Intex Krystal Clear SF90220T Owner's Manual

193

FR

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

Krystal Clear

TM

Sand Filter Pump

Model SF90220T 4 m

3

220 - 240 V~, 50 Hz, 190 W
Hmax 3.0 m, Hmin 0.19 m, IPX4
Max. Water Temperature 35 °C

Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifications and appearance, which may
result in updates to the instruction manual without notice.

OWNER’S MANUAL

©2016 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.

- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O

Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

• Distributed in the European
Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union
durch/

Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

For illustrative purposes only.

193-*FR-R0-1708

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

Page 2

Warnings

........................................................................................

3

Parts References

..........................................................................

4-5

Setup Instructions

.......................................................................

6-13

Product Specifications

.................................................................

8

Operating Instructions

.................................................................

14-16

Intex Pools Operating Time Table

................................................

17

Non-Intex Pools Operating Time Table

........................................

18

Maintenance

..................................................................................

19

Long Term Storage

........................................................................

19

Troubleshooting Guide

.................................................................

20

Common Pool Problems

...............................................................

21

General Aquatic Safety

.................................................................

21

Limited Warranty

............................................................................

22

TABLE OF CONTENTS

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

• Always supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.

• Assembly and disassembly by adults only.

• Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter
(GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by
a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a portable
residual current device (PRCD).

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the
product.

• The plug must be accessible after produc t is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other
equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to connect unit to
electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Keep this product more than 3.5m away from the pool.

• Keep the plug of this product more than 3.5m away from the pool.

• Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.

• Do not operate this product when pool is occupied.

• This product is for use with storable pools only. Do not use with permanently installed pools. A storable pool is constructed so
that it may be readily disassembled for storage and reassembled to its original configuration.

• To reduce the risk of entrapment hazard, never enter the pool if suction strainer component is loose, broken, cracked,
damaged or missing. Replace loose, broken, damaged, cracked or missing suction strainer components immediately.

• Never play or swim near suction fittings. Your body or hair may be trapped causing permanent injury or drowning.

• To prevent equipment damage and risk of injury, always turn pump off before changing the filter control valve position.

• Never operate this product above the maximum working pressure stated on the filter tank.

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve cover to blow off and cause serious injury,
property damage or death.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT
OR OTHER SERIOUS INJURY OR DEATH.

These product warnings, instructions and safety rules provided with the product represent some common risks of water
recreation devices and do not cover all instances of risk and danger. Please use common sense and good judgement when
enjoying any water activity.

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

Page 4

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

34

1

14

9

6

2

13

20

35

36

3

15

16

4

12*

7

8

32

11

33

17

10

5

19

18

" * ":

Optional.

NOTE:

Drawings for illustration purpose only. Actual product may vary. Not to scale.

37

21
22

23 24

25 26

28

29

31

**

**

38

21

22

23 24

25 40

27

28

42

30

39

39

41

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

" * ":

Optional.

When ordering parts, be sure to quote the model number and part numbers.

REF. NO. DESCRIPTION QTY.

SPARE PART NO.

1 PRESSURE GAUGE 1 11720
2 TANK COVER & 6-WAY VALVE SET 1 11721
3 DRAIN OUTLET COVER 1 11131
4 CLAMP ASSEMBLY 1 11722
5 TANK O-RING 1 11728
6 SAND FILTER PUMP MOTOR INLET O-RING 1 10712
7 CENTER PIPE 1 11729
8 FILTER GRID 1 11730

9 DRAIN VALVE CAP 1 11456
10 DRAIN VALVE O-RING 1 11385
11 L-SHAPE O-RING 4 11228

12* HOSE WITH NUTS 2 11769

13 SAND FILTER INTERCONNECETING HOSE 1 11764
14 TRANSPARENT OUTLET ADAPTOR 2 11723
15 TRANSPARENT OUTLET ADAPTOR O-RING 4 11724
16 CLAMP PIN 1 11726
17 CLAMP SCREW 1 11727
18 L-SHAPE O-RING 1 11412
19 TRANSPARENT LEAF TRAP 1 11733
20 PUMP MOTOR 1 11735

21*

PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)

2 10747

22*

HOSE O-RING

2 10262
23* STEP WASHER 2 10745
24* STRAINER NUT 2 10256
25* FLAT STRAINER RUBBER WASHER 2 10255
26*

THREADED STRAINER CONNECTOR

1 11235
27* ADJUSTABLE POOL INLET JET NOZZLE 1 12369
28* ADAPTOR B 2 10722
29* STRAINER CONNECTOR 1 11070
30* POOL INLET JET NOZZLE 1 12364
31* STRAINER GRID 1 12197

