Intex Recreation Krystal Clear 604 User Manual

58

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

OOWWNNEERR’’SS MMAANNUUAALL

IMPORTANT

SAFETY RULES

Read, Understand, and Follow all

Instructions Carefully before

Installing and using this Product.

Don’t forget to try these other fine Intex products: Pools, Pool Accessories,
Inflatable Pools and In-Home Toys, Airbeds and Boats available at fine
retailers or visit our website.

For illustrative purposes only.

©2006 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten.

Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., 8th Floor, Dah Sing

Financial Centre, 108 Gloucester Road, Wanchai, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach,
CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea
por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., P.O. Box nr. 1075 – 4700 BB Roosendaal – The
Netherlands

Krystal Clear

TM

Model 604 Filter Pump

220 - 240 V~, 50 Hz, 45 W
Hmax 1.0 m, H min 0.19 m, IPX7
Max. Water Temperature 35 °C

058**-A0-0701

58

SAVE THESE INSTRUCTIONS

Page 2

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

TTAABBLLEE OOFF CCOONNTTEENNTTSS

Warnings.......................................................................... 3

Parts List & Reference.................................................... 4-5

Set Up Instructions ........................................................ 6-7

Stationary Mounting Option........................................... 8

Maintenance..................................................................... 9

Pool Care and Chemicals............................................... 10

Long Term Storage.......................................................... 10

Troubleshooting Guide................................................... 11

Common Pool Problems................................................. 12

General Aquatic Safety................................................... 13

Limited Warranty............................................................. 14

Intex Service Center Locations...................................... 15

58

SAVE THESE INSTRUCTIONS

Page 3

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

SSAAFFEETTYY RRUULLEESS

WARNING

• To reduce the risk of injury, do not permit children to use this product. Always
supervise children and those with disabilities.

• Risk of electric shock. Connect this product only to a grounding type receptacle
protected by a ground-fault circuit interrupter (GFCI) or residual current device
(RCD). Contact a qualified electrician if you cannot verify that the receptacle is
protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD,
which has a maximum rate of 30mA. Do not use a portable residual current device
(PRCD).

• Do not bury electrical cord. Locate cord where it will not be damaged by lawn
mowers, hedge trimmers, and other equipment.

• The supply cord cannot be replaced. If the cord is damaged the appliance should
be scrapped.

• To reduce the risk of electric shock, do not use extension cords, timers, plug
adaptors or converter plugs to connect unit to electric supply; provide a properly
located outlet.

• Assembly and disassembly by adults only.

• Do not attempt to plug in or unplug this product while standing in water or when
your hands are wet.

• Position this product away from pool to prevent a child from climbing on pump to
access the pool.

• Children must stay away from this product and electrical cord(s).

• Do not operate this product when pool is occupied.

• Always unplug this product from the electrical outlet before removing, cleaning,
servicing or making any adjustment to the product.

• This product is for use with storable pools only. Do not use with permanently
installed pools. A storable pool is constructed so that it may be readily
disassembled for storage and reassembled to its original configuration.

• Keep this product more than 2m away from the pool. (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• The plug shall be accessible after product installed.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN
PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR
OTHER SERIOUS INJURY OR DEATH

.

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

These product warnings, instructions and safety rules provided with the product represent
some common risks of water recreation devices and do not cover all instances of risk and
danger. Please use common sense and good judgement when enjoying any water activity.

58

SAVE THESE INSTRUCTIONS

Page 4

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

PPAARRTTSS LLIISSTT

1

9

4526

PARTS LIST

3

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

87

58

SAVE THESE INSTRUCTIONS

Page 5

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

PPAARRTTSS RREEFFEERREENNCCEE

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

When ordering parts, be sure to quote the model number and part numbers.

1

2

3

4

5

6

7

8

9

REF. NO.

DESCRIPTION

QTY.

SPARE PART NO.

