Intex CHALLENGER 3a, CHALLENGER 4a, SEAHAWK 2, SEAHAWK 3, SEAHAWK 4 Owner's Manual
...
98A
(
98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 10/07/2011
SAVE THESE INSTRUCTIONS
Page 1
098-*A*-R1-1210
INTEX®OWNER’S MANUAL
INFLATABLE BOAT
IMPORTANT
THIS BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
READ IT THOROUGHLY BEFORE USING THIS PRODUCT AND
KEEP IT FOR FUTURE REFERENCE.
ISO-6185 BOAT DESIGN CATEGORY D
98A
(
98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 10/07/2011
SAVE THESE INSTRUCTIONS
Page 2
TABLE OF CONTENTS
INTRODUCTION.............................................................................................................................3
MANUFACTURE’S CERTIFICATION..............................................................................................3
SAFETY & WARNING.....................................................................................................................3
MANUFACTURER’S RECOMMENDATION....................................................................................4
DESCRIPTION.............................................................................................................................5-7
INFLATING INSTRUCTIONS...........................................................................................................8
HOW TO USE BOSTON VALVE.....................................................................................................8
FISHING ROD HOLDER USE........................................................................................................9
SEAT INSTALLATION .....................................................................................................................9
OAR ASSEMBLY........................................................................................................................9-10
GRAB LINE INSTALLATION..........................................................................................................11
ACCESSORY LINE INSTALLATION..............................................................................................11
SAFETY AND OPERATION INSTRUCTIONS..........................................................................11-12
CARE AND MAINTENANCE.........................................................................................................12
DISASSEMBLY AND STORAGE...................................................................................................13
TROUBLESHOOTING..................................................................................................................13
REPAIRS.......................................................................................................................................13
LIMITED WARRANTY....................................................................................................................14
CONTACT OFFICE LIST............................................................................................................. ..15
98A
(
98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 10/07/2011
SAVE THESE INSTRUCTIONS
Page 3
• This is not a life saving device. Use only under competent supervision. Never allow diving into
this product. Never leave in or near the water when not in use. Never tow from any vehicle.
• Read the complete Owner’s Manual before use and store this Manual in a safe place for future
reference.
• Follow all the Safety and Operating Instructions on this Manual.
• TYPE II, inflatable boats capable of taking an outboard motor. Motors are not to exceed the
maximum recommended power and weight.
• Read the instruction of outboard motor for correct installation and operation.
• Never navigate alone. Beware of offshore winds and currents.
• Do not exceed the maximum recommended capacities. Overloading violates regulations.
• Everyone on board must wear a Personal Floatation Device (PFD).
• Use caution when stepping or climbing aboard the boat. Step into the center of the boat for
maximum stability.
• Distribute the weight of passengers, gear, tackle box, and accessories so that the boat sits level
fore (front) to aft (back) and side-to-side.
• Do not use your boat if you suspect a puncture or leak.
• Adults should inflate the chambers in numbered sequence.
• Not for white water rafting or any other extreme sports activities.
• Follow these rules to avoid drowning, paralysis or other serious injuries.
WARNING
Introduction
This manual has been compiled to help you to operate your craft with safety and pleasure. It contains
details of the craft, the equipment supplied or fitted, its systems, and information on its operation and
m
aintenance. Please read it carefully, and familiarize yourself with the craft before using it.
If this is your first craft, or you are changing to a type of craft you are not familiar with, for your own
comfort and safety, please ensure that you obtain handling and operating experience before
assuming command of the craft.Your dealer or national sailing federation or yacht club will be pleased
to advise you of local sea school, or competent instructors.
PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW OWNER
WHEN YOU SELL THE CRAFT. RECORD THE "HULL IDENTIFICATION NUMBER" (HIN) WHICH IS
PRINTED ON THE BOAT'S HULL IN THE FOLLOWING BOX:
HIN: ________________________
Manufacture’s Certification
For boats between and including 2.5 and 24 meters hull length, a CE (FOR EUROPE ONLY) mark
means that the boat complies with European Directives for Recreational Craft 94/25/EC and
2003/44/EC as published by the International Organization for Standardization, ISO 6185.
NMMA (FOR USA ONLY) certification means that the boat, sold in the United States, has been
judged by the National Marine Manufacture’s Association to be in compliance with the U.S. Coast
Guard Regulations and American Boat and Yacht Council (ABYC) standards and recommended
practices.
Safety
Boat Design Category D -“SHELTERED WATERS”-: Designed for voyages on sheltered coastal
waters, small bays, small lakes, rivers and canals when conditions up to, and including, wind
force 4 and significant wave heights up to, and including, 0.3 m may be experienced, with
occasional waves of 0.5 m maximum height, for example from passing vessels.
