Intex Krytstal Clear 634T, Krystal Clear 634T Owner's Manual

110

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

OOWWNNEERR’’SS MMAANNUUAALL

IMPORTANT

SAFETY RULES

Read, understand, and follow all

instructions carefully before

installing and using this product.

Don’t forget to try these other fine Intex products: pools, pool accessories,
inflatable pools and in-home toys, airbeds and boats available at fine
retailers or visit our website.

For illustrative purposes only.

©2009 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.

- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O
Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European
Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union
durch/Intex Trading B.V., P.O. Box nr. 1075 – 4700 BB Roosendaal – The Netherlands

Krystal Clear™
Model 634T Filter Pump

220 - 240 V~, 50 Hz, 360 W
Hmax 1.5 m, H min 0.19 m, IPX4
Max. Water Temperature 35 °C

110**-A0-1007

110

SAVE THESE INSTRUCTIONS

Page 2

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

TTAABBLLEE OOFF CCOONNTTEENNTTSS

Warnings.......................................................................... 3

Parts List & Reference.................................................... 4-6

Setup Instructions........................................................... 7-10

Operating Instructions.................................................... 11

Operating Time Table...................................................... 12

Maintenance..................................................................... 13-14

Pool Care and Chemicals............................................... 13

Long Term Storage.......................................................... 14

Troubleshooting Guide................................................... 15

Common Pool Problems................................................. 16

General Aquatic Safety................................................... 17

Limited Warranty.............................................................. 18

Intex Service Center Locations...................................... 19

110

SAVE THESE INSTRUCTIONS

Page 3

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSAAFFEETTYY RRUULLEESS

WARNING

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

These product warnings, instructions and safety rules provided with the product represent
some common risks of water recreation devices and do not cover all instances of risk and
danger. Please use common sense and good judgement when enjoying any water activity.

• To reduce the risk of injury, do not permit children to use this product. Always

supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge. They
must at all times be supervised by a knowledgeable and experienced adult
responsible for their safety.

• Assembly and disassembly by adults only.

• Risk of electric shock. Connect this product only to a grounding type receptacle

protected by a ground-fault circuit interrupter (GFCI) or residual current device
(RCD). Contact a qualified electrician if you cannot verify that the receptacle is
protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD,
which has a maximum rate of 30mA. Do not use a portable residual current device
(PRCD).

• Always unplug this product from the electrical outlet before removing, cleaning,
servicing or making any adjustment to the product.

• The plug must be accessible after product is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by
lawn mowers, hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug
adaptors or converter plugs to connect unit to electric supply; provide a properly
located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when
your hands are wet.

• Keep this product more than 2m away from the pool.

• Keep this product more than 3.5m away from the pool (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• Position this product away from the pool, so as to prevent children from climbing on
it and accessing the pool.

• Do not operate this product when pool is occupied.

• This product is for use with storable pools only. Do not use with permanently

installed pools. A storable pool is constructed so that it may be readily
disassembled for storage and reassembled to its original configuration.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN
PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR
OTHER SERIOUS INJURY OR DEATH.

110

SAVE THESE INSTRUCTIONS

Page 4

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

PPAARRTTSS LLIISSTT

1

9

45

10

13 14 15

2

11 12

6

PARTS LIST

3

87

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

110

SAVE THESE INSTRUCTIONS

Page 5

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

PPAARRTTSS RREEFFEERREENNCCEE

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

When ordering parts, be sure to quote the model number and part numbers.

1
2
3
4
5
6
7
8

REF. NO.

DESCRIPTION

QTY.

SPARE PART NO.

1
2
2
1
1
1
1
2

THREADED FILTER HOUSING COLLAR
AIR RELEASE VALVE/SEDIMENT RELEASE VALVE
VALVE O-RING
FILTER HOUSING COVER
FILTER HOUSING O-RING
FILTER CARTRIDGE (59905)
AIR RELEASE VALVE B (WITH O-RING)
PUMP HOSE WITH NUTS

10491
10460
10264
10490
10492

10725
10494

2
3

4

5

1

6

3

7

2

8

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

110

SAVE THESE INSTRUCTIONS

Page 6

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

PPAARRTTSS RREEFFEERREENNCCEE

PARTS REFERENCE (continued)

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to
scale.

9

10

11 12 13 14 15

9

10

11 12 13 14

9

10
11
12
13
14
15

REF. NO.

DESCRIPTION

QTY.

SPARE PART NO.

2

2
2
2
1

10747

10262
10745
10256
10255
11235
11074

When ordering parts, be sure to quote the model number and part numbers.

PLUNGER VALVE (HOSE O-RING & STEP WASHER
INCLUDED)

HOSE O-RING
STEP WASHER
STRAINER NUT
FLAT STRAINER RUBBER WASHER
THREADED STRAINER CONNECTOR
ADJUSTABLE POOL INLET NOZZLE

110

SAVE THESE INSTRUCTIONS

Page 7

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

1. Grasp the strainer and plunger valve

mechanism.

2. In a counter-clockwise motion unscrew

plunger valve union from the threaded
strainer connector (14) (see drawing 1).Be
careful not to lose the step rubber
washer (11). Place the plunger valve on the
ground in a safe place.

3. In a counter-clockwise motion unscrew
the strainer nut (12) from the threaded
connector (14). Leave the flat washer (13)
on the connector (14).

