InterTest XBC-KZ33, EM13920, EM13921 Operating Manual

XBC-KZ33

Block Camera

Part No.
EM13920
EM13921

Revision History

Revision History

Date Version Contents

2018.02.09 V1.0.0 Release Document

2017.09.01 V1.0.0 Release Document

2 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

TABLE OF CONTENTS

----------------------------------------------------

3

FEATURES

----------------------------------------------------

4

PRECAUTION

----------------------------------------------------

5

SPECIFICATIONS

----------------------------------------------------

6

OSD & MENU

----------------------------------------------------

9

DIMENSION

----------------------------------------------------

16

INTERFACE

----------------------------------------------------

17

FUNCTIONS

----------------------------------------------------

22

COMMAND LIST

----------------------------------------------------

28

TABLE OF CONTENTS

Table of Contents

3www.intertest.com Operating Manual

Features

F

EATURES

This Product is a high performance CCTV camera
with built-in 33x optical zoom and 12x digital
zoom technologies. This product can be applied to
various fields such as security camera for
surveillance (CCTV camera), data viewer, Video
presenter(VP) and speed dome camera

•

This camera uses a 1/2.8” 2.13M Exmor R CMOS
Image Sensor that supports FULL HD (high
definition) to produce high-quality images.

•

Using progressive scan, images with a wide
dynamic range can be obtained with the newly
developed image signal processor (Wide
Dyn

amic Ra

•

The camera is equipped with a bright zoom lens
with 33× optical zoom and F1.6 aperture (optical
zoom + digital zoom = 396×)

•

Low-noise images can be obtained even in low­light environments using the Noise Reduction

nge function, WDR).

•

A Motion Detection function is available.

•

A title composed of up to 21 lines can be set
for displaying on the screen. 30 characters can
be used on one line (VISCA).

•

Support 256 internal zoom/focus presets.

•

Digital Image Stabilizer function reduces image
blurring caused by vibration.

•

Output format
HD-SDI/EX-SDI(V1.0)/LVDS/CVBS/AHD/TVI

•

LVDS output mode can be set.
Single / Dual output

function(3DNR/2DNR)

•

Video signals can be output as digital only.
Depending on register settings, you can select
from a variety of digital output methods:
1080p/60,1080p/50,1080p/30, 1080p/25,
720p/60,720p/50,720p/30, 720p/25, 1080i/60,
1080i/50

•

An infrared (IR) Cut-Filter can be disengaged
from the image path for incre
low light environments. The ICR will
automatically engage depending on the ambient
light, allowing the camera to be effective in
day/night environment.

•

A Privacy Zone Masking function (max. 16
blocks) is available.

ased sensitivity in

XBC-KZ33

4 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

P

RECUTION

Operation is subject to the following
conditions;

• This device may not cause harmful interference.

• This device must accept any interference

received, including interference that may cause
undesired operation.

• A regulated DC 12V 500mA power supply is
recommended for use with this camera for the
best image and the most stable operation.
An unregulated power supply can cause
damage to the camera. When unregulated
power supply is applied, product warranty will
be out of subject.

• If

it is used for CVBS application. It is
recommended that the camera is used with a
monitor that has a CCTV quality 75 Ohm video
impedance level. If your monitor is switched to
high impedance then please adjust accordingly.

• Do not attempt to disassemble the camera to
gain access to the internal components. Refer
servicing to tour dealer.

• Never face the camera towards the sun or any
bright or reflective light, which may cause
smear on the image and possible damage to the
CMOS.

• Do not remove the serial sticker for the w

arranty

service.

• Do not drop the thing or give a strong impact to
the product.

• Avoid the place where is so dusty, humid or
soot-covered. It may cause electric shock or fire.

• Do not expose to an intense light source such as
direct sunlight or spotlight. It may damage the
CMOS.

• If the camera operates more than 24 hours, It is

recommended that you execute the lens initial
action or reset the camera.

• Since the color representation differs depending

on the DVR, you have to select the type of DVR
to use in the menu

.

• When outputting video with CVBS, DVR

selection must be set to CVBS. When outputting
images using AHD / TVI DVR, you must select
the appropriate DVR.

P

RECUTION

Precaution

Operation is subject to the following
conditions;

• This device may not cause harmful interference.

• This device must accept any interference

received, including interference that may cause
undesired operation.

• A regulated DC 12V 500mA power supply is
recommended for use with this camera for the
best image and the most stable operation.
An unregulated power supply can cause
damage to the camera. When unregulated
power supply is applied, product warranty will
be out of subject.

• If

it is us
recommended that the camera is used with a
monitor that has a CCTV quality 75 Ohm video
impedance level. If your monitor is switched to
high impedance then please adjust accordingly.

• Do not attempt to disassemble the camera to
gain access to the internal components. Refer
servicing to tour dealer.

ed for CVBS application. It is

Information may be changed without notice

This document provides technical information for the user. KT&C reserves the right to modify the information in this
document as necessary. The customer should make sure that they have the most recent manual version.

