Sport HD II
Xtreme Imaging
Table of Contents：
Preface………………………………………………………1
Main features ……………………………………………......1
Computer operating system requirements..……………..... 1
Prestart Guide…………………………………...........3
Basic installation…………………………………………….3
Video mode……………………………………………….....6
Settings…………………………………………………13
Photo mode...……………………………………………....17
Settings…………………………………………………24
Playback mode..…………………………………………...28
Specifications………………………………………………29
Notes: This manual contains important safety and operating information. Please read all
the information carefully before you use the device to avoid accidents and keep it for
future reference.
0
Preface：
Thank you for purchasing the Intova Sport HD II waterproof action camera! Key
features of the model SP1 N include: 1080P Full HD, built in LCD screen, full menu control
buttons for easy operation, a rugged, ergonomic and compact outer casing that is waterproof
to 60 meters/200 feet and floats. Sport HD II will help you enjoy high quality video and
photos for all your recreational activities.
Visit www.intova.net to view the wide range of mount options available to help fully
utilize this great camera. Enjoy!!
Main features：
* Video resolution：1080P （1920×1080 30fps）
* Photo resolution：12M 4000X3000Pixels (by interpolation)
8M 3200X2400Pixels (by interpolation)
5M 2592X1944Pixels
3M 2048X1536Pixels
* 1.5 inch TFT LCD
* 4x Digital Zoom (Zoom function cannot be used in 1080P mode.)
* 140° wide angle lens
* Built in rechargeable 1450mAh lithium-ion battery
* Supports Micro SD card up to 32GB (class 6 minimum, for 1080p video recording class 10
is recommended)
720P （1280×720 60fps）
720P （1280×720 30fps）
WVGA1 （848×480 60fps）
WVGA （848×480 30fps）
VGA （640×480 30fps）
Accessories：
User’s manual CD / USB cable / TV out cable / hand strap
Computer operating system requirements：
PC computer operating system requirements for playback of 1080p and 720p video:
Windows XP (Service Pack 2 or later)/Vista/Windows 7/Windows 8
1 GB of system RAM minimum
3.2 GHz Pentium 4 processor or faster
Direct X 9.0c or later
Video card with 256MB of RAM minimum
Recommended screen resolution 1600x900 (minimum 1024x768)
1
Macintosh computer operating system requirements for playback of 1080p and 720p
video:
Mac OSX (version 10.4.11 or later)
1 GB of system RAM minimum
2.0 GHz Intel Core Duo or faster
Video card with 256MB of RAM minimum
Recommended screen resolution 1600x900 (minimum 1024x768)
Computer operating system requirements for playback of VGA video.
Windows 2000/XP :
●128 MB RAM, more than 125 MB free disk space .
●Available USB Interface .
●Recommended screen resolution 1024 × 768 pixels or higher .
●16-bit color or higher display adaptor .
Windows Vista :
●800MHz processor and 512 MB of system memory .
●20GB hard drive with at least 15GB of available space .
●Support for Super VGA graphics.
●Available USB Interface.
Windows 7 :
●1 GHz or faster 32-bit(x86) or 64-bit (x64) processor.
●1GB RAM (32-bit) or 2GB RAM (64-bit).
●16GB available system RAM(32-bit), 20GB(64-bit) .
●WDDM1.0 or higher version driver’s Direct X9 graphics device .
Macintosh :
●Power Macintosh G3 500 MHz or higher .
●Mac OS X version 10.2.6 or later .
●128 MB or more available system RAM (256 MB recommended), 150 MB free disk
space .
●800 x 600 or higher-resolution monitor displaying millions of colors .
Handling notice before use：
• Do not attempt to take apart the camera as there are high voltage parts and dangerous
electric shock can occur.
• If the camera is dropped or smashed and internal parts are exposed, do not touch as there is
a danger of electric shock.
• Do not leave the camera in direct sunlight or near heat sources as these can damage the
camera.
• If camera becomes hot during use, turn off the power immediately.
• For storage, remove the memory card and keep camera in a cool, dry place with housing
door slightly open.
• SPI floats. Intova flotation strap (optional accessory) is recommended as extra precaution for
water use.
2
Product Structure：
Basic：
Open the housing：
Follow the indicated directions in the figure below to open the housing. Sometimes a
vacuum seal may occur, use thumb press system to open.
3
Insert memory card：
Follow the indicated direction in the figure below to insert Micro SD memory card.
After the card is inserted, the icon will be shown on the LCD.
