Intex SF60220RC, SF80220RC, SF70220RC Owner's Manual

195

GS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Model SF80220RC 6 m

3

Model SF70220RC 8 m

3

Model SF60220RC 10 m

3

IMPORTANT

SAFETY RULES

Read, understand, and follow

all instructions carefully before

installing and using this product.

Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website. Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual without notice.

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

For illustrative purposes only.

OWNER’S MANUAL

195-*GS-R0-1507

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 2

Warnings.......................................................................... 3

Parts References............................................................. 4-5

Setup Instructions ......................................................... 6-13

Product Specifications................................................... 8

Operating Instructions ................................................... 14-16

Intex Pools Operating Time Table.................................. 17

Non-Intex Pools Operating Time Table.......................... 18

Maintenance.................................................................... 19

Long Term Storage.......................................................... 20

Troubleshooting Guide................................................... 21

Common Pool Problems................................................. 22

General Aquatic Safety................................................... 22

Limited Warranty............................................................. 23

TABLE OF CONTENTS

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

• To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen

sory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Assembly and disassembly by adults only. Cleaning and user maintenance must be performed by an adult above 18 years old who is familiar with the risk of electric shock.

• Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the

• receptacle is protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maxi

-

mum rate of 30mA.

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjust

-

ment to the product.

• Always unplug the appliance on raining days or if leave it for long time (such as going out for holidays)

• The plug must be accessible after produc t is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to con

-

nect unit to electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Keep this product more than 3.5m away from the pool.

• Keep the plug of this product more than 4m away from the pool and at a height of 1.2m at least.

• Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.

• Do not operate this product when pool is occupied.

• This product is for use with storable pools only. Do not use with permanently installed pools. A storable pool is constructed so that it may be readily disassembled for storage and reassembled to its original configuration.

• To reduce the risk of entrapment hazard, never enter the pool if suction strainer component is loose, broken, cracked, damaged or missing. Replace loose, broken, damaged, cracked or missing suction strainer components immediately.

• Never play or swim near suction fittings. Your body or hair may be trapped causing permanent injury or drowning.

• To prevent equipment damage and risk of injury, always turn pump off before changing the filter control valve position.

• Never operate this product above the maximum working pressure stated on the filter tank.

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve cover to blow off and cause serious injury, property damage or death.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

These product warnings, instructions and safety rules provided with the product represent some common risks of water recreation devices and do not cover all instances of risk and danger. Please use common sense and good judgement when enjoying any water activity.

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 4

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

" * ": Optional.

1

5

9

11

2

13

35

20

32

33

34

19

3

6

7

4

12

15

16

17

18

8

10

14

36

37

38

19

20

22

21

23 24

25

26

27

22

23 28

29

30

21

23 24

21

22

25

26

23 28

21

22

29

31

*

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 5

REF. NO. DESCRIPTION QTY.

SPARE PART NO.

SF80220RC SF70220RC SF60220RC

1 PRESSURE GAUGE 1 11411 11224 11224

2 6-WAY VALVE 1 11378 11496 11496

3 DRAIN OUTLET COVER 1 11131 11131 11131

4 CLAMP 1 11380 11380 11380

5 TANK O-RING 1 11379 11379 11379

6 SAND SHIELD 1 11382 11382 11382

7 CENTER PIPE HUB 1 11815 11813 11814

8 LATERAL 10 11484 11384 11384

9 DRAIN VALVE CAP 1 11456 11456 11456

10 DRAIN VALVE O-RING 1 11385 11385 11385

11 L-SHAPE O-RING 4 11228 11228 11228

12 HOSE WITH NUTS 2 11769 11769 11769

13 SAND FILTER INTERCONNECTING HOSE 1 11820 11388 11535

14 LEAF TRAP NUT 1 11822 11479 11479

15 LEAF TRAP O-RING 1 11824 11232 11232

16 BASKET 1 11821 11260 11260

17 FILTER HOUSING NUT 1 11261 11261 11261

18 L-SHAPE O-RING 1 11412 11412 11412

19

AIR RELEASE VALVE / SEDIMENT RELEASE VALVE

2 10460 10460 10460

20 VALVE O-RING 2 10264 10264 10264

21*

PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)

