(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 04/19/2013
(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 04/19/2013
English
IMPORTANT
SAFETY RULES
Read, Understand, and Follow
all Instructions Carefully before
Installing and using this Product.
Pool Volleyball Set
for Intex® Round Metal
Frame Pools
For illustrative purposes only.
Don’t forget to try these other fine Intex products: Pools, Pool
Accessories, Inflatable Pools and In-Home Toys, Airbeds and Boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifications and appearance, which may result
in updates to the instruction manual, without notice.
OWNER’S MANUAL
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
IMPORTANT!
www.intexcorp.com
Monday through Friday, 8:30am to 5:00pm Pacific Time
1-800-234-6 839
051-*PO-R0-1404
51PO
English
TABLE OF CONTENTS
Warnings....................................................................... 2
Parts Reference............................................................ 3
Setup Instructions........................................................ 3-4
IMPORTANT
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
SAFETY RULES
WARNING
• POOL AND POOL ACCESSORIES ARE TO BE ASSEMBLED
AND DISASSEMBLED BY ADULTS ONLY.
• USE ONLY UNDER COMPETENT SUPERVISION.
• WHEN NOT IN USE REMOVE FROM THE POOL AND STORE
IN A SAFE PLACE INDOORS.
• DO NOT USE DURING WINDY AND GUSTY DAYS.
• FOLLOW THESE RULES TO AVOID SERIOUS INJURY OR
PROPERTY DAMAGE.
• USE ONLY MANUFACTURER SUPPLIED BALLS.
PROFESSIONAL ATHLETIC BALLS ARE NOT RECOMMENDED.
• YOU MUST FIRST SET UP AND FILL THE POOL WITH WATER
FOLLOWING THE POOL OWNER'S MANUAL BEFORE
INSTALLING.
• DO NOT CLIMB, HANG, PULL, PUSH OR GRAB ANY PART OF
THE STRUCTURE. THE STRUCTURE IS NOT DESIGNED TO
SUPPORT USER BODY WEIGHT.
• REMOVE THE STRUCTURE BEFORE PLACING A POOL
COVER OVER THE POOL.
ALWAYS FOLLOW ALL SAFETY RULES. CARELESSNESS, OR
LACK OF ATTENTION, CAN HAVE SERIOUS CONSEQUENCES,
SUCH AS PARALYSIS OR OTHER PERMANENT INJURIES.
S AVE THESE INSTRUCTIONS
Page 2
51PO
(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 04/19/2013
(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 04/19/2013
English
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
7
6
REF. NO. DESCRIPTION QTY. SPARE PARTS NO.
1 LONG PIN (WITH 2 EXTRA) 6 10312
2 X-LONG PIN (WITH 2 EXTRA) 6 11504
3 DOVETAIL SCREW 4 10907
4 RUBBER FENDER 4 10537
5
POLE BRACKET (DOVETAIL SCREWS & RUBBER FENDERS INCLUDED)2 11503
6 POLE 2 11173
7 VOLLEYBALL POLE END PLUG 2 10539
8 VOLLEYBALL NET FASTENER 4 10535
VOLLEYBALL NET (FOR 16' (488 CM) & BELOW AGP) OR
9
VOLLEYBALL NET (FOR 17' (518 CM) & ABOVE AGP)
VOLLEYBALL 1 10541
10
and become familiar with all the parts.
9
1
2
8
4
3
5
1 10867
1 10540
POOL VOLLEYBALL SET UP
51PO
English
POOL VOLLEYBALL SET UP (continued)
2. Secure the pole bracket (5) with two
X-long pins (2) and tighten the two
dovetail screws back using your
fingers only. NOTE: Do not over
tighten or use tool such as pliers.
3. Insert the assembled volleyball pole
into the pole bracket (5). Secure the
pole to the bracket with long pins (1).
4. Attach two volleyball net fasteners (8)
to the volleyball pole. Ensure the
volleyball net fasteners (8) are facing
outward.
5. Locate the opposite “T JOINT” of the
circular metal frame pool and attach
the second pole bracket (5) to the “T
JOINT”, repeat steps #1 to #4.
2
3
2
1
5
2
6
8
6
8
51PO
2
1
3
1
4
5
IMPORTANT: Before proceeding to the next step ensure the pool is fully set up
and filled with water following the pool owner's manual.
1. Fully open the two dovetail screws (3)
and attach a pole bracket (5) to a
circular metal frame pool "T JOINT".
1
2
Frame pool
“T” joint
1
Make sure the pole bracket (5) is
securely attached to the "T JOINT".
3
5
3
S AVE THESE INSTRUCTIONS
Page 3
6. Attach one side of the Volleyball
Net (9) starting from the top
Volleyball Net Fastener (8) and then
the bottom fastener. Loop the rope
around the fastener (8) several
1
times and secure the end of the
rope to the two notches in the
8
fastener. NOTE: Adjust the length of
the rope to be looped around the
fasteners depend ing on the size of
the pool. Repeat this procedure
for the other pole.
S AVE THESE INSTRUCTIONS
6
2
Page 4