• Never face the camera towards the sun or any
bright or reflective light, which may cause
smear on the image and possible damage to the
CMOS.

• Do not remove the serial sticker for the w
service.

• Do not drop the thing or give a strong impact to
the product.

• Avoid the place where is so dusty, humid or
soot-covered. It may cause electric shock or fire.

• Do not expose to an intense light source such as
direct sunlight or spotlight. It may damage the
CMOS.

• If the camera operates more than 24 hours, It is

recomme
action or reset the camera.

• Since the color representation differs depending

on the DVR, you have to select the type of DVR
to use in the menu

• When outputting video with CVBS, DVR

selection must be set to CVBS. When outputting
images using AHD / TVI DVR, you must select
the appropriate DVR.

nded that you execute the lens initial

.

arranty

5www.intertest.com Operating Manual

Format

ATC-HZ7833M-LA

ATC-HZ7833M-LT

Video System

Output Format

Sync System

Internal

HD-SDI / EX-SDI(V1.0) / CVBS / LVDS

HD-AHD

HD-TVI

Min. illumination

Optical Lens

Zoom

Focus

Infinity~1.5m(T)/0.1m(W)

Day & Night

White Balance

Auto / ATW / Indoor / Outdoor / Push / Manual

Exposure

SPECIFICATION

Specications

EM13921 EM13920

Image Sensor

Effective Pixels

CVBS scale

LVDS mode

Video Output

Day

Night (IR-cut filter on)
S/N ratio(AGC off , DSS off)

Zoom Magnification

Practical f-value

Practical Horizontal-Angle

Practical Vertical Angle

Practical Diagonal Angle

F-value

Maximum Zoom Ratio

Optical Zoom Ratio

Digital Zoom Ratio

Digital Pan/Tilt

Speed (Focus Tracking On)

(Focus Tracking Off)

1/2.8‛Exmor R CMOS (STARVIS)

2.13 million pixels (1945(H) x 1097(V))
LVDS/SDI/CVBS : 1080p60/50/30/25, 720p60/50/30/25, 1080i60/50
AHD : 1080p30/25 TVI: 1080p30/25, 720p30/25

16:9 / 4:3 (CVBS 720H)
Single / Dual

0.5 Lux @ F1.6

0.1 Lux @ F1.6
More than 52 dB

X33

4.6 to 152.0 mm

60.08°(W) ~ 2.08°(T)

35.32°(W) ~ 1.18°(T)

66.10°(W) ~ 2.46°(T)
F1.6(W ) ~ F4.8(T)

x1 ~ x396
x1 ~ x33
x1 ~ x12

-

5.0 ~ 50 sec

4.0 sec

Control Mode

IR correction

Focal Range

D&N mode

Night Color

AE mode

Brightness

AGC Limit

Manual Shutter

Manual AGC

Manual Iris

Sens-Up

ETC

Auto / Manual / Interval / One Shot(=Zoom Trigger, One Push)/PRESET
Standard/IR Light

Auto / Day (Color) / Night (BW) / External-H / External-L
Off/On

Auto / Shutter Priority / Iris Priority/ Manual/Bright
0~14

-3dB ~ 58dB
X32~x2,1/25(30)/1/50(60) ~ 1/30000

-3dB ~ 58dB
F1.6 ~ F19, Close
Off ~ 32fields
Spot AE, Slow AE response

6 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

OSD

English / Japanese / Russian / Spanish / German /France/ Portuguese / Chinese

DSP functions

Position Preset (zoom/focus)

Non-volatile 256 position(zoom/focus) presets.

Memory Preset

16-presets & custom preset

HD-SDI UCC

ATC-HZ78xxxxU model only

HD- UTC

AHD UTC

TVI UTC (PelcoC/HikvisionC)

Communication (UART)

Power

Physical

Temperature& Humidity

Format ATC-HZ7833M-LA ATC-HZ7833M-LT

EM13921 EM13920

Digital Slow Shutter

Image Freeze

Image Reverse (E-FLIP)

Privacy Masking

Title Display

Motion Detect

D-WDR

(NOTE1)

WDR

BLC

HLC

AGC

Sharpness

3DNR

2DNR

Defog

Gamma

Lens Shading

Defect Detection

Digital Image Stabilizer

Picture Effect

Max. 32 fields
Off / On
Off / Horizontal(mirror) / Vertical / H+V(180° flip)
Spherical Privacy

- 16-zone

- Interlock / Non-Interlock Mask

- 14 mask color selectable, semi-transparency

- Pan(0°~360°), Tilt(+90°~-90°)
16 characters (display position selectable)
4-Zone

- Alarm output : OSD / Serial Communication
Off / Low/Middle/High
WDR (Low/Middle/High)
Off / On, Area selectable
Off / 0 ~ 20, Color selectable
Max. 58dB
Adjustable(0~10)
Off/On(1~5)
Auto/Manual(Weight High/Low)
Off / Low / Middle / High

0.45/0.50/0.55/0.60/0.65/0.70/0.75
Off / Low / Middle / High
Support
On / Off
Negative/Positive, Blanck&White(Monochrome Image)

Camera ID

Remote Control

Control Protocol

Communication Speed

Supply Voltage

Supplied Current(motor on)

Consumption (motor on)

Dimension (WxHxD) [mm]

Weight

Operating condition

Storage condition

(NOTE1)

When CVBS is connected, WDR automatically turns off and Digital WDR operates.

