Invacare®Seating & Positioning Products
The Invacare®InTouch™Propel™ Back, the general
purpose back support so lightweight and comfortable
consumers will forget it’s there. Hardware installation is
no longer a hassle: just grab it, set it and go. The rigid shell
coupled with a soft contoured foam cushion provides
gentle support and facilitates postural symmetry. The
Propel provides a stable surface for propulsion and
completion of daily living activities. Consumers will leave
ordinary back upholstery in the past when they try the
new InTouch Propel.
HCPCS Code = E2611
© 2007 Invacare Corporation.
All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are
owned by or licensed to Invacare Corporation
unless otherwise noted.
Specifications are subject to change without notification.
The Invacare®InTouch™Stabilite™seat cushion was
developed to provide pelvic stability and leg positioning for
patients with postural asymmetry. The Stabilite comes fitted
with a ThinAir™liner, a unique comfort layer that assists in
redistributing peak pressures away from bony prominences.
The Invacare
®
InTouch™Flovair™seat cushion was
developed to provide pelvic stability, leg positioning and
pressure management for patients with postural asymmetry
and skin integrity concerns. It incorporates a fluid overlay
used in tandem with the ThinAir™liner. This allows for pelvic
immersion while minimizing overall product weight. The
insert’s unique channeling method limits the amount of fluid
migration, thus decreasing the chances for “bottoming out.”
The Flovair is a great choice for neuromuscular, TBI or SCI
clients without significant obliquity.
HCPCS Code = E2607, E2608 (Gentle Contour)
HCPCS Code =E2607, E2608 (Gentle Contour) E2605 (Max Contour)
Invacare
Invacare®Seating & Positioning Products
Invacare®Rehab Seating & Positioning Products
With the number of new seating and positioning products available today, it’s only
natural to choose the products that you know best. Invacare seating and positioning
products offer a clinical benefit while making life more comfortable for the consumer .
This catalog is your source for Invacare seating and positioning products.
Whether it’ s the comfort and style of an Absolute™cushion, or the revolutionary
InTouch™Flovair™and Stabilite™, Invacare seating and positioning products
provide optimal solutions, for any individual’ s seating needs. Not only do Invacare
products raise the benchmark in functionality and comfort for the consumer , but they
also ensure that all providers can have confidence in our quality products.
®
Seating & Positioning Products
For your convenience, we have included a perforated Off-the-Shelf Product Guide that
can be easily torn-off and used for reference. Post it on the wall, place it in a binder or
keep it with you as you travel to see clients. However you decide to use it, we hope it
helps in choosing Invacare products.
Invacare is committed to providing you with products that exceed your expectations.
As the landscape of seating changes,Invacare’ s dedication to innovation, quality and,
most of all, your comfort, will stay the same.
TEAR ALONG THIS EDGE
5
11
Invacare®Seating & Positioning Products
Invacare
®
Seating and Positioning Products
Infinity Cushions (page 6)
Lo Contour Gentle Contour Max Contour
Seat width 13" – 22" 13" – 22" 13" – 22"
Seat depth 15" – 20" 15" – 20" 15" – 20"
Product weight 4 lb. 4 lb. 4 lb.
Weight capacity 250 lb. 250 lb. 250 lb.
Limited warranty 2 years 2 years 2-years
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44036-2125
(800) 333-6900
Canada
Invacare Canada Inc.
570 Matheson Blvd E
Unit 8
Mississauga Ontario
L4Z 4G4 Canada
Invacare®Seating & Positioning Products
Table of Contents
Invacare®Cushions........................................1-7
Absolute™........................................................1
Comfort-Mate Extra ......................................2
Stabilite™........................................................3
Flovair™............................................................4
TargIT™............................................................5
Infinity®Cushions ..............................................6
Invacare®Backs ............................................7-8
Propel™............................................................7
Personal Back™10 ........................................8
Personal Back 10 Plus..................................8
Accessories ..................................................9-10
Specifications ..................................................11
TargIT™ (page 5)
Seat width 15" – 24"
Seat depth 15" – 22"
Product weight 3 lb.
