In The Ditch ITD1613 Operation Manual

TM

ITD1613 Slide Out Drawer Operations Manual

ITEM# QUANTITY DESCRIPTION PART #

1 1

2 1 Slide Out Drawer Bracket ITD1614

3 1 Slide Out Tray ITD1615

4 2 Drawer Dividers ITD1616

Slide Out Drawer (Complete Assembly)

ITD1613

1

4

2

3

TM

ITD0473208-587-7960 www.intheditch.com

TM

ITD1613 Slide Out Drawer Operations Manual

DESCRIPTION QUANTITY

1/4” - 20 X 1” Carriage Bolt

( Front of Shelf )

1/4” - 20 X 3/4” Carriage Bolt

( Back of Shelf )

1/4” Nylock Nuts 4

1/4” Flat Washers 4

Install Drawer Dividers into the

1

slide out tray slots. Bend the
tab over to secure the drawer
divider into place.

2

2

Mounting Hardware Included

Place the Slide Out Tray into

2

Slide Out Drawer Bracket by
inserting the back of the
Slide Out Tray at an angle that
will clear the mounting bolt.

The front mounting bolt can also

3

be used as a stop for the Slide
Out Tray, this will allow the user
easier access to the tray.

ITD1613 Slide Out Drawer has a
20lbs. Load Limit

1/4” - 20 X 1” Carriage Bolt

1/4” - 20 X 1” Carriage Bolt