Disposal of old electrical and electronic equipment (applicable through the
or on its packaging, indicates that electrical and electronic equipment may not be
By ensuring the correct disposal of this product, you will help prevent potential
By recycling, reusing and other forms of recovery of old electrical and electronic
equipment you are making an important contribution to the conservation of natural
purchased this product.
ηλεκτρικών και ηλεκτρονικών συσκευών βοηθούν στη διαφύλαξη των φυσικών πόρων
(www.electrocycle.gr).
European Union and other European countries with separate waste collection
systems).
This symbol, found on this product and any of it s parts or on it s ope r ating inst ructi ons
disposed of as unsorted municipal waste. Instead, this prod uct should be handed over
to applicable collection points for the recycling of electrical and electronic equipment.
negative consequences to the environment and human heal th, which could other wise
be caused by inappropriate disposal of this product .
resources and to the protection of the environment.
For more information about the recycling of thi s product, please contact your local
municipal authorities, municipal waste dispo sal service or the store where you
StreetNode 6250 PTP with Embedded Node Manager
WebGUI Commissioning Manual - Ed1.1
•
Απόρριψη παλαιών ηλεκτρικών και ηλεκτρονικών συσκευών (ισχύει στην
Ευρωπαϊκή Ένωση και άλλες Ευρωπαϊκές χώρες με συστήματα χωριστής
συλλογής απορριμμάτων).
Το σύμβολο αυτό, που απεικονίζεται πάνω στο προϊόν και σε τυχόν εξαρτήματα του
ή στο εγχειρίδιο οδηγιών του ή στη συσκευασία του, δείχνει ότι οι ηλεκτρικές και
ηλεκτρονικές συσκευές, μετά το πέρας της λειτουργίας τους, δεν θα πρέπει να
απορρίπτονται μαζί με τα αστικά απόβλητα. Αντίθετα θα πρέπει να παραδίδονται σε
κατάλληλα σημεία συλλογής για την ανακύκλωση των ηλεκτρικών και ηλεκτρονικών
συσκευών.
Διασφαλίζοντας τη σωστή απόρριψη αυτού του προϊόντος, συνεισφέρετε στην
πρόληψη πιθανών αρνητικών συνεπειών στο περιβάλλον και την ανθρώπινη υγεία,
οι οποίες θα μπορούσαν να προκληθούν από την μη ενδεδειγμένη απόρριψη του
προϊόντος.
Η ανακύκλωση, επαναχρησιμοποίηση και άλλες μορφές αξιοποίησης των παλαιών
και στην προστασία του περιβάλλοντος.
Για περισσότερες πληροφορίες σχετικά την ανακύκλωση αυτού του προϊόντος,
παρακαλούμε επικοινωνήστε με τις τοπικές δημοτικές αρχές, την υπηρεσία
αποκομιδής αστικών αποβλήτων ή το κατάστημα από το οποίο αγοράσατε το
συγκεκριμένο προϊόν.
Για περισσότερες πληροφορίες, μπορείτε να επικοινωνείτε με το Συλλογικό Σύστημα
Εναλλακτικής Διαχείρισης Αποβλήτων Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού
“Ανακύκλωση Συσκευών Α.Ε.”
•
-III-
StreetNode 6250 PTP with Embedded Node Manager
on page 12.
Standards of Complianceστην σελιδα 12.
WebGUI Commissioning Manual - Ed1.1
Declaration of Conformity
Hereby, Intracom S.A. Telecom Solutions declares that the product
StreetNode
6250 PTP is CE marked, complying with the requirements of
the R&TTE Directive 1999/5/EC , EMC Directive 2004/108/ΕC, LVD
Directive 2006/95/ΕC, ΕCO Design Directive 2009/125/EU & with the
requirements of the RoHS Directive 2011/65/ΕU.
The product complies to all relevant FCC regulations.
For further information, please refer to Appendix A: Standards of Compliance
Δήλωση Συμμόρφωσης
•
Με την παρούσα, η Intracom Α.Ε. Τηλεπικοινωνιακών Λύσεων δηλώνει ότι
το προϊόν
προς τις απαιτήσεις και τις λοιπές διατάξεις των οδηγιών R&TTE 1999/5/EC,
EMC 2004/108/ΕC, LVD 2006/95/ΕC, ΕCO Design 2009/125/EU καθώς και
με τις απαιτήσεις της οδηγίας RoHS 2011/65/EU.
