Intex SL503 Owner's Manual

309

IO

(309IO) MULTI-COLORED BATTERY OPERATED LED LIGHT FOR INTEX® BUBBLE SPA ENGLISH 7.25” X 4.875” 08/23/2016

SAVE THESE INSTRUCTIONS

• For adult use only. This product is not a toy, keep away from children.

• Do not stare directly at the light emitted by this product.

• Do not replace the batteries while in the pool or spa.

• Do not sit, straddle, or step on the product.

• Do not dispose of batteries in regular trash, municipal waste stream or by fire as battery may leak or explode.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID INJURY OR PROPERTY DAMAGE.

Page 1

INTEX® OWNER'S MANUAL

MULTI-COLORED BATTERY OPERATED LED LIGHT FOR INTEX® BUBBLE SPA

Model SL503

General information:

• This product operates on three (3) AAA size batteries (not included).

• Alkaline batteries are recommended. Rechargeable batteries are okay to use.

• Remove batteries if light is not to be used for an extended period of time.

• Do not mix old and new batteries. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel - Cadmium) batteries.

• Dry any water on the product prior to battery installation. Remove used batteries promptly. Replace all 3 batteries at the same time.

• Always purchase the correct size and grade of battery most suitable for the intended use. Ensure batteries are installed correctly with
regard to polarity (+ and -). Clean the battery contacts and also those of the device prior to battery installation.

• To clean the product, use only a damp cloth. Avoid strong cleaner, excessive water and abrasive brush.

309-*IO-R0-1708

WARNING

©2016 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an

Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

•

Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com

309

IO

(309IO) MULTI-COLORED BATTERY OPERATED LED LIGHT FOR INTEX® BUBBLE SPA ENGLISH 7.25” X 4.875” 08/23/2016

SAVE THESE INSTRUCTIONS

Page 2

Parts reference:

REF. NO. DESCRIPTION QTY.

SPARE PART NO.

1

BATTERY HOUSING COVER WITH O-RINGS

1

12409

2

BATTERY HOLDER

1 12410

3

SPA LED LIGHT

1 12411

To install or replace batteries:

1. Dry product completely. Unscrew the battery housing
cover

(1)

from the Spa LED light (see Fig 1). Be careful

not to lose the two o-rings on the battery housing cover.

2. Insert 3 AAA size batteries following the orientation shown
on the battery holder

(2)

(see Fig 2).

Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which
may result in updates to the instruction manual without notice.

Fig 2

1

2

3

Fig 4

Fig 3

3. Reinstall the battery holder

(2)

into the LED light body according to the orientation (see Fig 3).

4. Securely tighten the battery housing cover

(1)

by hand only (see Fig 4).

Fig 1

O-rings