4. Install the strainer and plunger valve at the
lower position of pool outlet (marked"+").
From the inside of the pool liner insert
the connector (14) into one of the pre-cut
holes with the washer remaining on the
connector to be placed against the inside
of the liner wall.

5. Before assembly, lubricate the threads with
a petroleum jelly. Then, with the flat side of
the strainer nut (12) facing the outside wall
of the liner in a clockwise motion screw the
strainer nut (12) back onto the threaded
connector (14) (see drawing 2).

6. Finger tighten the strainer nut (12) onto the
threaded connector (14).

7. Grasp the plunger valve assembly. Make
sure the step washer (11) is in place.

8. In a clockwise motion screw the plunger
valve union back onto the threaded
connector (14) (see drawing 3).

9. Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. not, grasp the handle at the top
and push down turning the handle in a
clockwise direction until the plastic
protruding notch anchors in the "0/1"
position. This will prevent water from
flowing out during filling of the pool (see

drawings 4.1 & 4.2).

The strainer grid prevents large objects from jamming and/or damaging the
filter pump. The plunger valve assembly prevents water from flowing into the
filter pump while the filter cartridge is being placed or cleaned. If your pool
has inflatable top ring, install the strainer, nozzle and plunger valve before
inflating the pool liner top ring. The parts numbers here onward, refer to the
parts depicted in the Parts List section of this manual. To install, do the
following:

1

2

3

4.1

4.2

13 14

INSIDE

LINER WALL

INSIDE

LINER

WALL

12

2

1

1

2

1

2

POOL OUTLET - STRAINER & PLUNGER VALVE SETUP

110

SAVE THESE INSTRUCTIONS

Page 8

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

POOL INLET - NOZZLE & PLUNGER VALVE SETUP

1. Grasp the nozzle and plunger valve
mechanism.

2. In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector (14) (see drawing 5).
Be careful not to lose the step rubber
washer (11). Place the plunger valve on the
ground in a safe place.

3. In a counter-clockwise motion unscrew
the strainer nut (12) from the threaded
connector (14). Leave the flat
washer (13) on the connector (14).

4. Install the nozzle and plunger valve at the
upper position of the pool inlet. From the
inside of the pool liner insert the
connector (14) into one of the pre-cut holes
with the washer remaining on the
connector to be placed against the inside
of the liner wall.

5. Before assembly, lubricate the threads with
a petroleum jelly. Then, with the flat side of
the strainer nut (12) facing the outside wall
of the liner in a clockwise motion screw the
strainer nut (12) back onto the threaded
connector (14) (see drawing 6).

6. Finger tighten the adjustable pool inlet
nozzle (15) and the strainer nut (12) onto
the threaded connector (14).

7. Grasp the plunger valve assembly. Make
sure the step washer (11) is in place.

8. In a clockwise motion screw the plunger
valve union back onto the threaded
connector (14) (see drawing 7).

9. Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at
the top and push down turning the handle
in a clockwise direction until the plastic
protruding notch anchors in the "0/1"
position. This will prevent water from
flowing out during filling of the pool (see

drawings 8.1 & 8.2).

10. Adjust the direction of the nozzle head

pointing away from the pool outlet for a
better circulation result (see drawing 9).

11. The pool liner is now ready to be filled with

water. Consult the above-ground-pool
owner’s manual for the filling instructions.

5

7

8.1

8.2

INSIDE

LINER

WALL

POOL

9

2

1

1

2

1

2

6

13 14 15

INSIDE

LINER WALL

12

WATER

FLOW

110

SAVE THESE INSTRUCTIONS

Page 9

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

FILTER PUMP HOSE CONNECTION SETUP

1. Remove the Krystal Clear™ filter pump and hoses from the packaging.

2. Place the filter pump in such a manner, that you can easily assemble the

hose (8) connections to the plunger valve.
Note: Some regional regulations may require the filter pump to be
mounted on a stationary platform. There are two mounting holes located
in the pump base for this reason. Consult your local authorities for
filter-pump mounting requirements.

3. Grasp the two pump hoses (8) and connect the hose nuts to the filter pump.

4. In a counter-clockwise motion unscrew the threaded filter housing collar (1)

from the filter housing. Place it in a safe place.

5. The Filter Pump is an airtight system. In a counter-clockwise motion turn both

air release valves (2 & 7) 1 - 2 turns to open. DO NOT remove air release

valves as water will expel with force if the motor is turned on and injury
may occur.

6. Grasp and remove the filter housing cover (4). Check to see if a cartridge is

inside the housing. If yes, replace the cover, finger tighten the housing collar (1)
back onto the filter housing.

7. Gently finger tighten the sediment release valve located at the bottom of the

housing to be sure that water does not leak out.

8. When the pool is filled connect the hose from the bottom of the filter housing to

the highest strainer assembly. You will find the hose connection at the bottom of
the plunger valve assembly. Use the hose nut to attach the hose.

9. Connect the second hose which is fixed to the middle of the motor housing to

the remaining liner connection.

WARNING

Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.

WATER LEVEL

ADJUSTABLE POOL

INLET NOZZLE

PLUNGER VALVE

ASSEMBLY

HOSE NUT

OUTLET HOSE

INSIDE LINER

WALL

THREADED

STRAINER

CONNECTOR

FILTER HOUSING

COLLAR

FILTER CARTRIDGE

INSIDE

FILTER HOUSING

COVER

AIR RELEASE

VALV E

MOTOR

HOUSING

HOSE O-RING

POWER CORD

INLET HOSE

OUTSIDE

LINER WALL

(ILLUSTRATION NOT TO SCALE)

W

A

T

E

R

F

L

O

W

W

A

T

E

R

F

L

O

W

The installation instruction shall provide information on requirements specified for
the electrical installation and shall include reference to national wiring rules.