32 10" SAND FILTER PUMP TANK 1 11731
33 10" SAND FILTER PUMP TANK BASE 1 11732
34 TRANSPARENT OUTLET ADAPTOR SCREW 4 11725
35 AIR RELEASE VALVE 1 10725
36 AIR RELEASE VALVE

O-RING

1 10264
37*

ADAPTOR A

3 10849

38 STRAINER GRID 1 12198
39* AIR JET VALVE 1 12363
40* INLET THREADED AIR CONNECTOR 1 12371
41* POOL INLET AIR ADAPTOR 1 12368
42* INLET STRAINER CONNECTOR 1 12365
43* AIR JET VALVE CAP (NOT SHOWN) 1 12373

PARTS REFERENCE (continued)

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

Page 5

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

The strainer grid prevents large objects from jamming and/or damaging the filter pump. If
your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before
inflating the pool liner top ring. The part numbers here onward refer to the parts depicted
in the Parts List section of this manual. To install, do the following:

1.

In a counter-clockwise motion unscrew plunger valve

union from the threaded strainer connector

(26) (see

drawing 1).

Be careful not to lose the step rubber

washer

(23)

. Place the plunger valve on the ground in

a safe place.

2.

In a counter-clockwise motion unscrew the strainer nut

(24)

from the threaded connector

(26).

Leave the flat

washer

(25)

on the connector

(26)

.

3.

Install the strainer and plunger valve at the lower
position of pool outlet (marked "+"). From the inside of
the pool liner insert the connector

(26)

into one of the
pre-cut holes with the washer remaining on the
connector to be placed against the inside of the liner
wall.

4.

Before assembly, lubricate the threads with a

petroleum jelly. With the flat side of the strainer nut

(24)

facing the outside wall of the liner in a clockwise motion

screw the strainer nut

(24)

back onto the threaded

connector

(26) (see drawing 2)

.

5.

Finger tighten the strainer nut

(24)

onto the threaded

connector

(26)

.

6.

Grasp the plunger valve assembly. Make sure the step

(23)

is in place.

7.

In a clockwise motion screw the plunger valve union
back onto the threaded connector

(26) (see drawing 3)

.

8.

In a clockwise motion turn the plunger valve handle to
close position. Ensure the plunger valve is securely
closed. This will prevent water from flowing out during
filling of the pool

(see drawing 4)

.

POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional)

Page 6

2

25

INSIDE

LINER WALL

24

1

23

2

1

3

1

2

4

INSIDE

LINER WALL

26 38

193

FR

SAVE THESE INSTRUCTIONS

(193FR) MODEL SF90220T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2016

English

POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional)

Page 7

5

2

1

7

1

2

8

INSIDE

LINER WALL

9

WATER

FLOW

POOL

6

25

40

27

INSIDE LINER

WALL

24

39

1.

In a counter-clockwise motion unscrew plunger valve

union from the inlet threaded air connector

(40) (see

drawing 5)

. Be careful not to lose the step rubber

washer

(23)

. Place the plunger valve on the ground in

a safe place.

2.

In a counter-clockwise motion unscrew the strainer

nut

(24)

from the inlet threaded air connector

(40)

.

Leave the flat washer

(25)

on the connector

(40)

.

3.

Install the nozzle and plunger valve at the upper
position of pool inlet. From the inside of the pool liner
insert the nozzle union

(27 & 40)

into one of the
pre-cut holes with the washer remaining on the
connector to be placed against the inside of the liner
wall.

4.

Before assembly, lubricate the threads with a
petroleum jelly. Then, with the flat side of the
strainer nut

(24)

facing the outside wall of the liner

in a clockwise motion screw the strainer nut

(24)

back onto the inlet threaded air connector

(40) (see

drawing 6)

.

5.

Finger tighten the adjustable pool inlet jet nozzle

(27)

and the strainer nut

(24)

onto the inlet threaded air

connector

(40)

.

6.

Grasp the plunger valve assembly. Make sure the
step washer

(23)

is in place.

7.

Screw the air jet valve

(39)

over the inlet threaded air

connector

(40). NOTE:

Make sure the air jet valve
is securely tighten and facing up. In a clockwise
motion screw the plunger valve union back onto the
inlet threaded air connector

(40) (see drawing 7)

.

8.

In a clockwise motion turn the plunger valve handle
to close position. Ensure the plunger valve is securely
closed. This will prevent water from flowing out during
filling of the pool

(see drawing 8)

.

9.

Adjust the direction of nozzle head pointing away
from the pool outlet for a better circulation result

(see drawing 9).

10.

The pool liner is now ready to fill with water. Consult
the above-ground-pool owner’s manual for filling
instructions.