Intex 3 IN 1 VALVE Instructions Manual

(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 04/26/2016

(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 04/26/2016

3 IN 1 VALVE INSTRUCTION

WARNING

Infants have suffocated on inflatable mattresses. Never place infant aged

•

birth to 15 months to sleep on this inflatable air mattress / air bed. Infants
can suffocate on an underinflated or deflated mattress, on bedding , by
co-sleeping with another person, and by entrapment between the mattress
and bed frame or between the mattress and a vertical surface.

Children can be entrapped between the inflatable mattress and an adjacent

•

vertical surface. Provide at least a shoulder width space between the
inflatable mattress/airbed and adjacent vertical surfaces such as walls,
dressers or other objects.

Always keep the inflatable mattress fully inflated when in use.

•

Optional inflation cap

Quick-inflation cap

Quick-inflation cap O-ring

Quick-exhaust cap

TO INFLATE
WITH QUICK-INFLATION VALVE

1. Ensure the quick-exhaust and
the optional inflation caps are
securely tightened.

2. Turn the quick-inflation cap fully
counterclockwise. See Fig 1-a.

3. Pull the quick-inflation cap to
open. See Fig 1-b.

4. Insert the inflation opening of
an air pump directly into the
quick-inflation valve. See Fig 2.

5. Inflate the product to approximately
80% of desired firmness.

CAUTION: To prevent bursting,
do not over inflate or use high
pressure air compressor.

Quick-exhaust cap O-ring

Rubber diaphragm

a

b

Fig 1

Fig 2

69PO

6. Align the two “ “ on the cap
with the arrows on both side of
the quick-exhaust cap tabs and
push in firmly. See Fig 3-a.

7. Turn the quick-inflation cap fully
clockwise to close. See Fig 3-b.

TO INFLATE
WITH OPTIONAL INFLATION VALVE

8. Ensure the quick-exhaust and
the quick-inflation caps are
securely tightened.

9. Pull the optional inflation cap
tab to open. See Fig 4.

10. Insert the nozzle of an air pump
into the inflation valve. See Fig 5.

11. Inflate the product to
approximately 80% of desired
firmness.

CAUTION: To prevent bursting,
do not over inflate or use high
pressure air compressor.

12. Close the optional inflation cap
securely after inflation. See Fig 6.

TO ADJUST

13. If the product is too firm, open
the quick-inflation cap, repeat
steps #2 and #3.

14. Gently press one of the 3
protruding tabs on the
quick-inflation valve to release a
small amount of air.

CAUTION: Do not bend or
fold down the black rubber
diaphragm.

15. When the desired firmness is
achieved, replace the quick­ inflation cap back. See Fig 3.

See Fig 7.

69PO

a

b

Fig 3

Fig 4

Fig 5

Fig 6

Fig 7

SAVE THESE INSTRUCTIONS

Page 1

069-*PO-R0-1704

SAVE THESE INSTRUCTIONS

Page 2

TO DEFLATE

16. Press the two tabs inwards on
each side of the quick-exhaust
cap and pull outwards to open.
See Fig 8 - 9.

(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 04/26/2016

69PO

Fig 8

Fig 9

17. For packaging purpose, you
may use an air pump to remove
the remaining air completely
from the airbed. See Fig 10.

Fig 10

CLICK

"CLICK"

a

"CLICK"

b

Fig 11

18. When the product is completely deflated, replace the quick-exhaust cap back.
See Fig 11-a & 11-b.

IMPORTANT: Press down both tabs to ensure the "quick-exhaust cap"
is firmly secured onto the sitting base. Notice the "CLICK" sound from
both tabs.

©2016 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/

Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

EuropeanUnionby/Distribuédansl’UnionEuropéennepar/DistribuidoenlauniónEuropeapor/VertriebinderEuropäischenUniondurch/

�

Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com

Intex Marketing Ltd. to/à/a/an Intex

Consumer Service 1-800-234-6839

•Distributedinthe

Intex Trading B.V.,

SAVE THESE INSTRUCTIONS

Page 3