HOSE O-RING

110

SAVE THESE INSTRUCTIONS

Page 10

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

FILTER PUMP STATIONARY MOUNTING OPTION

Some countries, especially in the European community, require the filter-pump to
be secured to the ground or to a base in a permanent upright position. Check your
local authorities to determine if there is a regulation in your area regarding
above-the-ground swimming pool filter-pumps. If yes, then the filter-pump can be
mounted to a platform using the two holes located in the base. See drawing below.

The filter-pump can be mounted on a cement base or onto a wooden platform to
prevent accidental falling over. Total assembly must exceed 18kg.

165 mm

1. The mounting holes are 6.4 mm in diameter and spaced 165 mm apart.

2. Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.

110

SAVE THESE INSTRUCTIONS

Page 11

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

OOPPEERRAATTIINNGG IINNSSTTRRUUCCTTIIOONNSS

1. Make sure the filter pump is switched off. The switch is located on the motor

housing.

2. Connect the power cord to a GFCI protected electrical outlet.

3. Grasp a plunger valve handle. Turn the handle counter-clockwise, pull up until

it stops, and then turn it clockwise until the metal protruding notch anchors in
the "0/1" position. Repeat for the second plunger valve. This opens the valves,
allowing water to flow into the filter pump.

4. With water flowing into filter pump, the water pressure will allow the air trapped

inside to escape from the air release valves (2 & 7). When all the air has
escaped water will flow out of the valves (2 & 7). When this occurs gently finger
tighten the valves (2 & 7) in a clockwise direction.

5. To operate the filter pump on “TIMER” mode:

A. Set the timer dial to the desired operating hours. See operation time table.

See Fig. 10

B. Turn on the pump by pressing the switch to “ ” position, the filter pump is

now filtering the water and will stop after the operating hours are
completed. The built-in timer will now operate for the number of hours
selected at the same time each day.

C. Operating hours can be re-adjusted if necessary. Follow step A – B.

To operate the filter pump manually (without the “TIMER” mode):

A. Turn on the pump by pressing the switch to “I” position, the filter pump is

now filtering the water.

B. To turn off the pump, press the switch to “O” position.

To prevent air lock, open the lower plunger valve (connected inlet hose)
first and then the upper plunger valve (connected outlet hose). Open the air
release valves, wait until water starts to flow out of the air release valves,
close air release valves.

IMPORTANT

Risk of electric shock. Connect this product only to a grounding type
receptacle protected by a ground-fault circuit interrupter (GFCI) or residual
current device (RCD). Contact a qualified electrician if you cannot verify
that the receptacle is protected by a GFCI/RCD. Use a qualified electrician
to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a
portable residual current device (PRCD).

WARNING

OPERATING INSTRUCTIONS

ON

OFF
TIMER

FIG 10

TIMER DIAL (HOURS)

6

8

4

2

12

110

SAVE THESE INSTRUCTIONS

Page 12

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

OPERATING TIME TABLE

This table shows the required operating time for average use of the filter pump with AGP's.The
filter pump running time should be 1 hour longer than the required operating time of the
Saltwater System.

Pool Size

Water Capacity (Calculated at

90% for Frame Pool and 80%

for Easy Set & Oval Pool)

100% Water

Capacity

Recommend

operating hours

per day

(Gals)

(Liters) (M3) (Gals) (Hours)

INTEX ABOVE GROUND POOLS (AGP’s)

EASY SET

®

POOL

CIRCULAR

METAL

FRAME POOL

ULTRA FRAME

POOL

SEQUOIA SPIRIT

®

POOL SET

OVAL FRAME

POOL

RECT. ULTRA

FRAME POOL

15' x 33" (457cm x 84cm)

15' x 36" (457cm x 91cm)
15' x 42" (457cm x 107cm)
15' x 48" (457cm x 122cm)
16' x 42" (488cm x 107cm)
16' x 48" (488cm x 122cm)
18' x 42" (549cm x 107cm)
18' x 48" (549cm x 122cm)
18' x 52" (549cm x 132cm)

15' x 36" (457cm x 91cm)
15' x 42" (457cm x 107cm)
15' x 48" (457cm x 122cm)
16' x 48" (488cm x 122cm)
16' x 52" (488cm x 132cm)
18' x 48" (549cm x 122cm)
18' x 52" (549cm x 132cm)
20' x 48" (610cm x 122cm)
20' x 52" (610cm x 132cm)
24' x 48" (732cm x 122cm)
24' x 52" (732cm x 132cm)
16' x 48" (488cm x 122cm)
18' x 52" (549cm x 132cm)

16'8" x 49" (508cm x 124cm)

18'8" x 53" (569cm x 135cm)
18' x 10' x 42" (549cm x 305cm x 107cm)
20' x 12' x 48" (610cm x 366cm x 122cm)
24' x 12' x 48" (732cm x 366cm x 122cm)
28' x 12' x 48" (853cm x 366cm x 122cm)
28' x 12' x 52" (853cm x 366cm x 132cm)

