Invacare Allegro 01-209, Allegro 44035-4190 User Manual

Invacare

®

Allegro

®

Wheelchair

Invacare

®

Allegro

®

Wheelchair

Invacare Corporation

www.invacare.com

USA

One Invacare Way
Elyria, Ohio
44035-4190
[phone]

Canada

570 Matheson Blvd. E.,
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
[phone]

© 2004
Invacare Corporation

Form No. 01-209
Rev 05/04

Invacare and Allegro are
registered trademarks
and Yes, you can.and the
blue medallion design are
trademarks of Invacare
Corporation.
Specifications are subject
to change without
notification.

Highlights

• Adjustable-depth frame

• Modular crossbrace system

• Grows from 12" x 12" to 20" x 18"

• Reclining back available

• Rigid model available

• Available without seat rails

• Reinforced caster headtube mounting

system

• Several axle plate choices

• Numerous seat-to-floor height

positions

T

he Invacare®Allegro®chair is the ultimate in versatility. Designed from the ground up as a
complete mobility system, the Allegro addresses multiple positioning needs and growth

requirements. Its adjustable-depth and adjustable-angle back and modular cross-brace system
ensure a perfect fit and adapt to any seating and positioning system. Choose between the folding or
rigid model; a version without seat rails for a lower seat-to-floor height; or the reclining back, which
is interchangeable with the fold-down back.

Specifications

Dimensions
Overall* seat width plus 8.5"
Width 12"-20" in 1" increments
Depth 12"-18" in 1" increments
Front seat-to-floor 3" 5" 6" 8"

Fork Type Caster Caster Caster Caster
3" 15",16.25" 16",17.25" n/a n/a
3" fork/1" spacer 16",17.25" 17",18.25" n/a n/a
3" fork/2" spacer 17",18.25" 18",19.25" n/a n/a
5" 16.5",17.75" 17.5",18.75" 18",19.25" n/a
5" fork/1" spacer 17.5",18.75" 18.5",19.75" 19", 20.25" n/a
6" upper mounting 16.25",17" 16.5",17.25",18" 17",17.75",18.5" n/a
6" lower mounting 17.5",18.25" 17.75",18.5",19.25" 18.25",19",19.75" n/a
8" 2 holes n/a n/a n/a 18.75", 20",

21.25"

Rear seat-to-floor**

20" 14.75" - 19.25"
22" 15.75" - 20.25"
24" 16.5" - 21"

Knee-to-heel*** min. max.

70˚ tapered footrest 16.25" 20.25"
70˚ swingaway footrest 14" 19"
70˚ MFX footrest 8.25" 14"
Elevating legrest 15.75" 21.75"
90˚ swingaway footrest 5.75" 10.75"
60˚ swingaway footrest 15.25" 19"
60˚ MFX footrest 11.5" 15.5"

Cane options

Sportster 10"-14" adjustable n/a fixed
10˚ with push handles 16"-18" adjustable n/a fixed
Straight with push handles 12"-16" adjustable 16"-20" fixed

Arm height† Folding frame with Rigid frame without

seat rails seat rails
Adjustable, dual-point 10"-14" conventional n/a
Fixed, dual-point 10" conventional n/a
Cantilever 5"-10" 7"-12"
T-Arm n/a 6"-10" .5 increments

8"-14" 1" increments
Weight 250 lb.
Limited warranty Lifetime on frame and crossbraces

*Measurement taken from outside of handrim to outside of handrim with 0˚ camber.
** Rigid frames and folding frames without rails, subtract 1.75" from seat-to-floor height to obtain distance from
top of side frame. R ange adjusts in 5/8" increments.
***Range adjusts in 1" increments. Measurement taken from top of seat rail to back of footrest.
†Measurement taken from top of seat rail to top of armrest. Range adjusts in 1" increments.

Hydraulic cylinders offer smooth recline of up to 170°.

The Allegro without seat rails lowers seat-to-floor height by

1.75" and is ideal for use with seating systems.

The Allegro’s unique modular crossbrace system
allows a host of configuration possibilities.

The rigid Allegro model provides a stiffer ride and easy
integration of seating systems.

Adjustable-angle stroller

handles provide maximum

flexibility in adjusting the

chair’s geometry.

The Invacare Transport
Ready option consists of four
factory-installed tie down
brackets that meet today’s
ANSI/RESNA WC19 vol.1 ­section 19.5.3 standard for
the frontal impact test.*

‘‘Invacare says ‘Yes, you can™,’
and I couldn’t have said it
better myself.’’

*As tested with the Invacare®KSS Seating System. Invacare has not performed testing with any other seating
system. Invacare recommends that wheelchair users NOT be transported in vehicles of any kind while in
wheelchairs. As of this date, the Department of Transportation has not approved any tie-down system for
transportation of a user while in a wheelchair in a moving vehicle of any type.