Intratone EEN-MEDGE User Manual

Fitting and connecting the GSM EEN

TOP

BOTT

Fitting and connecting the GSM EEN----MEDGE unit

Fitting and connecting the GSM EENFitting and connecting the GSM EEN

MEDGE unit

MEDGE unitMEDGE unit

Residential

EC standards:

- The GSM unit complies with the R&TTE Directive 1999/5/EC: electrical safety standard EN

60950(2001) applied, EMC standard EN 301 489-3 (2002) applied, radio standard EN 300
330-2 (2001) applied.

- The GSM unit complies with GSM standards (Radio spectrum) EN 301 511 and 3GPP 51.010-

1.

- The GSM unit complies with EMC standards EN 301 489-1 and EN 301 489-7.

Cabling:

- -The cables connected to the central unit must not be placed in the vicinity of other sources of

electrical power (e.g. mains power supply).

- 3-pairs twisted cable using min 0.50 mm diameter wire.

Operating warranty

- The GSM unit is guaranteed to operate within a temperature range of between -20°Cand

+70°Cand for relative humidity that does not exceed 70%.

- The module's tab must be folded over to protect the module from rainwater.

End of life product recycling:

The GSM unit and its accessories must not be disposed of with unsorted municipal waste, but
must follow the WEEE (Waste Electrical and Electronic Equipment) collection and recycling

channel.

The GSM unit's LEDS
show the GSM network
reception quality around the
installation:

"The more LEDS are on,
the better the reception".

Operation will be optimal
from 3 LEDs on.

 A low level of reception may result in it becoming impossible to make calls or

updates. We therefore advise you to carry out several tests in order to find the
location that provides the best level of reception (the GSM unit can be moved
up to 100m).

 The GSM unit can be fitted both outside and inside.

 N

EVER FIT THE MODULE INSIDE A METAL CASE

!

Fitting and connecting the Intratone Residential GSM EEN-MEDGE unit

Page 1 / 2 V231 – 0038 – AE

Connection of the GSM module to an Intratone Residential central unit:

2 2 2

1 2 3 4 5 6

1 2 3 4 5 6 7 8 9 10 11 12

11

T

12 14 15 16 17 18 C R

V1 V2

13

EEN

-

PIC

2 2 2

+ - D+ D- A+ A-

Power supply

+

-

1 2 3 4 5 6 7 8 9 10 11 12

C R T

1 2 3 4 5 6 7 8 9 10 11 12

C R T

O

N TERMINAL BLOCKS 11 TO 16 OF THE RESIDENTIAL CENTRAL UNIT



Always connect the GSM module to these terminal

blocks

Connector 1 of the central unit

11 to 19 and CRT

11 13 14 15 16 17 18 19

12

+ - D+ D- A+ A-

Max cabling:

- 200 m using 0.8mm

- 100 m using 0.5mm

Connector 2 of the central unit

21 to 29 and CRT

21 23 24 25 26 27 28 29

22

Connector GSM module

EEN-CEN-12

EEN-MEDGE-D

Connection of the GSM module to an Intratone panel:

The GSM EEN-MEDGE module is fitted with removal terminal
blocks

1. Connect the 6 cables so that the removable terminal blocks

POINT DOWNWARDS

2. Fit the terminals to the module's 6 Picos.

3. Switch on the installation and check the state of the

module's LEDs

IntraCode panel connectors

+ - D+ D- A+ A-

Max cabling:

- 200 m using 0.8mm

- 100 m using 0.5mm.

Removal terminals from the GSM unit

.

GSM module Connector

+ - D+ D- A+ A-

+ -

EEN-MEDGE-D

D+ D- A+ A-

Fitting and connecting the Intratone Residential GSM EEN-MEDGE unit

Page 2 / 2 V231 – 0038 – AE