Weight capacity
15" – 20" W 300 lb.
21" – 24" W 500 lb.
Limited warranty 2 years
* All weights/measurements are approximate
Propel™Back (page 7)
Width range 16"– 21" (1" increments)
Product height 16.5"
Depth adjust 1.75"
Angle adjust +/-27°
Product weight 4 lb.
Weight capacity 300 lb.
Limited warranty 2 years
*
All weight/measurements are approximate
Specifications
*
Personal Backs (page 8)
Personal Back™10 Personal Back™10 Plus
Back height
13" – 14" widths 14", 16" 14", 16"
15" – 26" widths 16", 19" 16", 19"
Back width 13" – 20", 22", 24", 26" 13" – 20", 22", 24", 26"
Product weight
13" – 20" widths 5 lb. 6 lb.
22" – 26" widths 10 lb. 11 lb.
Weight capacity
13" – 20" widths 250 lb. 250 lb.
22" – 26" widths 500 lb. 500 lb.
Limited warranty 2 years 2 years
© 2007 Invacare Corporation.
All rights reserved. Trademarks are
identified by the symbols ™ and ®.
All trademarks are owned by or licensed
to Invacare Corporation unless otherwise
noted.
Specifications are subject to change
without notification.
© 2007 Invacare Corporation.
Form No. 06-043 Rev. 04/07
Stabilite/Flovair Cushions (page 3 and page 4)
Seat width 15" – 24" Gentle
15" – 20" Max
Seat depth 15" – 22" Gentle
15" – 20" Max
Product weight 3.05 lb. Stabilite
4.20 lb. Flovair
Weight capacity 15" –20" 250 lb.
21" –24" 350 lb.
Limited warranty 2 years
Invacare®Cushions
Invacare
®
Cushions
1
Invacare®Cushions
Invacare
®
Cushions
Invacare®Absolute™Series: Simple seating solutions for comfort, fit and function.
InTouch®Absolute™Cushion (formerly Essential
™
Cushion)
Model no. EC
• Molded polyurethane foam provides comfort and durability
• Breathable, water repellant cover
• Non-slip bottom with hook and loop fasteners keeps cushion securely in place
• Six sizes from 16" x 16" to 20" x 18"
• Shaped cushion bottom for use on taught sling upholstery
Comfort Thickness
A. Height at adductor 3.25"
B. Height at abductor 2.25"
C. Height at rear 2"
InTouch®Comfort-Mate Extra Cushion
Model no. CMEX
Comfort Thickness
A. Height at adductor 2.625"
B. Height at abductor 3.0"
C. Height at rear 1.75"
D. Height at leg trough 2.25"
Cushion weight approximately 2.3 lb.
(18" x 16" cushion w/cover)
• Low profile, lightweight cushion designed for long-term sitting comfort
• Comfortable, molded dual-firmness polyurethane foam promotes good postural position
• Moisture-resistant coating seals and protects foam from moisture; easily wipes clean
• Breathable, water repellant cover
• Beveled sides coupled with a firm base for stability and a soft outer layer for comfort
• A great fit for the Infinity®Drop Base to get your desired seat-to-floor
For clients with mild to moderate seating needs, the Invacare®Absolute™Series cushions offers a wide range of simple, but highly
functional solutions. The Absolute cushion is designed to provide comfort at an affordable price.
2
The Invacare Comfort-Mate Extra cushion goes one step further with a comfortable, molded design and a durable moisture-resistant coating.
HCPCS Code = E2601 HCPCS Code = E2603, E2604
• Comfort
• Adults and geriatrics, primarily comfort, able to do own weight shift for pressure relief
• Good rental wheelchair cushion
Application Guide
• Comfort stability and gentle positioning
• Adolescents through geriatrics with long-term comfort needs, who are able to do own weight shift
for pressure relief
• Good long-term care facility wheelchair cushion
Application Guide
B
C
A
3
Invacare®Cushions
Invacare
®
Cushions
4
Invacare®Cushions
Invacare
®
Cushions
Features
Positioning foam base
+
ThinAir™liner
Gentle/Max contour
The Stabilite™seat cushion was developed to provide pelvic stability and leg
positioning for patients with postural asymmetry. The Stabilite comes fitted with
a patent-pending ThinAir™liner, a unique comfort layer that assists in redistributing peak pressures away from bony prominences. The Stabilite is a great choice
for geriatric or CVA clients.
