Intralot PN224, PN324, PN223, PN323 User Manual
User Manual
Genion II
[PN223, PN323,
PN224, PN324]
Version 4.0
Confidential
Confidential | Final
Information Owner: K. Vrahatis
2
of 20
Approval, Distribution, and Revision History
Version
Date
Author(s)
Content
Reviewer(s)
QA
Reviewer
Information
Owner
Approved for
Release by
Comments
1.0
05.01.2018
T. Lekkas
L. Papanastasiou
N. Angelopoulos
T. Lekkas
K. Vrahatis
S. Rentifis
First Release
2.0
26.04.2018
T. Lekkas
L. Papanastasiou
T. Lekkas
K. Vrahatis
S. Rentifis
Updated: FCC RF Radiation Exposure
Statement, p.5
3.0
10.05.2018
T. Lekkas
L. Papanastasiou
A. Diamandis
T. Lekkas
K. Vrahatis
S. Rentifis
Updated: FCC Caution, p.5
4.0
15.05.2018
T. Lekkas
L. Papanastasiou
T. Lekkas
K. Vrahatis
S. Rentifis
Updated: Operating & Environmental
Conditions – Dimensions – Technical
Specifications
Code: 6.500.010
Distribution List: INTRALOT S.A.
USER MA NUAL
Genion II [PN223, PN323, PN224, PN324]
QMS.PR.1.F.13 | User Manual Template v2.0
Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
3
of 20
INTRALOT, 2014 All rights reserved.
All copyright, intellectual and industrial rights in this document and in the technical knowledge
it contains are owned by INTRALOT and/or their respective owners.
This document is made available to the end users only for their internal use.
No part of this document nor any data herein may be published, disclosed, copied,
reproduced, redistributed by any form or means, electronically or mechanically, or used for
any other purpose whatsoever without the prior written approval of INTRALOT.
All trademarks and copyrights mentioned herein are the property of INTRALOT and/or their
respective owners.
Any rights not expressly granted herein are reserved.
Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
4
of 20
Table of Contents
1 CONFORMITY, COMPLIANCE AND SAFETY ................................................................................... 5
2 SAFETY AND PRECAUTIONS ............................................................................................................ 6
3 OVERVIEW ........................................................................................................................................... 8
4 GETTING STARTED ............................................................................................................................ 9
4.1 UNPACK THE EQUIPMENT ................................................................................................................ 9
4.2 PORTS AND MODULES .................................................................................................................... 9
5 PREPARE TERMINAL FOR USE ...................................................................................................... 11
5.1 REMOVE GENION SD CARD ........................................................................................................... 11
5.2 INSTALL GENION IMAGE ................................................................................................................ 12
5.3 PREPARE GENION ........................................................................................................................ 13
6 TEST GENION .................................................................................................................................... 14
6.1 DIAGNOSTICS SCREEN .................................................................................................................. 14
6.2 ETHERNET PING ........................................................................................................................... 15
6.3 MAC ETHERNET .......................................................................................................................... 15
6.4 MEMORY TEST ............................................................................................................................. 15
6.5 BARCODE SCANNER ..................................................................................................................... 15
6.6 USB HOST TEST .......................................................................................................................... 15
6.7 IRBEAM TEST ............................................................................................................................... 16
6.8 TOUCH PANEL .............................................................................................................................. 16
6.9 BACKLIGHT TEST .......................................................................................................................... 16
6.10 TFT PANEL TEST ......................................................................................................................... 17
6.11 AMBIENT SENSOR TEST ................................................................................................................ 17
6.12 SAVE LOG .................................................................................................................................... 17
7 TROUBLESHOOTING ....................................................................................................................... 18
8 OPERATING & ENVIRONMENTAL CONDITIONS – DIMENSIONS – TECHNICAL
SPECIFICATIONS ...................................................................................................................................... 19
Table of Figures
FIGURE 1: SD CARD PORT .............................................................................................................................. 9
FIGURE 2: I/O BOARD ................................................................................................................................... 10
FIGURE 3: BARCODE SCANNER MODULE ........................................................................................................ 10
FIGURE 4: GENION DIAGNOSTICS SCREEN ..................................................................................................... 14
FIGURE 5: TECHNICAL SPECIFICATIONS ......................................................................................................... 19
Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
5
of 20
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation.
(3) FCC ID: 2ADEN-INTRALOT-GNN2 doesn’t include RF TX function except NFC、
WIFI
FCC RF Radiation Exposure Statement
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
1 Conformity, Compliance and Safety
The current Manual for the Genion II [PN223, PN323, PN224, PN324] lottery terminal is
provided in order to guide the authorized service personnel throughout the installation of
these terminals in the Lottery shops, agencies or in any other public environment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
6
of 20
Attention:
Please read the safety warnings and the precautions provided in the
following paragraphs, to ensure that you use your terminal safely. Do not
attempt to use the terminal in any way not described in this manual.
Warning:
Failure to follow these recommendations could result in serious injury to
the personnel or in damage to the terminal.
Warning:
High Voltage, disconnect power supply and power off UPS before
moving or servicing
connections and grounding or mounting hardware.
floors, ungrounded power extension cables and missing safety
grounds.
the equipment.
the carton box until its installation.
items that could get caught in the equipment.
2 Safety and Precautions
Electrical Safety Warning
Electrostatic Discharge Warning
Safety Instructions
The environment for use must be within the range specified in the environment
specifications.
Follow all applicable regulations when making power connections and
grounding or mounting hardware.
Avoid using power extension cables.
Always keep the equipment and site area clean and free of dust.
Always use the power ON/OFF switch to turn the equipment on and off.
Disconnect any power cables prior to moving the equipment.
Locate a power outlet near the equipment for quick and easy removal of the
power plug in case of emergency.
Loading...