18' x 9' x 52" (549cm x 274cm x 132cm)
24' x 12' x 52" (732cm x 366cm x 132cm)
32' x 16' x 52" (975cm x 488cm x 132cm)

2587
2822
3284
3736
3754
4273
4786
5455
5894
3282
3861
4440
5061
5501
6423
6981
7947

8638
11483
12481

5061

6981

5061

6981

2885

4393

5407

6420

6925

4545

8080
14364

9792
10681
12430
14141
14209
16173
18115
20647
22309
12422
14614
16805
19156
20821
24311
26423
30079
32695
43463
47241
19156
26423
19156
26423
10920
16628
20465
24300
26211
17203
30583
54368

12.2

13.4

15.5

17.7

17.8

20.2

22.6

25.8

27.9

13.8

16.2

18.7

21.3

23.1

27.0

29.4

33.4

36.3

48.3

52.5

21.3

29.4

21.3

29.4

13.7

20.8

25.6

30.4

32.8

19.1

34.0

60.4

3233
3527
4105
4671
4692
5342
5983
6819
7367
3647
4290
4934
5623
6112
7136
7757
8830

9598
12758
13868

5623

7757

5623

7757

3607

5491

6758

8025

8657

5050

8978
15960

2
2
2
2
2
4
4
4
4
2
2
2
4
4
4
4
4
4
6
6
4
4
4
4
2
4
4
4
4
4
4
8

110

SAVE THESE INSTRUCTIONS

Page 13

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

MMAAIINNTTEENNAANNCCEE

POOL CARE AND CHEMICALS

CLEANING OR REPLACING FILTER CARTRIDGES

• All pools require care to keep the water clear and hygienically clean. With
proper chemical control, your filter will help attain this objective. Consult your
pool supply dealer for instructions regarding the proper use of chlorine,
algaecide and other chemical agents required for sparkling clear water.

• Keep pool chemicals away from children.

• Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations
could occur.

• Daily pH checking and chemical treatment of the water is very important and
can not be overemphasized. Chlorine, algaecide and maintenance of proper pH
levels are required when filling the pool as well as during the season. Consult
your local swimming pool supply store for instructions.

• The season's first filling of the pool may have brackish water requiring extra
water additives and extra filter changes. Do not allow swimming in pool until the
pH level is balanced. Consult your local swimming pool supply store for
instructions.

• Keep spare filter cartridges on hand. Replace cartridges every two weeks.

• Chlorinated water may damage lawns, gardens or shrubbery as children play
in the pool and splash water outside the pool. Lawn areas underneath the
pool liner will be destroyed. Note that some types of grass may grow through
the liner.

• Filter run time depends on pool size, weather and usage level. Experiment with
various run times so as to produce clean clear water.

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always
follow the chemical manufacturer’s directions, and the health and hazard
warnings.

It is recommended that the filter cartridge be replaced at least
every 2 weeks.

1. Make sure the filter pump is turned off, then disconnect the power cord from

the electrical outlet.

2. Grasp a plunger valve handle. Turn the handle counter-clockwise, push down
until it stops and then turn it clockwise until the plastic protruding notch anchors
in the "0/1" position. Repeat for the second plunger valve. This prevents the
water from flowing out of the pool.

3. Gently turn the top air release valve once or twice in a counter-clockwise
direction. The housing cover can now be easily removed.

4. In a counter-clockwise direction remove the filter housing collar (1). Place it in a
safe location.

5. Remove the housing cover (4).

6. Now remove the used filter cartridge.

110

SAVE THESE INSTRUCTIONS

Page 14

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

MMAAIINNTTEENNAANNCCEE

1. Before emptying your pool for long term storage, or relocation, be sure the

water is directed towards an acceptable drain water receptacle away from the
house. Check local regulations for specific directions regarding disposal of
swimming pool water.

2. Disconnect power cord from electrical outlet.

3. Now, drain the pool.

4. When the pool is empty, disconnect all hoses from pump and plunger valves

and remove the strainers from the pool wall.

5. Drain all water from the filter pump.

6. Leave filter pump pieces & hoses outside to thoroughly air dry.

7. Twist the plunger collar counter-clockwise removing the water flow control
mechanism from the plunger housing.

8. Coat the following O-rings and washers with petroleum jelly for long term

storage:

• Air release valve & sediment O-rings (3).

• Filter housing cover O-ring (5).

• Pump hose O-rings (10).

• Strainer valve assembly step washers (11).

• Flat strainer rubber washers (13).

9. Discard the used filter cartridge. Put aside 1 or 2 new cartridges for next
season’s use.

10. It is best to place all dry pieces in the original packaging for storage or place
them in an airtight plastic bag.

11. Store the unit and accessories in a dry place. The storage's temperature should
be controlled, between 32 degrees Fahrenheit (0 degrees Celsius) and 104
degrees Fahrenheit (40 degrees Celsius) storage location.

LONG TERM STORAGE

CLEANING OR REPLACING FILTER CARTRIDGES (continued)

7. Examine the inside of the filter housing.

8. If dirt or sediment is located on the bottom of the housing then:
A. In a counter-clockwise motion gently unscrew and remove the sediment

valve (2) located at the bottom of the housing. Place it in a safe place.

B. With a bucket of water or a garden hose pour water into the housing

flushing out the sediment.

C. Screw back the sediment valve (2) in a gentle clockwise motion. Do not

over-tighten.

9. Place a new cartridge filter in the housing.

10. Return the housing cover (4) to its position and in a clockwise direction rescrew
the housing collar (1) onto the filter housing.

