolt, Lug (5/16-24 x 1-3/8") 1 17
1043556 Tube, Elevating Adjustable Support, Black - Right 1 18
1043557 Tube, Elevating Adjustable Support, Black - Left 1 18
8881048851 Tube, Elevating Adjustable Support, Color - Right 1 18
8881048852 Tube, Elevating Adjustable Support, Color - Left 1 18
1032266 Bracket, Legrest Pad Mounting, Black 1 19
04528X002 Bracket, Release, Chrome 1 110
1025451 Screw, Slotted Hex Washer Head (#10-32 x 5/8") 1 211
1025454 Housing, Latch - Right 1 112
1025455 Housing, Latch - Left 1 112
7930314 Package, Screw, Slotted Hex Washer Head (#10-32
x 1/2")
25 113
42326X001 Bar, Ratchet 1 114
7930336 Nut, Acorn (5/16-24) 25 115
1017148 Pivot, Footrest 1 116
1029501 Plug Button, Black (1") 1 117
7930301 Package, Button Head Cap Screw (1/4-20 x 1-3/4") 25 118
8881045289 Bracket, Legrest Support, Color - Right 1 119 A
8881045290 Bracket, Legrest Support, Color - Left 1 119 A
1040831 Ring, Snap 1 110
7930310 Washer, Nylon (5/16 x 11/16 x 1/16") 25 121
1040060 Tip, Plastic, Black 1 122
1037485 Spring, Release 1 123
1037125 Cam, Legrest 1 124
1037126 Handle, Release 1 125
1096974 Kit, Elevating Legrest Ratchet Hardware (Pair) 2 126 C
1096943 Instruction Sheet, Ratchet Kit 1 1B
8881045291 Legrest Support Assembly, Sector, Color - Right 1 1A,B
8881045292 Legrest Support Assembly, Sector, Color - Left 1 1A,B
A - Specify frame color when ordering
B - Not shown
C - Includes items 10, 14, 15 and 20-25
NOTE:
Sector Style
12"-24" Wide Chairs
Form No. 01-038
95
To order call toll free 1-800-333-6900, or www.invacare.com
Page 97
P904A Legrest Supports
(Pin Style)
Form No. 01-038
96
To order call toll free 1-800-333-6900, or www.invacare.com
Page 98
P904A Legrest Supports
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1027095 Plug Button, Black (7/8") 1 11
11919X000 NLA - Screw, Slotted Truss Head (3/8-16 x 1-1/2") 1 12
1058636 Washer, Nylon (25/64 x 7/8 x 1/32") 1 23
40363X000 Hex Nut (3/8"-16) 1 14
7930330 Locknut (5/16-24) 25 15
1026030 Bolt, Lug (5/16-24 x 1-3/8") 1 16
8881048851 Tube, Elevating Adjustable Support, Color - Right 1 17
8881048852 Tube, Elevating Adjustable Support, Color - Left 1 17
1027097 Plug Button, Black (3/4") 1 18
8881058664 Tube, Legrest Support, Color - Right 1 19
8881058665 Tube, Legrest Support, Color - Left 1 19
1022874 Bumper 1 110
1030979 Screw, Phillips Pan Head Tap (#10-32 x 3/4") 1 111
8881058646 Legrest Support Assembly, Adult, Color - Right 1 1A,B
8881058647 Legrest Support Assembly, Adult, Color - Left 1 1A,B
A - Specify frame color when ordering.
B - Not Shown
NOTE:
(Pin Style)
Form No. 01-038
97
To order call toll free 1-800-333-6900, or www.invacare.com
Page 99
PAS4A/ PAL4A Articulating Legrests
(Pin Stlye)
Form No. 01-038
98
To order call toll free 1-800-333-6900, or www.invacare.com
Page 100
PAS4A/ PAL4A Articulating Legrests
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1058478 Tube, Legrest Support - Right 1 11
1058479-NLA NLA - Tube, Legrest Support - Left 1 11
1027097 Plug Button, Black (3/4") 1 12
40363X000 Hex Nut (3/8"-16) 3 33
1022854 Screw, Shoulder Slotted Head (1/2 x 1-1/8", 3/8-16) 1 14
1022877 Tube, Support and Drive Link, Chrome - Right 1 15
1022878 Tube, Support and Drive Link, Chrome - Left 1 15
1022848 Tube, Slide, Articulating, Chrome - Right 1 16
1022849 Tube, Slide, Articulating, Chrome - Left 1 16
1027377 Washer (#20) 1 17
7930363 Package, Locknut (5/16"-24) 25 18
11232X009 Bolt, Lug (5/16-24 x 1-3/8") 1 19
1022866 Screw, Socket Button Head (3/8-16 x 3/4") 2 210
1049527 Washer, Nylon (3/8 x 3/4 x 1/16") 2 211
1022846 Bar, Link, Chrome 1 112
1058482 Legrest Support Assembly, Articulating, Adult,
Chrome - Right
1 1A
1058483 Legrest Support Assembly, Articulating, Adult,
Chrome - Left
1 1A
A - Not Shown
NOTE:
(Pin Stlye)
Form No. 01-038
To order call toll free 1-800-333-6900, or www.invacare.com
99
Loading...