1

1

1

1

1

2

2

4

2

AIR RELEASE VALVE

VALVE O-RING

THREADED COVER

COVER SEAL

FILTER CARTRIDGE (59900)

STRAINER

HOSE

HOSE CLAMP

HOSE SEAL

10460

10264

10459

10325

10120

10399

10122

10134

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

7

6

8

9

1

2

3

4

5

58

SAVE THESE INSTRUCTIONS

Page 6

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

SSEETT--UUPP IINNSSTTRRUUCCTTIIOONNSS

SET-UP INSTRUCTIONS

Be sure you have access to water to fill the pool and chemicals for the water. A
small coin can be used to tighten the hose clamps (8).

IMPORTANT: This filter pump is shipped with the air release valve (1) open
(open the air release valve if necessary). DO NOT replace the air release valve
until you reach STEP #8. Failure to follow these instructions will result in air
trapped inside filter housing; the motor will run dry, be noisy and
malfunction.

1. Assemble above-ground-pool first. Carefully follow the pool’s installation

instructions.

2. Place the Filter-Pump the length of the hose away from the pool wall where the

lower black protruding hose connection is "sticking-out".

3. Remove wall plugs and then insert the strainers (6) into each of the protruding
hose connections. The hoses (7) fit over the strainers inserted into the
connections.

4. There are two hoses to be connected to the Filter-Pump hose connections.
With hose clamps (8), fasten one of the hoses (7) to the lower protruding hose
connection (marked "+" on the pool liner) and to the pump connection (marked
"+").

5. Connect the second hose to the remaining upper protruding hose connection
and to the lower pump connection. Make sure all the hose clamps (8) are tight.

6. Twist the Filter-Pump’s threaded cover (3) in a clock-wise direction to be sure it
is on "tight". Use only your hands to tighten the top. Do not tighten with tools
such as pliers.

7. Fill the pool to a level of at least 1-2 inches above the top connection. The
water will automatically flow down into the pump.

8. When water starts flowing out of the air release valve hole, screw in the air
release valve back into the filter housing cover. Do not over tighten the valve.

NOTE: Venting the system is necessary for air to escape as the filter
housing fills with water.

9. Connect the filter pump to the power outlet. The filter pump is now filtering the

water.

10. Operate the filter pump until the desired water clarity is obtained.

WARNING

Risk of electric shock. Connect this product only to a grounding
type receptacle protected by a ground-fault circuit interrupter
(GFCI) or residual current device (RCD). Contact a qualified
electrician if you cannot verify that the receptacle is protected by a
GFCI/RCD. Use a qualified electrician to install the GFCI/RCD,
which has a maximum rate of 30mA. Do not use a portable residual
current device (PRCD).

58

SAVE THESE INSTRUCTIONS

Page 7

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

SSEETT--UUPP IINNSSTTRRUUCCTTIIOONNSS

SET-UP INSTRUCTIONS (continued)

WARNING

Position this product away from pool to prevent a child from
climbing the pool.

To inspect and change the filter cartridge, disconnect line cord, unscrew the
strainer grids (6) from the strainer connectors and insert the hat-like plugs into the
strainer connectors before servicing the filter. After service, open the air release
valve, remove the plugs, allow any air to escape through the valve before tightening
the valve again and replace the strainer grids. The pump is now primed with water
again and may be turned on.

(ILLUSTRATION NOT TO SCALE)

WATER LEVEL

HOSE

CLAMP

INSIDE OF POOL

STRAINER

PLUG

UPPER PROTRUDING

HOSE CONNECTION

W

A

T

E

R

D

I

R

E

C

T

I

O

N

W

A

T

E

R

D

I

R

E

C

T

I

O

N

UPPER PUMP
CONNECTION

BOTTOM PUMP

CONNECTION

THREADED

COVER

FILTER

CARTRIDGE

INSIDE

AIR RELEASE

VALVE

HOSE

58

SAVE THESE INSTRUCTIONS

Page 8

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

SSTTAATTIIOONNAARRYY MMOOUUNNTTIINNGG OOPPTTIIOONN

FILTER PUMP STATIONARY MOUNTING OPTION

-- (3) x M6 HEXAGON HEAD BOLTS

-- (3) x M6 HEXAGON LOCK-NUTS

135mm

135mm

135mm

135mm

135mm

135mm

There are three mounting holes located at the bottom of the filter-pump base.
These holes are provided because various country’s regulations, especially in the
European community, require the filter-pump to be secured to the ground or to a
base in a permanent upright position.
These three holes form a triangle pattern and are 135mm from each other. The
holes are slotted with a 7mm width.
The filter-pump can be mounted on a cement base or onto a wooden structure to
prevent accidental falling over. Total assembly must exceed 18kg. The drawings on
the following show two possible ways of upright mounting. The European norm
EN 60335-2-41 requires this product be secured to the ground or to a base.