11. Turn both plunger valve handles in a counter-clockwise direction, pull up until

they stop, and then turn them clockwise until the metal protruding notch
anchors in the "0/1" position.

12. When the trapped air has escaped through the air release valve gently
retighten the valve (2) in a clockwise direction.

13. Reconnect the power cord.

14. Turn on the pump.

IMPORTANT

It is best to store away your poolsystem in its original packaging.

110

SAVE THESE INSTRUCTIONS

Page 15

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

TROUBLESHOOTING GUIDE

TTRROOUUBBLLEESSHHOOOOTTIINNGG GGUUIIDDEE

FILTER MOTOR
FAILS TO START

FILTER DOESN’T
CLEAN POOL

FILTER DOESN’T
PUMP WATER OR
THE WATER FLOW
IS VERY SLOW

PUMP DOESN’T
WORK

TOP COVER
LEAKING

HOSE LEAKING

AIR LOCK

• The motor is not plugged in.

• The Fuse box needs checking.

• The GFCI/RCD circuit breaker
is tripped.

• Motor too hot and overload
protection is shut off.

• Improper chlorine or pH
levels.

• Filter cartridge is dirty.

• Damaged cartridge.

• Excessively dirty pool.

• The strainer screen is
restricting the water flow.

• Clogged inlet or discharge.

• An air leak on the intake line.

• Scale or buildup on cartridge.

• Excessively dirty pool.

• Dirty filter cartridge.

• The nozzle and strainer
connection are reversed.

• Low water level.

• Strainer screen plugged up.

• An air leak on the intake hose.

• Faulty motor or the impeller
is jammed.

• An air lock inside the cartridge
chamber.

• O-ring missing.

• Cover is not tight.

• Filter cartridge is dirty.

• Hose nuts are not well-fitted.

• There’s air trapped in the
pump housing and inlet hose.

• The inlet and outlet hoses
connection are reversed.

TROUBLE CAUSE SOLUTION

IMPORTANT

If you continue to experience difficulty, please contact our Consumer
Service Department for assistance. See back cover for contact information.

• Filter cord must be plugged into a 3
wire outlet that is protected by a Class
A Ground Fault Circuit Interrupter, or
RCD.

• Reset circuit breaker. If circuit breaker
trips repeatedly, your electrical system
may have a defect. Turn off circuit
breaker and call an electrician to
correct the problem.

• Let the motor cool down.

• Adjust the chlorine and pH level. Consult
your local swimming pool supply stores.

• Clean or replace cartridge.

• Check the cartridge for holes. Replace
if damaged.

• Operate the filter for longer periods.

• Clean the strainer screen at the inlet.

• Clear any obstructions in the intake
hose by discharging it inside pool wall.

• Tighten hose nuts, check hoses for
damage, check pool water level.

• Replace cartridge.

• Clean cartridge more often.

• Clean inside the plunger valve.

• Pull valve handle to full upright position.

• Install the nozzle at the upper position
of pool inlet, and the strainer at the
lower position of pool outlet.

• Fill pool to correct water level.

• Clean strainer screens at pool inlet.

• Tighten hose nuts, check hose for
damage.

• Clear any sticks or leaves in the
intake hose.

• Turn and pull valve handle to full upright
position.

• Remove cover & check for O-ring.

• Tighten cover (Manually).

• Replace or clean cartridge.

• Tighten or reinstall hose nut.

• Open air release valves, wait until water
starts to flow out of the valves, then
close it.

• The lower position of pool outlet
connects to filter pump water inlet. The
upper position of pool inlet connects to
filter pump water outlet.

110

SAVE THESE INSTRUCTIONS

Page 16

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

COMMON POOL PROBLEMS

CCOOMMMMOONN PPRROOBBLLEEMMSS

PROBLEM DESCRIPTION CAUSE SOLUTION

ALGAE

COLORED
WATER

FLOATING
MATTER IN
WATER

CHRONIC
LOW WATER
LEVEL

SEDIMENT
ON POOL
BOTTOM

SURFACE
DEBRIS

• Chlorine and pH levels
need adjustment.

• Copper, iron or
manganese in water
being oxidized by the
added chlorine.
This is Common.

• "Hard water" caused
by a too high pH level.

• Chlorine content is low.

• Foreign matter in
water.

• Rip or hole in pool
liner or hoses.

• The drain valves are
loose.

• Heavy use, getting in
and out of pool.

• Pool too close to
trees.

• Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended
level.

• Vacuum pool bottom.

• Maintain proper chlorine
level.

• Adjust pH level to the
recommended level.

• Run filter until water is clear.

• Clean cartridge frequently.

• Correct the pH level. Check
with your pool dealer for
advice.

• Adjust the chlorine level.

• Clean or replace your filter.

• Repair with a patch kit.

• Finger tighten all caps.

• Use Intex pool vacuum to
clean bottom of pool.

• Use Intex pool skimmer.

• Greenish water.

• Green or black
spots on pool liner.

• Pool liner is
slippery and/or has
a bad odor.

• Water turns blue,
brown, or black
when first treated
with chlorine.

• Water is cloudy or
milky.

• Level is lower than
on previous day.

• Dirt or sand on
pool floor.

• Leaves, insects
etc.