2 10747 10747 10747

22*

HOSE O-RING

2 10262 10262 10262

23*

STEP WASHER

2 10745 10745 10745

24*

STRAINER NUT

2 10256 10256 10256

25*

FLAT STRAINER RUBBER WASHER

2 10255 10255 10255

26*

THREADED STRAINER CONNECTOR

2 11235 11235 11235

27*

ADJUSTABLE POOL INLET NOZZLE

1 11074 11074 11074

28*

ADAPTOR B

2 10722 10722 10722

29

*

STRAINER CONNECTOR

2 11070 11070 11070

30

*

POOL INLET NOZZLE

1 11071 11071 11071

31

*

STRAINER GRID

1 11072 11072 11072

32

SCREW

2 11381 11381 11381

33

PUMP MOTOR & CONTROL

1 11818GS 11806GS 11808GS

34

PRE-FILTER ASSEMBLY

1 11826 11371 11371

35 LEAF TRAP COVER 1 11823 11480 11480

36 SAND FILTER PUMP MOTOR INLET

O-RING 2 11457 11457 11457

37 SAND FILTER PUMP TANK 1 11804 11802 11803

38 SAND FILTER PUMP TANK BASE 1 11816 11800 11801

" * ": Optional. When ordering parts, be sure to quote the model number and part numbers.

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 6

The strainer grid prevents large objects from jamming and/or damaging the filter pump. If your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring. The part numbers here onward refer to the parts depicted in the Parts List section of this manual. To install, do the following:

1. In a counter-clockwise motion unscrew

plunger valve union from the threaded strainer connector (26) (see drawing 1). Be careful not to lose the step rubber washer (23). Place the plunger valve on the ground in a safe place.

2. In a counter-clockwise motion unscrew the strainer nut (24) from the threaded connector (26). Leave the flat washer (25) on the connector (26).

3. Install the strainer and plunger valve at the lower position of pool outlet (marked "+"). From the inside of the pool liner insert the connector (26) into one of the pre-cut holes with the washer remaining on the connector to be placed against the inside of the liner wall.

4. Before assembly, lubricate the threads with a petroleum jelly. With the flat side of the strainer nut (24) facing the outside wall of the liner in a clockwise motion screw the strainer nut (24) back onto the threaded connector (26) (see drawing 2).

5. Finger tighten the strainer nut (24) onto the threaded connector (26).

6. Grasp the plunger valve assembly. Make sure the step washer (23) is in place.

7. In a clockwise motion screw the plunger valve union back onto the threaded connector (26) (see drawing 3).

8. In a clockwise motion turn the plunger valve handle to close position. Ensure the plunger valve is securely closed. This will prevent water from flowing out during filling of the pool (see drawing 4).

POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional)

2

25

26

INSIDE

LINER WALL

24

1

23

2

1

3

1

2

4

INSIDE

LINER WALL

195

GS

SAVE THESE INSTRUCTIONS

(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014

English

Page 7

POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional)

1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (26) (see drawing 5). Be careful not to lose the step rubber washer (23). Place the plunger valve on the ground in a safe place.

2. In a counter-clockwise motion unscrew the strainer nut (24) from the threaded connector (26). Leave the flat washer (25) on the connector (26).

3. Install the nozzle and plunger valve at the upper position of pool inlet. From the inside of the pool liner insert the connector (26) into one of the pre-cut holes with the washer remaining on the connector to be placed against the inside of the liner wall.

4. Before assembly, lubricate the threads with a petroleum jelly. With the flat side of the strainer nut (24) facing the outside wall of the liner in a clockwise motion screw the strainer nut (24) back onto the threaded connector (26) (see drawing 6).

5. Finger tighten the adjustable pool inlet nozzle (27) and the strainer nut (24) onto the threaded connector (26).

6. Grasp the plunger valve assembly. Make sure the step washer (23) is in place.

7. In a clockwise motion screw the plunger valve union back onto the threaded connector (26) (see drawing 7).

8. In a clockwise motion turn the plunger valve handle to close position. Ensure the plunger valve is securely closed. This will prevent water from flowing out during filling of the pool (see drawing 8).

9. Adjust the direction of nozzle head pointing away from the pool outlet for a better circulation result (see drawing 9).

10. The pool liner is now ready to fill with water. Consult the above-ground-pool owner’s manual for filling instructions.

5

9

2

1

7

1

2

8

INSIDE

LINER WALL

6

25 26 27

INSIDE

LINER WALL

24

WATER

FLOW

Pool

Intex SF60220RC, SF80220RC, SF70220RC Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual