Page 1
INSTALLATION AND CONNECTION OF
+ +
THE KEY SAFE
GENERAL POINTS
The smart key safe makes managing your keys and premises easy.
The key safe is available with and without a proximity reader:
With proximity reader included in IntraBox key safe.
Without proximity reader to add to existing installation.
You can choose a model to be fitted flush or projecting from the wall, or one that can be
fitted to another installation (a post, pre-hung door, etc.)
The product is available in two versions:
A “Basic” version with a “mechanical” hook.
An “Exclusive” version with an electronic key holder and key monitoring system.
The key safe must be connected in “Real Time” to the following equipment:
2-4 door units (ref: 03-0101-EN).
1 door unit (ref: 03-0102-EN).
GPRS Unit (ref: 17-0102-EN).
There are three ways to open the key safe to access the stored keys:
With an authorised masterkey fob.
By entering a special code
By calling the manager from an intercom, who then opens the key safe using their
mobile.
Product description:
Key safe:
Three hooks for storing keys up to 12cm long.
A confirmation tone when the key safe is opened by its motor.
Manage key monitoring alerts.
Manage the key safe remotely and in real time via our website: www.intratone.com in the
“management website” tab"
Flush fitted or box
Integrated unit
Or
X 4
EN-V233 - 5008 - AA - Fitting and user guide for the INTRATONE Key safe
Page 1 / 12
Page 2
CONTENTS
GENERAL POINTS ----------------------------------------- 1
CONTENTS --------------------------------------------------- 2
DIMENSIONS AND ASSEMBLY ------------------------ 3
A) D
B) C
C) C
D) D
E) D
IMENSIONS: FLUSH FITTED OR BOX
ASE DIMENSIONS (FLUSH FITTED
ASE DIMENSIONS (BOX
IMENSIONS (INTEGRATED UNIT
RILLING FOR INTEGRATED UNIT
) ------------------------------------------------------------- 4
) -------------------------------------------------- 4
) ---------------------------------------------------- 5
---------------------------------------------------- 6
----------------------------------------------- 3
WIRING -------------------------------------------------------- 7
DEVICE CONFIGURATION ------------------------------ 8
A) G
B) H
C) I
ENERAL
OW TO ADD AN EXTENSION TO AN EXISTING DEVICE
NSTALLATION OF AN INTRABOX KEY CABINET
-------------------------------------------------------------------------------- 8
----------------------------------- 10
---------------------------- 9
POST-INSTALLATION CHECKS --------------------- 10
BREAKDOWN DIAGNOSTIC -------------------------- 11
CERTIFICATE OF COMPLIANCE -------------------- 11
A) S
B) C
TANDARDS
ERTIFICATIONS
: -------------------------------------------------------------------------- 11
: --------------------------------------------------------------------- 12
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 2 / 12
Page 3
DIMENSIONS AND ASSEMBLY
A)
D
IMENSIONS: FLUSH FITTED OR BOX
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 3 / 12
Page 4
B)
C
ASE DIMENSIONS (FLUSH FITTED
)
C)
C
ASE DIMENSIONS (BOX
)
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 4 / 12
Page 5
D)
D
IMENSIONS (INTEGRATED UNIT
)
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 5 / 12
Page 6
E)
D
RILLING FOR INTEGRATED UNIT
Drill the panel that will hold the key safe
Attach the pins
Fix the key safe and screw into place from rear
Wiring
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 6 / 12
Page 7
Power Supply
+
-
WIRING
Only
connect one
key
safe
per electrical
unit
Depending on
model
POWER SUPPLY The key safe is powered from the electric station or unit with
+/- terminals.
WIRING : Twisted pairs – Diameter: 0.8 – Max. distance 100m.
Towards electric
stations or GPRS
12-24V DC 2A
Note:
17-0102-EN
04-0104-EN
For 03-0101-EN units, the key safe can be connected to any terminal:
11 to 14 or 21 to 24
31 to 34 or 41 to 44 (extension card)
station or unit
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 7 / 12
Page 8
DEVICE CONFIGURATION
From
www.intratone.
com
“Key
Safe
” tab
From
www.intratone.com
“Key
Safe
” tab
From
www.intratone.com
“Key
Safe
” tab
F)
G
ENERAL
Key safes are always configured on the management website: www.intratone.com in the
“management website” tab.
On the website, you can manage
- How your key safe is opened.
- The settings for alerts (e.g. Breaking of the key safe alert, etc.).
- Monitoring for keys stored in the key safe (exclusive version).
Please note: The “Mobile key” feature is not available for this device.
Three ways to open your key safe:
Fob
Keypad
Code
Telephone
Code
- Choose a key safe and then select a masterkey fob
that will be used to open it.
- Update your device in “real time”
In front of the key safe:
- Hold the masterkey fob in front of the read head for at
least 5 seconds.
- The key safe will unlock.
- Choose a key safe and then select a keypad code for
a panel or coded keypad that will be used to open the
key safe.
- Update your device in “real time”.
In front of the key safe:
- Enter the code using the keypad
- The key safe will unlock.
- Choose a key safe and then select a telephone code
for a panel that will open this key safe. (Note: A code
must contain at least 4 characters.)
- Update your device in “real time”
In front of the key safe:
- A technician calls you from the panel.
- You answer the call and enter the code on your
telephone keypad.
- The key safe will unlock remotely.
Alerts
Key safes can emit alerts (“Key safe door opened”, “Breaking” or “key monitoring”).
At www.intratone.com in the “management website” tab:
You can set the message to send and add the recipient’s email address.
In front of the key safe:
When an event occurs, an email is sent to the recipient containing the relevant information.
Monitor keys stored in the key safe (exclusive version).
This feature is used to monitor keys stored in the key safe. It is only available on the
exclusive version of the key safe.
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 8 / 12
Page 9
G)
Gate
Gate
H
OW TO ADD AN EXTENSION TO AN EXISTING DEVICE
Adding a key safe without reader to a 03-0101-EN unit already equipped with a
intercom opening a gateway:
There may be only one key safe per central unit.
HF
Adding a key safe without a reader to an Eco Keypad kit with reader installed.
/ 4
/ 6
/ 4
/ 2
or
/ 4
/ 4
/ 4
/ 6
Use the panel to remotely open the key
safe:
Reader: Fob
Keypad: Key codes
Call feature: Telephone codes.
/ 4
Use the coded keypad to remotely open
the key safe.
Reader: Fob
Keypad: Key codes
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 9 / 12
Page 10
H)
I
NSTALLATION OF AN INTRABOX KEY SAFE
For further details, please consult the diagram EN-V234 - 0008 - XX
/ 4
Opening
with a fob
POST-INSTALLATION CHECKS
Make the following checks once you have completed the installation:
Does the read head react when a fob is passed over it?
When the key safe is opened, do you hear a confirmation alert?
Does the key safe open and close?
To mechanically open the key safe
Use the latch
Does the 3G or GPRS have a good reception?
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 10 / 12
Page 11
BREAKDOWN DIAGNOSTIC
What is a breakdown?
The reader’s LED does not
light up
The key safe door will not
open
Contact our technical support on +33 (0)251 655 184
What caused the
breakdown?
- Reader covered
- No power
- Incorrect + / - wiring
- Incorrect settings used
on website
- Incorrect D+ / D- wiring
- Fob reading time
- The fob is a resident fob
How to solve the problem!
- Check connections to the read
head
- Check wiring
- Check settings on website
- Check wiring/settings
- Hold the fob in front of the
reader for over 5 seconds
- Program a fob
CERTIFICATE OF COMPLIANCE
I)
S
TANDARDS
EC Standards:
The key safe complies with directive R&TTE 1999/5/EC: applicable electrical safety
standard EN 60950(2001), applicable EMC standard EN 301 489-3(2002), applicable
radio standard EN 300 330-2(2001).
The key safe complies with telephone network standards TS-103 021 and TR-103 000.
Wiring:
The control unit’s wiring must not be installed near other sources of energy (mains
power, for example).
Guaranteed operating conditions:
The key safe is guaranteed to work at temperatures of between -20°C and +70°C and
in relative humidity that does not exceed 70%.
Recycling at end of life:
The key safe and its accessories must not be disposed of with unsorted waste,
but must be collected for recycling as Electrical and Electronic Waste.
:
EN-V233 – 5008 – AA - Fitting and user guide for the INTRATONE Key safe
Page 11 / 12
Loading...