110

SAVE THESE INSTRUCTIONS

Page 17

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

SSAAFFEETTYY GGUUIIDDEELLIINNEESS

GENERAL AQUATIC SAFETY

Water recreation is both fun and therapeutic. However, it involves
inherent risks of injury and death. To reduce your risk of injury, read
and follow all product, package and package insert warnings and
instructions. Remember, however, that product warnings, instructions
and safety guidelines cover some common risks of water recreation,
but do not cover all instances or risk and or danger.

For additional safeguards, also familiarize yourself with the following
general guidelines as well as guidelines provided by nationally
recognized Safety Organizations:

• Demand constant supervision.

• Learn to swim.

• Take the time to learn CPR and first aid.

• Instruct anyone who is watching your children about potential pool
hazards and about the use of protective devices such as locked doors,
barriers, etc.

• Teach children what to do in case of an emergency.

• Always use common sense and good judgement when enjoying any
water activity.

• Supervise, supervise, supervise.

110

SAVE THESE INSTRUCTIONS

Page 18

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

PARTS LIST

Your Krystal Clear™ Filter-Pump has been manufactured using the highest quality
materials and workmanship. All Intex products have been inspected and found free of
defects prior to leaving the factory. This Limited Warranty applies only to the Krystal
Clear™ Filter-Pump.

The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for a period of two (2) years from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of
purchase will be required and must accompany warranty claims or the Limited Warranty is
invalid.

If a manufacturing defect is found within this two (2) years period, please contact the
appropriate Intex Service Center listed in this manual. The Service Center will determine
the validity of the claim.

IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY AND IN
NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR EMPLOYEES BE LIABLE
TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL
DAMAGES OR LIABILITIES.

This Limited Warranty does not apply if the Krystal Clear™ Filter-Pump is subject to
negligence, abnormal use or operation, accident, improper operation, improper voltage or
current contrary to operating instructions, or to damage by circumstances beyond Intex’s
control, including but not limited to, ordinary wear and tear and damage caused by
exposure to fire, flood, freezing, rain, or other external environmental forces. This Limited
Warranty applies only to those parts and components sold by Intex. The Limited Warranty
does not cover unauthorized alterations, repairs or disassembly by anyone other than Intex
Service Center personnel.

The Limited Warranty is also not applicable if this product is used with another product
other than an Intex product, when setting up your pool.

The costs associated with the loss of pool water, chemicals or water damage are not
covered by this warranty. Injury or damage to any property or person is not covered by this
warranty.

LIMITED WARRANTY

English

110

SAVE THESE INSTRUCTIONS

Page 19

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2009

English

AREAS LOCATION AREAS LOCATION

For service questions or to order replacement parts, please contact the appropriate office
listed below or visit www.intexdevelopment.com for answers to most frequently asked
questions.

• ARGENTINA JARSE INDUSTRIAL Y COMERCIAL S.A
MANUEL GARCIA Nº124, PARQUE PATRICO,
BUENOS AIRES, ARGENTINA
TEL: [phone] (interno 106);
TEL: [phone]( interno 145)
E-mail: Martín Cosoleto: [e-mail]
E-mail: Daniel Centurion: [e-mail]

• PERU COMEXA S.A.
AVENIDA COMANDANTE ESPINAR 142,
MIRAFLORES, LIMA, PERÚ
TEL: [phone]

• SAUDI ARABIA SAUDI ARABIAN MARKETING &
AGENCIES CO. LTD.
PRINCE AMIR MAJED STREET,
AL-SAFA DISTRICT. JEDDAH,
KINGDOM OF SAUDI ARABIA
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.samaco.com.sa

• AUSTRIA STEINBACH VERTRIEBSGMBH
AISTINGERSTRAßE 2
4311 SCHWERTBERG
TEL: [phone]
FAX: + 43 (7262) 61439
E-mail: [e-mail]
Website: www.intexcorp.at

• CZECH REPUBLIC / INTEX TRADING S.R.O.

EASTERN EUROPE BENESOVSKA 23,

101 00 PRAHA 10,
CZECH REPUBLIC
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• BELGIUM N.V. SIMBA-DICKIE BELGIUM S.A.
MOESKROENSESTEENWEG 383C,
8511 AALBEKE, BELGIUM
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
E-mail: [e-mail]

• DENMARK K.E. MATHIASEN A/S
SINTRUPVEJ 12, DK-8220
BRABRAND, DENMARK
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexnordic.com

• SWEDEN LEKSAM AB
BRANDSVIGSGATAN 6,
S-262 73 ÄNGELHOLM,
SWEDEN
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexnordic.com

• NORWAY NORSTAR AS
PINDSLEVEIEN 1,
N-3221 SANDEFJORD,
NORWAY
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexnordic.com

• FINLAND NORSTAR OY
SUOMALAISTENTIE 7,
FIN-02270 ESPOO,
FINLAND
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexnordic.com

• RUSSIA LLC BAUER
KIEVSKAYA STR., 20,
121165 MOSCOW, RUSSIA
TEL: [phone]/9802
FAX: [phone]
E-mail: [e-mail]
Website: www.intex.su

• POLAND KATHAY HASTER
UL. LUTYCKA 3, 60-415 POZNAN
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexpoland.pl

• HUNGARY RECONTRA LTD./RICKI LTD.
H-1113 BUDAPEST, DARÓCZI ÚT 1-3,
HUNGARY
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• BRASIL KONESUL MARKETING & SALES LTDA
RUA ANTONIO DAS CHAGAS,