58

SAVE THESE INSTRUCTIONS

Page 9

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

MMAAIINNTTEENNAANNCCEE

It is recommended that the filter cartridge be replaced at least
every 2 weeks.

1. Make sure filter pump is not operating. Disconnect line cord.

2. To prevent water from escaping the pool, unscrew the strainer grids from the

strainer connectors and insert the hat-like plugs into the strainer connectors.

3. In a counter-clockwise motion, remove threaded cover (3) and cover seal (4).

Be careful not to lose the cover seal (4).

4. Remove filter cartridge (5) to clean it. The filter may be cleaned from the spray

from a water hose.

5. Use judgement as to whether cartridge needs to be replaced.

6. Return cartridge to filtering position.

7. Return the seal (4) and threaded cover (3) to their original positions. Tighten

the threaded cover (3) by hand only, twisting it in a clock-wise direction.

8. After service, open the air release valve, remove the plugs, allow any air to

escape through the valve before tightening the valve again and replace the

strainer grids. The pump is now primed with water again and may be turned on.

FILTER CARTRIDGE CLEANING OR REPLACEMENT

58

SAVE THESE INSTRUCTIONS

Page 10

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

PPOOOOLL MMAAIINNTTEENNAANNCCEE

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always
follow the chemical manufacturer’s directions, and the health and hazard
warnings.

1. Before emptying your pool for long term storage, or relocation, be sure the

water is directed towards an acceptable drain water receptacle away from the
house. Check local regulations for specific directions regarding disposal of
swimming pool water.

2. After pool is empty of all water, disconnect all pool hoses (7) from pool and
filter pump, simply reverse the set up instructions.

3. Remove filter cartridge as shown in the Filter Cartridge Cleaning section,
steps 2 thru 4.

4. Remove the strainers (6) from the pool wall. Place the wall plugs into the hose
connections. Loosen clamps (8) securing the strainers before removal.

5. Drain water from the filter pump housing.

6. Depending on the cartridge (5) usage, a new cartridge may be needed for next

season, keep a spare available.

7. Cover the seal (4), air release valve O-ring (2) and hose seals (9) with
petroleum jelly to preserve its resilience during storage.

8. Store the filter pump and accessories in a dry, cool storage location.

9. The original packing carton can be used for storage.

POOL CARE AND CHEMICALS

• All pools require care to keep the water clear and hygienically clean. With
proper chemical control, your filter will help attain this objective. Consult your
pool supply dealer for instructions regarding the proper use of chlorine,
algaecide and other chemical agents required for sparkling clear water.

• Keep pool chemicals away from children.

• Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations
could occur.

• Daily pH checking and chemical treatment of the water is very important and
can not be overemphasized. Chlorine, algaecide and maintenance of proper pH
levels are required when filling the pool as well as during the season. Consult
your local swimming pool supply store for instructions.

• The season's first filling of the pool may have brackish water requiring extra
water additives and extra filter changes. Do not allow swimming in pool until the
pH level is balanced. Consult your local swimming pool supply store for
instructions.

• Keep spare filter cartridges on hand. Replace cartridges every two weeks.

• Chlorinated water may damage lawns, gardens or shrubbery as children play
in the pool and splash water outside the pool. Lawn areas underneath the
pool liner will be destroyed. Note that some types of grass may grow through
the liner but function is not affected.

• Filter run time depends on pool size, weather and usage level. Experiment with
various run times so as to produce clean clear water.