98A
(
98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 10/07/2011
SAVE THESE INSTRUCTIONS
Page 4
ISO 6185 PART 1 TYPE
CATEGORY D
Do not overinflate or use high pressure air
compressor to inflate.
Adults should inflate the chambers with cold air in
numbered sequence.
U
se the enclosed ruler to check while inflating.
Nicht zu stark aufblasen und keinen Kompressor
zum Aufblasen verwenden.
Erwachsene sollten die kammern in der
angegebenen Reihenfolge mit kalter luft aufblasen.
Verwenden Sie das belgefügte Meßgerät um die
korrekte Füllung zu überprüfen.
Ne pas surgonfler. Ne pas utiliser de compresseur
pour le gonflage.
Le gonflage doit être effectué par un adulte avec de
l'air froid en suivant les étapes suivantes.
Utiliser la règle jointe pour ajuster le gonglage de la
chambre à air principale.
ISO-6185 boat design category (certain models). CE mark (for Europe only) (certain models).
Europe hull identification number (HIN). USA hull identification number (HIN).
Manufacturer’s recommended maximum load capacity. Maximum person’s capacity.
Manufacturer’s name and country of origin. Model name and number.
Manufacturer’s recommended working pressure.
NMMA (for USA only) certification means that the boat, sold in the United States, has been judged by
the National Marine Manufacture’s Association to be in compliance with the U.S. Coast Guard
Regulations and American Boat and Yacht Council (ABYC) standards and recommended practices.
Maximum motor power and motor weight.
9
8
7
6
5
4
3
2
1
Manufacturer’s Recommendation
T
he total number of persons, motor power and total weight shall not exceed the limits printed on
the boat. Please refer to the boat's hull label for the actual values of your boat. See Table A.
BOAT LABEL FORMAT
10
M
AXIMUM CAPACITIES
MAXIMUM-KAPAZITÃT
C
APACITÉS MAXIMUM
M
AXIMUM POWER
MAXIMUM MOTORKRAFT
PUISSANCE MAXIMUM
PERSONS
P
ERSONEN
P
ERSONNES
MANUFACTURER
HERSTELLER
FABRICANT
MODEL
MODELL
MODÈLE
RECOMMENDED WORKING PRESSURE FOR EACH CHAMBER
EMPFOHLENE ARBEITENDE DRUCK FÜR JEDE LUFTKAMMER
RECOMMANDÉ FONCTIONNEL PRESSION POUR CHAQUE CHAMBRE À AIR
CN-XEE
________
XEE
________
BY INTEX
®
LOAD CAPACITY
BASIC FLOTATION
___Kg ( ___ Lbs) MAX.
National Marine Manufacturers Association
____________________
= ___ bar ( ___ psi)
CHINA
3
5
6
7
8
9
2
1
10
MAXIMUM CAPACITIES
PERSONS OR ____kg (___Lbs)
____
____ POUNDS, PERSONS, GEAR, ENGINE
DESIGN COMPLIANCE WITH NMMA REQUIREMENTS BELOW IS VERIFIED.
MFGR. RESPONSIBLE FOR PRODUCTION CONTROL
+ + = ___ Kg ( ___ Lbs)
+ +
___kW (___HP) / ___Kg (___Lbs)
= ___
11
4
11
CHALLENGER 3a
CHALLENGER 4a
SEAHAWK 2
SEAHAWK 3
SEAHAWK 4
EXCURSION 2
EXCURSION 3
EXCURSION 4
EXCURSION 5
SEAHAWK II
MARINER 4
68369
68371
68346
68349
68350
68318
68319
68324
68325
68377
68376
II
II
II
II
II
II
II
II
II
II
II
2.95
3.51
2.36
2.95
3.51
2.41
2.62
3.15
3.66
2.97
3.28
1.37
1.45
1.14
1.37
1.45
1.45
1.57
1.65
1.68
1.27
1.45
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
3
255
340
200
300
400
200
300
400
455
300
400
3
4
2
3
4
2
3
4
5
3
4
9
13
6
11
17
13
15
19
22
16
32
0.035 (0.5)
0.035 (0.5)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.080 (1.14)
0.080 (1.14)
MODEL TYPE
Unladen Craft Weight
m
m
HP
K
g
K
g
bar (psi)
L
h
W
h
TABLE A
98A
(
98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 10/07/2011
SAVE THESE INSTRUCTIONS
Page 5
Description
Challenger Series
36
Seahawk 2
Seahawk 4
1
19
8
728
7
2
4
45
5
6
10
3
5
Seahawk 3
1
8
10
7294 6
Seahawk Series
Seahawk
9
11
11
1110
" " - Recommended seating arrangement of the occupants.
" " - Recommended seating arrangement of the occupants.
36
Challenger 4a
1
10
2
8
4
5
35
Challenger 3a
1
8 102 46
11
11
Loading...