1.528 - CEP. 04714-002,
CHÁCARA SANTO ANTONIO - SÃO
PAULO - SP - BRASIL
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• ISRAEL ALFIT TOYS LTD
MOSHAV NEHALIM,
MESHEK 32, 49950, ISRAEL
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• ASIA INTEX DEVELOPMENT CO. LTD.
8TH FLOOR,
DAH SING FINANCIAL CENTRE,
108 GLOUCESTER ROAD,
WANCHAI, HONG KONG
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexdevelopment.com

• EUROPE INTEX TRADING B.V.
POSTBUS 1075, 4700 BB ROOSENDAAL,
THE NETHERLANDS
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexcorp.nl

• FRANCE INTEX SERVICE FRANCE
(CASS INTEX FRANCE)
52, ROUTE NATIONALE,
39190 BEAUFORT, FRANCE
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intex.fr

• GERMANY STEINBACH VERTRIEBSGMBH
AN DER WELLE 4
60322 FRANKFURT
TEL: [phone]
FAX: + 43 (7262) 61439
E-mail: [e-mail]
Website: www.intexcorp.de

• ITALY A & A MARKETING SERVICE
VIA RAFFAELLO SANZIO
20058 VILLASANTA (MI)
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexitalia.com

• UK TOY BROKERS LTD
MARKETING HOUSE,
BLACKSTONE ROAD,
HUNTINGDON, CAMBS.
PE29 6EF. UK
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.intexspares.com

• SWITZERLAND GWM AGENCY
GARTEN-U. WOHNMÖBEL,
RÄFFELSTRASSE 25,
POSTFACH,
CH-8045 ZURICH/SWITZERLAND
TEL: [phone] or [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.gwm.ch

• SPAIN KOKIDO BVI LIMITED
C/ LAS MORERAS PARCELA 1 NAVES 7-10
POL. IND. CAMPORROSSO
28350 CIEMPOZUELOS.
MADRID
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• PORTUGAL KOKIDO BVI LIMITED
AVENIDA ANTÓNIO AUGUSTO AGUIAR,
Nº163 - 5ºDTº
1050-014 LISBOA
PORTUGAL
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• AUSTRALIA HUNTER OVERSEAS PTY LTD
LEVEL 1, 225 BAY STREET,
BRIGHTON, VICTORIA,
AUSTRALIA
TEL: [phone] or 1800-224-094
FAX: [phone]
E-mail: [e-mail]
Website: www.hunteroverseas.com.au

• NEW ZEALAND HAKA NEW ZEALAND LIMITED
UNIT 4, 11 ORBIT DIVE, ALBANY,
AUCKLAND 0757, NEW ZEALAND
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• MIDDLE EAST FIRST GROUP INTERNATIONAL

REGION AL MOOSA GROUPBUILDING, 1ST

FLOOR, OFFICE 102 & 103, UMM HURAIR
ROAD, KARAMA, DUBAI, UAE
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Website: www.firstgroupinternational.com

• SOUTH AFRICA WOOD & HYDE
15-17 PACKER AVENUE, INDUSTRIA2,
CAPE TOWN, SOUTH AFRICA 7460
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]

• CHILE / URUGUAY COMEXA S.A.
EL JUNCAL 100, PARQUE INDUSTRIAL PORTEZUELO,
QUILICURA, SANTIAGO, CHILE.
TEL: [phone]
E-mail: [e-mail]

WEEE IO ELECTRIC PRODUCT 7.5” X 10.3”

Correct Disposal of this product

This marking indicates that this product should not be disposed with

other household wastes throughout the EU.To prevent possible harm to

the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and

collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe recycling.

Elimination appropriée du produit

Ce symbole signifie que ce produit ne doit pas être jeté avec les autres

déchets ménagers dans l’Union européenne. Pour éviter tout dommage

potentiel pour l’environnement ou la santé humaine résultant d’un dépôt

incontrôlé de ce déchet, le recycler afin de favoriser une réutilisation

durable des ressources matérielles. Pour rapporter votre appareil usagé,

merci d’utiliser les systèmes de retour et de collecte ou de contacter le

détaillant qui vous a vendu ce produit.

Deshacerse de los residuos de este producto

Esta etiqueta indica que este producto no podrá ser eliminado en la

basura normal. Para prevenir posibles agresiones a la salud y al medio

ambiente consulte donde deshacerse del producto según la normativa

de su país. Para desechar el artículo utilice sistemas de reciclado o

contacte con el minorista donde lo compro.

Korrekte Entsorgung dieses Produkts

Innerhalb der EU weist dieses Symbol darauf hin, dass dieses Produkt nicht über

den Hausmüll entsorgt werden darf. Altgeräte enthalten wertvolle recyclingfähige

Materialien, die einer Wiederverwertung zugeführt werden sollten und um der Umwelt

bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu

schaden. Bitte entsorgen Sie Altgeräte deshalb über geeignete Sammelsysteme oder

senden Sie das Gerät zur Entsorgung an die Stelle, bei der Sie es gekauft haben.

Diese wird dann das Gerät der stofflichen Verwertung zuführen.

Smaltimento corretto del prodotto

Il presente simbolo indica che questo prodotto non deve essere smaltito

con gli altri rifiuti domestici nelle nazioni dell’Unione Europea. Per evitare

possibili effetti negativi sull’ambiente e sulla salute, riciclare

l’apparecchio per promuovere un riutilizzo sostenibile delle risorse

materiali. Per riconsegnare l’apparecchio usato, utilizzare i sistemi di

raccolta e restituzione della ditta produttrice presso la quale il prodotto è

stato acquistato. La ditta produttrice si preoccuperà di riciclare il prodotto

in maniera sicura per l’ambiente.