LONG TERM STORAGE

58

SAVE THESE INSTRUCTIONS

Page 11

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

TROUBLESHOOTING GUIDE

TTRROOUUBBLLEESSHHOOOOTTIINNGG GGUUIIDDEE

FILTER MOTOR
FAILS TO START

FILTER DOESN’T
CLEAN POOL

FILTER DOESN’T
PUMP WATER OR
FLOW IS VERY
SLOW

PUMP DOESN’T
WORK

TOP COVER
LEAKING

HOSE LEAKING

AIR LOCK

• Not plugged in.

• Fuse box needs checking.

• GFCI/RCD circuit breaker
tripped.

• Improper chlorine or pH
levels.

• Filter cartridge dirty.

• Cartridge damaged.

• Excessively dirty pool.

• Strainer screen restricting
flow.

• Inlet/discharge clogged.

• Air leak on intake line.

• Scale or buildup on cartridge.

• Excessively dirty pool.

• Filter cartridge dirty.

• Low water level.

• Strainer screen plugged up.

• Air leak on intake hose.

• Faulty motor or impeller
jammed.

• Air lock inside cartridge
chamber.

• O-ring missing.

• Cover not tight.

• Filter cartridge dirty.

• Hose clamps.

• Pump housing and inlet hose
air trapped.

TROUBLE CHECK POSSIBLE SOLUTIONS

•

Filter cord must be plugged into a 3 wire
outlet that is protected by a Class A
Ground Fault Circuit Interrupter, or RCD.

• Reset circuit breaker. If circuit breaker
trips repeatedly, your electrical system
may have a defect. Turn off circuit
breaker and call an electrician to
correct the problem.

• Motor too hot and overload protection
shut motor off. Let motor cool down.

•

Adjust chlorine and pH level. Consult
your local swimming pool supply stores.

• Clean or replace cartridge.

• Check for holes in cartridge. Replace
if damaged.

• Operate filter for longer periods.

• Clean strainer screen at pool wall inlet.

• Look for obstructions in intake hose or
discharge hose inside pool wall.

• Tighten hose clamps, check hoses for
damage, check pool water level.

• Replace cartridge.

• Clean cartridge more often.

• Fill pool to correct water level.

• Clean strainer screens at pool inlet.

• Tighten hose clamps, check hose for
damage.

• Check & clear any sticks or leaves in
intake to pump.

• Open release valve at top of pump.

• Remove cover & check for O-ring.

• Tighten cover (Manually).

• Replace or clean cartridge.

• Tighten/change hose clamps.

• Open air release valve, lift and lower
the inlet hose until water starts to flow
out of the air release valve, close air
release valve.

• To facilitate the connection of the hoses into the black protruding hose connectors on
the liner, you may use soapy water solution (mix 6 drops of dish washing liquid in 1/2 a
cup of water) to lubricate the hoses and the black protruding hose connectors. Continue
per owner's manual.

• Do not use lubricants such as machine or industrial oil or grease.

58

SAVE THESE INSTRUCTIONS

Page 12

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

COMMON POOL PROBLEMS

CCOOMMMMOONN PPRROOBBLLEEMMSS

PROBLEM DESCRIPTION CAUSE REMEDY

ALGAE

COLORED
WATER

SUSPENDED
MATTER IN
WATER

CHRONIC
LOW WATER
LEVEL

SEDIMENT
ON POOL
BOTTOM

SURFACE
DEBRIS

• Chlorine and pH levels
need adjustment.

• Copper, iron or
maganese in water
being oxidized by the
added chlorine.
Common.

• "Hard water" caused
by pH level being too
high.

• Chlorine content is low.

• Foreign matter in
water.

• Rip or hole in pool
liner or hoses. Tighten
caps.

• Heavy use, getting in
and out of pool.

• Pool too close to
trees.

• Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended
level.

• Vacuum pool bottom.

• Maintain proper chlorine
level.

• Adjust pH to recommended
level.

• Run filter until water is clear.

• Clean cartridge frequently.

• Correct pH. Check with pool
dealer for water treatment.

• Check for proper chlorine
level.

• Clean or replace your filter.

• Repair with patch kit.

• Finger tighten all caps.

• Use Intex pool vacuum to
clean bottom of pool.

• Use Intex pool skimmer.

• Greenish water.

• Green or black
spots on pool liner.