InTouch™Stabilite
™
“Stable + Light”
Functional Benefits
Supports the pelvis and thighs; helps to prevent adduction and
internal rotation
Helps reduce shear
Contour choices based on involvement level
Gentle Max
Contour Contour
A. Height at adductor 3.5" 4.38"
B. Height at abductor 3.5" 4.38"
C. Height at leg trough 2.87" 2.88"
Contour Thickness
InTouch™Flovair™/Stabilite™ Gentle Contour InTouch™Flovair™/Stabilite™ Max Contour
Features
Positioning foam base
Fluid + ThinAir™liner
Gentle/Max contour
The Flovair™seat cushion was developed to provide pelvic stability, leg positioning and pressure management for patients with postural asymmetry and skin
integrity concerns. It incorporates a fluid overlay used in tandem with the
ThinAir™liner. This allows for pelvic immersion while minimizing overall product
weight. The insert’s unique channeling method limits the amount of fluid migration, thus decreasing the chances for “bottoming out.” The Flovair is a great
choice for neuromuscular, TBI or SCI clients without significant obliquity.
Flovair
InTouch™Flovair
™
“Fluid over Air”
+
Functional Benefits
Supports the pelvis and thighs; helps to prevent adduction and
internal rotation
Effectively redistributes pressure without weight penalty.
Additional shear reduction as two layers work in
harmony.
Contour choices based on involvement level
The larger the surface area, the lower the
pressure. Our engineers put purpose behind the
contouring of the InTouch base to mimic the
shape of the seated human body. Leg troughs
are slightly abducted. Soft foam envelops the
IT’s, coccyx and sacrum. Firmer foam supports
the trochanters while preventing hammocking.
Smooth, refined transitions are sculpted to
replace steep ridges or uncomfortably placed
abductors.
If the base isn’t right, then nothing else matters!
Features
Medial thigh support
Raised adductors
Sacral relief
Pre-ischial elevation
Lateral pelvic support
Low profile
Functional Benefits
Gentle control of mild adduction tendency
Positioning guidance to maintain proper alignment of lower
extremities
Provides additional comfort and support for those sitting in anterior
to posterior pelvic tilt
Limits forward migration of pelvis and sliding out of position
Intended to maintain pelvis in a centered position on the seat and
provide lateral stability
Reduces seat-to-floor height for foot propulsion and lateral transfers
Positioning Support Base
Stabilite
Maximize surface area
HCPCS Code = E2607, E2608
(Gentle Contour)
E2605
(Max Contour)
HCPCS Code = E2607, E2608
Model no. ITFG, ITFM
Model no. ITSG, ITSM
Stabilite
Stabilite
Flovair
Flovair
6
Invacare
®
Cushions
Invacare®Cushions
Invacare®Single Density Cushion
Model no. SD
• Contoured deformation cut foam provides com-
fort and stability
• Available in over 100 custom sizes
• Water repellent cover with non-slip bottom
Cushion Thickness
A. Height at rear (adductor) 2"
B. Height at rear (center) 1.5"
C. Height at front 2.5"
Cushion weight approximately 2 lb.
ViscoFoam
Model no. ILCVF, IGCVF, IMCVF
ViscoFoam is an excellent choice for clients who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a lightweight cushion
FloGel
®
Model no. ILCFG, IGCFG, IMCFG
FloGel®is an excellent choice for clients who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a good dynamic shear reduction
AirFlo
™
Model no. ILCAIR, IGCAIR, IMCAIR
AirFlo™is an excellent choice for clients who:
• Have a history of or are considered to be at
very high risk of skin breakdown
• Require an air flotation insert for immersion
of bony prominences
• Require a postural support base for stability
LoContour
LoContour is an excellent choice for clients who:
• Have good postural control
• Have low to normal muscle tone
• Laterally transfer
• Foot propel
Gentle Contour
Gentle Contour is an excellent choice for clients
who:
• Have moderate postural instability
• Require gentle control of tone
• Need moderate control of
abduction/adduction tendency
Max Contour
Max Contour is an excellent choice for clients
who:
• Require high level of postural control
• Need maximum control of tone
• Require optimal pressure reduction
and redistribution
Invacare®Infinity®Cushions
Application
• Comfort
• Adult and geriatric, able to do own weight shift for pressure relief
• Good rental wheelchair cushion
5
Invacare®Cushions
Invacare
®
Cushions
Positioning Support Base
The support base of the TargIT cushion is constructed with molded
polyurethane foam contoured to promote comfort, enhance positioning
and prevent bottoming out.
Features: Functional Benefits:
• Medial Thigh Support (Abductor) Gentle control of mild adduction tendency
• Raised Adductors Positioning guidance to maintain proper
alignment of lower extremities
• Mild Hip Guides Adductors are extended posteriorly to keep
user centered on cushion
• Pre-contoured sacral area Provides additional comfort and support
for those sitting in anterior to posterior
pelvic tilt
• Pre-ischial shelf w/ 15˚ drafted Limits forward migration of pelvis and
edge sliding out of position
• Low profile (Gentle) Reduces seat-to-floor height for foot
propulsion and lateral transfers
Ideal for clients who require a mild to
moderate level of postural support
• Deep IT relief well (Max) Provides maximum pelvic immersion and
control
Ideal for clients who require a moderate to
high level of postural support
with
Technology
Invacare®InTouch™TargIT™ is the industry standard for consumers who require moderate skin protection and positioning. The
large, anatomically-shaped pelvic surface of the InTouch cushion eliminates the guesswork of placing a consumer in contact with
pressure-relieving material. The construction of the InTouch TargIT incorporates an exclusive Blend
2
™
foam molding technology
that fuses the poly urethane base foam with visco-elastic pressure-relieving foam to eliminate transitional edges, providing worryfree fit and comfort.
Features
Model no. ITTG, ITTM
• InTouch™Zone technology
• Blend
2
™
foam molding technology
• Sacral relief
• Gentle/Contour
• Bariatric sizes available
InTouch™TargIT™Max and Gentle Contour Cushion
Gentle Max
Contour Contour
A. Height at adductor 3.625" 4.35"
B. Height at abductor 3.625" 4.35"
C. Height at leg trough 2.50" 2.85"
Contour Thickness
InTouch™TargIT™Gentle Contour
InTouch
™
TargIT
™
Max Contour
HCPCS Code = E2607, E2608
B
A
C
8
Invacare
®
Backs
Deep lateral contour of the Personal Back10 Plus
provides increased midline support without
interfering with upper extremity
range of motion.
The Personal Back™10
and Personal Back™10 Plus
combine simplicity of design
with effectiveness of
application. The highly popular
Personal Back line continues to
provide the comfort, postural
support, and spinal alignment
that you have come to expect.
Features
• Lightweight aluminum shell
• Pre-contoured shell provides
excellent contact and support
• Pre-drilled headrest pattern
• Quick Set™hardware with
increased adjustability
• Bariatric sizes available: 22", 24"
and 26" widths at 500 lb. weight
capacity
Personal Back™ 10
Model no. PBR, PBT
The Personal Back10 is an excellent choice for clients who
require comfort and stability with moderate midline support.
Personal Back™ 10 Plus
Model no. PPR, PPT
The Personal Back10 Plus is an excellent choice for clients
who require comfort and stability with increased midline
support. It often is recommended when using the foam-inplace kit.
Pre-drilled headrest mounting pattern
accommodates most major manufacturers’
headrest systems.
Lightweight, durable, aluminum shell is precontoured to provide excellent contact and
support.
Width 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26"
A 12.25 12.25 13.25 13.25 14.25 14.25 15.25 15.25 16.25 16.25 17.25
B 9.50 10.50 11.50 12.50 13.50 14.50 15.50 16.50 18.50 20.50 22.50
C 5.00 5.25 5.50 5.50 5.75 5.75 6.00 6.00 6.50 6.75 7.25
Width 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26"
A 13.00 13.00 14.00 14.00 15.00 15.00 16.00 16.00 17.00 17.00 18.00
B 9.50 9.50 10.50 10.50 11.50 11.50 12.50 12.50 13.50 13.50 14.50
C 6.75 7.00 7.25 7.25 7.50 7.50 7.75 7.75 8.25 8.5 8.75
Personal Back™10
Personal Back™10 Plus
Personal Back™10
Personal Back™10 Plus
Personal Back Back Heights
Width Regular Tall
13" - 14" 14" 16"
15" - 26" 16" 19"
Dimensions
All measurements in inches.
Invacare®Backs
HCPCS Code = E2615, E2616
7
Invacare
®
Backs
Invacare®Backs
Introducing the Invacare®InTouch™Propel™, the general purpose back support so lightweight and comfortable consumers will forget
it’s there. Hardware installation is no longer a hassle: just grab it, set it and go. The rigid shell coupled with a soft contoured foam
cushion provides gentle support and facilitates postural symmetry. The Propel provides a stable surface for propulsion and
completion of daily living activities. Consumers will leave ordinary back upholstery in the past when they try the new InTouch Propel.
Features
Model no. ITPR
• 4-way adjustability: height/width/depth/angle
• 1-handed quick release
• 1-tool assembly (7/8" wrench)
• 2-point mountings fit 7/8" to 1" canes
• 3-point comfort foam
• Adjustment while patient is seated
1-handed quick release
Adjust depth/angle while client is seated
Comfort and contour
Positioning
Support
Scapular cut-outs
Redundant
tissue cut-outs
HCPCS Code = E2611
Fits 7/8" or 1" canes with no additional hardware.
9
Invacare®Seating & Positioning Accessories
Invacare
®
Seating & Positioning Accessories
Full Tray - Slide-on Mount
• Break-resistant clear polyester
resin tray surface
• Width adjustable mounting
hardware securely fastens tray to
chair arm pads
• Molded-in rim helps keep items
on tray
Full T ray Hook and Loop Mount
• Break-resistant clear polycarbonate
tray surface
• Easily attaches to chair armrest
with hook and loop straps
• Removable trim allows thorough
cleaning
Half Tray - Swingaway ➤
• Break-resistant clear polycarbonate
tray surface
• Tray securely bolts to wheelchair
armrest
• Tray easily swings away when
not in use
Belts and Straps ➤
• Three sizes of shoulder supports
fit child, junior and adult
• Three sizes of padded lap belts fit
child, junior and adult - pinch
release buckles
• Push-button style release provides
secure attachment
• Three sizes of four-point lap belt to
fit child, junior and adult - push button release buckle
10
Invacare®Seating & Positioning Accessories
Invacare
®
Seating & Positioning Accessories
Cushion Rigidizer
• Lightweight plastic seat insert
• Securely attaches to bottom of
cushion inside cover
• Fits between seat rails for level
support
• Eliminates hammock effect of
seat upholstery
Adjustable Headrests ➤
• Contoured head and neck supports
available in four styles
• Dual-ball swivel hardware for
multi-plane adjustment
• Durable steel reinforced
polyurethane pads - easily
wipe clean
Foam-In-Place Kit
• Easy-to-use Foam-in-Place kit
provides custom foam mold insert
in minutes
• Can be used with Personal
Back
™
10/Personal Back™10 Plus
Basic Headrest ➤
• Padded to provide comfortable
occipital support
• Horizontal and vertical adjustable
hardware
• Outer cover easily removes for
laundering
Infinity®Drop Base
• Width adjustable: Three sizes fit
wheelchairs from 14" to 22" wide
• Height and angle adjustable:
Up to 2" of drop provided
• Portable quick-release hardware
allows easy removal of base from
wheelchair
➤
➤
➤
➤
➤
Loading...