Correcte Verwijdering van dit product

Deze markering duidt erop dat dit product niet kan worden verwijderd met andere

huishoudelijk afval binnen de EU. Om mogelijke schade aan het milieu of de menselijke

gezondheid door ongecontroleerde afvalverwijdering te voorkomen, recycle deze op een

verantwoordelijke manier om een houdbare hergebruik van materiele rijkdommen te

stimuleren. Om uw gebruikte apparaat terug te brengen, gebruik de terugbreng- en

verzamelpunten of neem contact op met de winkelier waar het product is aangekocht. Zij

kunnen dit product terugnemen voor mileuveilige recycling.

Descarte correto deste produto

Está marca indica que este produto não deveria ser descartado com

outros aparelhos domésticos em toda UE. Prevenir possíveis danos ao

ambiente ou a saúde humana do descontrole do descarte, e recicla para

promover responsavelmente o sustentável re-uso das fontes materiais.

Devolva seu dispositivo usado, favor usar o sistema de coletas ou

contate a loja onde o produto foi comprado. Eles podem levar este

produto para reciclagem e para segura ambiental.

Korrekt bortskaffelse af dette produkt

Denne markering indikere at dette product ikke burde bortskaffes

sammen med anden husholdnings skrald igennem EU. For at forhindre evt.

miljøskader eller menneskelige skader fra ukontrolleret affaldsbortskaffelse,

genbruge det ansvarligt for at promovere bæredygtig genbrug af materiale

resourcer. For at returnere dit brugte apparat, venligst bruge returnerings og

kollektions systemer eller kontakte butikken hvor produktet var købt. De kan

tage produktet til miljøvenligt genbrug.

Σωστη απορριψη αυτου του προιοντος

Αυτη η σηµανση οριζει οτι αυτο το προιον δεν θα πρεπει να απορριπτεται µε οικιακα

απορριµατα σε ολη την Ευρωπαικη Ενωση. Για να αποτρεψετε τη µολυνση του περιβαλλοντος

η βλαβες στην ανθρωπινη υγεια απο µη ελεγχοµενη απορριψη απορριµατων, ανακυκλωστε το

υπευθυνα για να

προωθησετε την οικολογικη επαναχρησιµοποιηση των υλικων πηγων. Για να

επιστεψετε τη χρησιµοποιηµενη σας συσκευη, παρακαλω ακολουθηστε τα συστηµατα

επιστροϕης και συλλογης η επικοινωνηστε µε το καταστηµα απο οπου το προµηθευτηκατε.

Μπορουν να ανακυκλωσουν ασϕαλως αυτο το προιον.

и‡‚ЛО¸М‡fl ЫЪЛОЛБ‡ˆЛfl ‰‡ММУ„У ЛБ‰ВОЛfl

С‡ММ‡fl П‡НЛУ‚Н‡ ЫН‡Б˚‚‡ВЪ М‡ ЪУ, ˜ЪУ ЛБ‰ВОЛВ МВ ‰УОКМУ ЫЪЛОЛБЛУ‚‡Ъ¸Тfl ‚ПВТЪВ Т

УТЪ‡О¸М˚ПЛ ·˚ЪУ‚˚ПЛ УЪıУ‰‡ПЛ ФУ ‚ТВПЫ Цл. СОfl ФВ‰УЪ‚‡˘ВМЛfl ‚УБПУКМУ„У

ФЛ˜ЛМВМЛfl ‚В‰‡ УНЫК‡˛˘ВИ Т‰ ЛОЛ Б‰УУ‚¸˛ ˜ВОУ‚ВН‡ УЪ МВНУМЪУОЛЫВПУИ

ЫЪЛОЛБ‡ˆЛЛ УЪıУ‰У‚ ФУ‰‚В„МЛЪВ В„У У·flБ‡ЪВО¸МУИ ВˆЛНЫОflˆЛЛ ‰Оfl ФУ‰‰ВК‡МЛfl

‡ˆЛУМ‡О¸МУ„У ФУ‚ЪУМУ„У ЛТФУО¸БУ‚‡МЛfl П‡ЪВЛ‡О¸М˚ı ВТЫТУ‚. СОfl ВˆЛНЫОflˆЛЛ

‚‡¯В„У ЛТФУО¸БУ‚‡ММУ„У ЫТЪУИТЪ‚‡ ЛТФУО¸БЫИЪВ ТЛТЪВП˚ ВˆЛНЫОflˆЛЛ Л Т·У‡ ЛОЛ

У·‡ЪЛЪВТ¸ ‚ УБМЛ˜М˚И П‡„‡БЛМ, ‚ НУЪУУП ‰‡ММУВ ЛБ‰ВОЛВ ·˚ОУ ФЛУ·ВЪВМУ. йМЛ

ÏÓ„ÛÚ ÔËÌflÚ¸ ‰‡ÌÌÓ ËÁ‰ÂÎË ‰Îfl Ôӂ‰ÂÌËfl ·ÂÁÓÔ‡ÒÌÓÈ ‰Îfl ÓÍÛʇ˛˘ÂÈ Ò‰˚

ˆËÍÛÎflˆËË.