Το προϊόν συμμορφώνεται σε όλους τους σχετικούς κανονισμούς της
Ομοσπονδιακής Επιτροπής Τηλεπικοινωνίων της Ηνωμένων Πολιτειών
Αμερικής (FCC).
Για περισσότερες πληροφορίες παρακαλώ δείτε το παράρτημα
•
StreetNode 6250 PTP φέρειτηνσήμανση CE συμμορφούμενο
Appendix A:
•
-IV-
Radiation Safety
Introduction
Regulations
Any radio equipment is emitting Radio Frequency (RF) radiation through its
antenna.
In the StreetNode
inside the unit’s enclosure.
It is important to follow any local, national or international regulation during
installation and operation of the radio equipment to minimize radiation
hazards.
Many countries have issued and follow their own RF safety regulations,
while many others have adopted international regulations, standards or
guidelines.
In Europe, some countries follow the recommendations included in the
1999/519/EC directive, which is based on the guidelines document published
by the International Commission on Non-Ionizing Radiation Protection
(ICNIRP).
The above mentioned European directive provides the reference levels
(limits) for assessment of the human exposure to electromagnetic fields
based on health effects. Other regulators may define different reference
levels.
The European Union and U.S. regulator (FCC) Reference Levels for the
microwave frequencies are given below:
Regulation
1999/519/EC 2.0 – 300 61 V/m 10 W/m2 General Public
FCC OET 65 1.5 – 100 - 1 mW/cm2
FCC OET 65 1.5 – 100 - 5 mW/cm2
StreetNode 6250 PTP with Embedded Node Manager
WebGUI Commissioning Manual - Ed1.1
TM
6250 PTP radio, the antenna is integrated and located
As a general rule, it is expected that the highest level of emission would be
at the antenna emission lobe maximum, in direct line-of-sight condition and
in the close vicinity of the antenna.
Additional requirements for the installation of the StreetNode
radio shall be as follows:
The radio should be located in such a way to prevent the public from
•
accessing the area where the RF radiation exceeds the regulation limits.
For this, a compliance boundary is determined, based on its radio
characteristics. Outside this area, the RF radiation levels are below the
reference levels (limits).
Operation and maintenance personnel, which have to work within the RF
•
radiation compliance boundary area, should be informed about the source
of radiation and should have the capability to power off the radio
equipment before entering the compliance boundary area.
The compliance boundary area should be defined by a relevant warning
•
sign or physical barrier.
TM
6250 PTP
Continued on next page
-VI-
StreetNode 6250 PTP with Embedded Node Manager
Parameter
Value
Compliance Boundary (General Public)
0,64
m
RF exposure compliance boundary studies / reports are available
upon request.
1999/519/EC, COUNCIL RECOMMENDATION of 12 July 1999
on the limitation of exposure of the general public to
ELECTRIC, MAGNETIC, AND ELECTROMAGNETIC FIELDS
Radiation Safety, Continued
Compliance
boundary
definition
The Compliance Boundary Definition for StreetNodeΤΜ 6250 PTP is shown to
the following table below:
WebGUI Commissioning Manual - Ed1.1
Max EIRP 40,0
Max EIRP (worst case conditions) ~47,0
Power Flux Density Limit (General Public) 10,0
Power Flux Density Limit (Occupational) 50,0
Compliance Boundary (Occupational) 0,29
dBm
dBm
W/m
W/m
m
10,0
~50,00
2
2
W
W
The above calculations are based on information available at the
time of issue of the current document.
References
-
electromagnetic fields (0 Hz to 300 GHz).
- OET Bulletin 65, Evaluating Compliance with FCC Guidelines for
Human Exposure to Radiofrequency Electromagnetic Fields,
Edition 97-01, August 1997.
- GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING (UP TO 300 GHz), International Commission on Non-Ionizing
Radiation Protection (ICNIRP), 1998
-VII-
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.