• Pool liner is
slippery and/or has
a bad odor.

• Water turns blue,
brown, or black
when first treated
with chlorine.

• Water is cloudy or
milky.

• Level is lower than
on previous day.

• Dirt or sand on
pool floor.

• Leaves, insects
etc.

IMPORTANT

If you continue to experience difficulty, please contact our
Consumer Service Department for assistance. See back cover for
contact information.

58

SAVE THESE INSTRUCTIONS

Page 13

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

SSAAFFEETTYY GGUUIIDDEELLIINNEESS

GENERAL AQUATIC SAFETY

Water recreation is both fun and therapeutic. However, it involves
inherent risks of injury and death. To reduce your risk of injury, read
and follow all product, package and package insert warnings and
instructions. Remember, however, that product warnings, instructions
and safety guidelines cover some common risks of water recreation,
but do not cover all instances or risk and or danger.

For additional safeguards, also familiarize yourself with the following
general guidelines as well as guidelines provided by nationally
recognized Safety Organizations:

• Demand constant supervision.

• Learn to swim.

• Take the time to learn CPR and first aid.

• Instruct anyone who is watching your children about potential pool
hazards and about the use of protective devices such as locked doors,
barriers, etc.

• Teach children what to do in case of an emergency.

• Always use common sense and good judgement when enjoying any
water activity.

• Supervise, Supervise, Supervise.

58

SAVE THESE INSTRUCTIONS

Page 14

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

PARTS LIST

Your Krystal Clear™ Filter-Pump has been manufactured using the highest quality
materials and workmanship. All Intex products have been inspected and found free of
defects prior to leaving the factory. This Limited Warranty applies only to the Krystal
Clear™ Filter-Pump.

The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for a period of one (1) year from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of
purchase will be required and must accompany warranty claims or the Limited Warranty is
invalid.

If a manufacturing defect is found within this one (1) year period, please contact the
appropriate Intex Service Center listed in this manual. The Service Center will determine
the validity of the claim.

IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY AND IN
NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR EMPLOYEES BE LIABLE
TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL
DAMAGES OR LIABILITIES.

This Limited Warranty does not apply if the Krystal Clear™ Filter-Pump is subject to
negligence, abnormal use or operation, accident, improper operation, improper voltage or
current contrary to operating instructions, or to damage by circumstances beyond Intex’s
control, including but not limited to, ordinary wear and tear and damage caused by
exposure to fire, flood, freezing, rain, or other external environmental forces. This Limited
Warranty applies only to those parts and components sold by Intex. The Limited Warranty
does not cover unauthorized alterations, repairs or disassembly by anyone other than Intex
Service Center personnel.

The costs associated with the loss of pool water, chemicals or water damage are not
covered by this warranty. Injury or damage to any property or person is not covered by this
warranty.

LIMITED WARRANTY

58

SAVE THESE INSTRUCTIONS

Page 15

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

• CHILE / ARGENTINA / COMEXA S.A
PERU / URUGUAY SAN IGNACIO 0201, PARQUE

INDUSTRIAL PORTEZUELO,
QUILICURA, SANTIAGO, CHILE
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• SAUDI ARABIA SAUDI ARABIAN MARKETING &

AGENCIES CO. LTD.
PRINCE AMIR MAJED STREET,
AL-SAFA DISTRICT. JEDDAH,
KINGDOM OF SAUDI ARABIA
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.samaco.com.sa

• AUSTRIA STEINBACH GMBH AUSTRIA

AISTINGERSTRAßE 2
4311 SCHWERTBERG
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexcorp.at

• CZECH REPUBLIC / INTEX TRADING S.R.O.
EASTERN EUROPE BENESOVSKA 23,

101 00 PRAHA 10
CZECH REPUBLIC
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• BELGIUM N.V. NICOTOY S.A.