* Please turn off the power when inserting or removing the memory card.
Notice：
1. Format the memory card before use
2. If the camera does not work with the memory card, please try a new card.
3. The camera can’t record video or take photos without a properly inserted memory card.
USB charging and transferring：
Connect your computer to SP1 N with the USB cable. After connection, press the
power button, and then use Up/Down buttons to select MDSC/CHARGE/OPEN.
MDSC： Enter to download video or image files.
CHARGE：Charge or recharge the battery power. Full charging time is around 6 hours.
OPEN: Recharge the battery power and operate the camera
TV OUT：
Connect SP1 N and TV with the TV cable to display the files on TV.
4
Basic operations：
Video Mode- Idle Recording Video Picture Mode
FUNCTIONS:
Video
Photo
Playback
POWER：
Short Press “POWER” button to turn on, and long press “POWER” button to turn off.
MODE SWITCH：
Press the “MODE” button to switch between VIDEO/PHOTO.
VIDEO/CAMERA:
Press “SHUTTER” button to begin video recording or to snap photo.
Picture in VIDEO:
Press “DOWN” button to take a photo while in video recording mode.
PLAYBACK：
Press the “OK” button to enter Playback mode to view video and image files.
DISPLAY：
When in either video or picture mode, press “UP” button to turn off LCD to save the
battery power.
RESET：
If camera shuts down and/or is unresponsive, use a tooth pick or sharp tool to insert into
“RESET” hole to restart the camera
5
Video mode：
The default setting of SP1 N is video mode. Press “Shutter” button to begin recording and
press again to stop recording.
Digital zoom：
Use the “Down” button to zoom in on the scene while selecting targets. The zoom factor
will be displayed on the LCD, and can be increased to a maximum of 4X (NOTE: resolution
drops as image is magnified)
* Zoom function cannot be used in 1080P mode.
Display in video mode：
The following icons show the various settings displayed on the LCD in idle Video mode.
6
Settings：
In the Video mode, press “MENU Button”, and use the “UP / DOWN” buttons to
select the option of the desired adjustment setting.
The following screens show the adjustable settings in the Video mode. They include
QUALITY / RESOLUTION / MOTION DETECTION / VIDEO DURATION/ LOOP
VIDEO / UPSIDE DOWN / MUTE / IMAGE EFFECT / SCENE MODE / FLICKER /
CONTRAST / SHARPNESS / ISO / WHITE BALANCE / EXPOSURE VALUE / AF
MODE.
7
1. VIDEO
*QUALITY: This option adjusts the quality of the picture between normal and super fine.
Use the “UP / DOWN” buttons to select “QUALITY”, and press “OK” button to enter into
the setting. There are SUPER FINE/FINE/NORMAL/. After selection, press “OK button” to
confirm, then press “MENU” button twice to return to main screen.
*RESOLUTION: This option adjusts the resolution of the video between 1080P, 720P,
WVGA and VGA. Use the “UP/DOWN” buttons to select “RESOLUTION”, and press
“OK” button to enter into the setting. There are 1080P30 / 720P60 / 720P30 / WVGAP60 /
WVGAP30 / VGA. After selection, press “OK” button to confirm, then press “MENU”
button twice to return to main screen.
*MOTION DETECTION: This option automatically detects motion and begins recording.
Use the “UP / DOWN” buttons to select “MOTION DETECTION”, and press “OK” button
to enter into the setting. Options are OFF and ON. After selection, press “OK” button to
confirm, then press “MENU” button twice to return to main screen.
8
*VIDEO DURATION: This option adjusts the duration of each video file recorded. Use the
“UP / DOWN” buttons to select “VIDEO DURATION”, and press “OK” button to enter the
setting. There are ANY DURATION / 3MIN / 5MIN / 10MIN / 15MIN. After selection,
press “OK button” to confirm, then press “MENU” button twice to return to main screen.
*LOOP VIDEO: This option disables or enables video files to be recorded over when the
SD card memory is full. Use the “UP / DOWN” buttons to select “LOOP VIDEO”, and press
“OK” button to enter into the setting. These are ON and OFF. After selection, press “OK
button” to confirm, then press “MENU” button twice to return to main screen.
* UPSIDE DOWN (Video Flip): In the setting list, use the “UP / DOWN” buttons to select
“upside down”, and press “OK” button to enter into the setting. Choose ON or OFF, and
press “OK” button to confirm the selection, then press “MENU” button twice to return to
main screen.
9
Loading...