MOESKROENSESTEENWEG 383 C,
8511 AALBEKE
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• DENMARK K.E. MATHIASEN A/S

SINTRUPVEJ 12
DK-8220 BRABRAND
DENMARK
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• SWEDEN LEKSAM AB

BRANDSVIGSGATAN 6,
S-262 73 ÄNGELHOLM,
SWEDEN
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• NORWAY NORSTAR AS

PINDSLEVEIEN 1
N-3221 SANDEFJORD
NORWAY
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• FINLAND NORSTAR OY

RUUKINTIE 20
FIN-02330 ESPOO
FINLAND
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• RUSSIA LLC BAUER

KIEVSKAYA STR., 20,
121165 MOSCOW, RUSSIA
TEL: [phone]/9802
FAX: [phone]
E-mail: [e-mail]
Website: www.intex.su

• POLAND KATHAY HASTER

UL. LUTYCKA 3,
60-415 POZNAN
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• HUNGARY RECONTRA LTD.

H-1113 BUDAPEST, DARÓCZI ÚT 1-3,
HUNGARY
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• BRAZIL KONESUL MARKETING & SALES LTDA

RUA INÁCIO BORBA, 835 - CEP. 04715-020,
CHÁCARA SANTO ANTONIO - SÃO
PAULO - SP - BRASIL
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• ASIA INTEX DEVELOPMENT CO. LTD.
8TH FLOOR,
DAH SING FINANCIAL CENTRE,
108 GLOUCESTER ROAD,
WANCHAI, HONG KONG
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexdevelopment.com

• EUROPE INTEX TRADING B.V.
POSTBUS 1075, 4700 BB ROOSENDAAL,
THE NETHERLANDS
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexcorp.nl

• FRANCE INTEX SERVICE (FRANCE) SAS
52, ROUTE NATIONALE
39190 BEAUFORT, FRANCE
TEL: [phone] (0.15 TTC/min)
FAX: [phone]
E-mail: [e-mail]
Website: www.intex.fr

• GERMANY STEINBACH GMBH GERMANY
AN DER WELLE 4
60322 FRANKFURT
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexcorp.de

• ITALY A & A MARKETING SERVICE
OFFICE: VIA DEI MESTIERI 8, 20049
CONCOREZZO, MILANO - ITALY
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexitalia.com
WAREHOUSE: C/O ALVI, VIALE DELLA
REPUBBLICA 10 - 27100 PAVIA- ITALY

• UK TOY BROKERS LTD
MARKETING HOUSE,
BLACKSTONE ROAD
HUNTINGDON, CAMBS.
PE29 6EF. UK
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.toybrokers.com

• SWITZERLAND GWM AGENCY
GARTEN-U. WOHNMÖBEL
RÄFFELSTRASSE 25
POSTFACH
CH-8045 ZURICH/SWITZERLAND
TEL: + 41 - (0)900 - 455 456
FAX: [phone]
E-mail: [e-mail]
Website: www.gwm.ch

• SPAIN / PORTUGAL KOKIDO BVI LIMITED
C/PLOMO 5-7, NAVE 19 POLÍGONO
INDUSTRIAL AIMAYR SAN MARTÍN DE
LA VEGA 28330 MADRID SPAIN
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
E-mail: [e-mail]

• AUSTRALIA HUNTER OVERSEAS PTY LTD
LEVEL 1, 225 BAY STREET,
BRIGHTON, VICTORIA
AUSTRALIA
TEL: [phone] or 1800-224-094
FAX: [phone]
E-mail: [e-mail]

• NEW ZEALAND HAKA NEW ZEALAND LIMITED
UNIT 5, SENTINEL PARK,
25 AIRBORNE ROAD, ALBANY
PO BOX 302171,
NORTH HARBOUR,
AUCKLAND 1330
NEW ZEALAND
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• MIDDLE EAST FIRST GROUP TRADING

REGION AL MOOSA GROUP BUILDING, 1ST

FLOOR, OFFICE 102 & 103, UMM HURAIR
ROAD, KARAMA, DUBAI, UAE
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.firstgrouptrading.com

• SOUTH AFRICA WOOD & HYDE
15-17 PACKER AVENUE, INDUSTRIA2,
CAPE TOWN, SOUTH AFRICA 7460
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

AREAS LOCATION AREAS LOCATION

For service questions or to order replacement parts, please contact the appropriate office
listed below or visit www.intexdevelopment.com for answers to most frequently asked
questions.