0~255
RS-232 TTL +3.3V (+5.0V Compatible) / RS485
VISCA /Pelco-D/Pelco-P/HITACHI : automatically detection
2400/4800/9600(default)/19200/38400/57600/115200bps selectable

DC 12V (+7.0V ~ +15V)
260mA(430mA)

3.2W(5.2W)

50.0x58.8x95.8
260g

Temperature (-10°C~50 °C / 14°F~122°F), Humidity (20% ~ 80%)
Temperature (-20°C~60 °C / -4°F~140°F), Humidity (20% ~ 95%)

7www.intertest.com Operating Manual

INTERFACE SUMMARY

Interface & Video

ATC-HZ7833M-LA

ATC-HZ7833M-LT

(USL00-30L-C, 0.4mm)

(52207-0985, 1.0mm)

3pin External D&N

2pin RS-485

ATC-HZ7833M-LA (1/2.8‛)

ATC-HZ7833M-LT (1/2.8‛)

EX-SDI (V1.0) O O
HD-SDI O O

Video
Output

HD-TVI O
HD-AHD O
CVBS O O
LVDS

30pin Micro Coaxial

EM13921 EM13920

◎ ◎

◎ ◎

24pin FFC

(SFV24R-1STE1HLF, 0.55mm)

9pin FFC

Interface

(SM03B-SRSS-TB, 1.0mm)

3pin AHD/TVI

(53261-0371, 1.25mm)

(53261-0271, 1.25mm)

O O

O O

O O

O O

MMCX O O

◎ : Main Video Output / Main Control Connector

EM13921 EM13920

8 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

OSD & MENU

OSD & Menu

MAIN MENU

FOCUS [ ]
EXPOSURE [ ]
WHITE BALANCE [ ]
WDR/BLC [ ]
DAY&NIGHT [ ]
IMAGE [ ]
SPECIAL [ ]
FACTORY DEF OK
EXIT

SIZE & POSITION

RETURN : [SET] KEY

FOCUS

AF MODE AUTO
D-ZOOM ON
ZOOM START x1
ZOOM STOP x120
ZOOM SPEED 6
FOCUS LIMIT 1M
AF INTERVAL 1min
HOME POSITION OFF
PRESET POSITION [ ]
PRESET MARGIN 10
INITIAL OK
RETURN

UP/DOWN : move cursor
LEFT/RIGHT : change data, enter to submenu
SET (or IRIS OPEN) : used for SET key

▶ FACTORY DEF : factory default setting

It changes the entire menu in the initial state except ‚SYSTEM‛ menu

items.

Adjust SIZE or POSITION.

- CAM TITLE POSITION MENU

- CAM ID POSITION MENU

- ZOOM MAG POSITION MENU

- PRIVACY MASK PAN/TILT POSITION MENU

- PRIVACY MASK SIZE MENU

- FOCUS PRESET POSITION SETTING MENU

Setting Zoom/Focus function

▶AF MODE : AUTO/ONE SHOT/INTERVAL/MAMUAL/PRESET
▶DIGITAL ZOOM : OFF/ON
▶ZOOM START/STOP
▶ZOOM SPEED : 0~7
▶FOCUS LIMIT : 10CM~INF, focus near limit.
▶AF INTERVAL :1min~10min

Auto Focus interval when AF INTERVAL mode

▶HOME POSITION : OFF/ON

Go to X1 position when power on.

▶PRESET POSITION : Select target position for PRESET AF
▶PRESET : Select PRESET auto focusing range, 4~255

(*)See. “FUNCTIONS”

9www.intertest.com Operating Manual

MODE

AUTO

IRIS.P

SHUT.P

MANUAL

FLICKERLESS

O X X

X

IRIS X O X O

SHUTTER

X X O

O

AGC X X X O

AGC MAX

O O O

X

SENS UP

O O O

O

WDR O X X X

EXPOSURE

AE MODE AUTO
FLICKERLESS OFF
IRIS F4.8
SHUTTER 1/30
AGC 32dB
AGC MAX 32dB
SENS UP X32
BRIGHTNESS 8
INITIAL OK
RETURN

WHITE BALANCE

WB MODE AUTO
PUSH AUTO [ ]
COLOR GAIN 5
RED GAIN 10
BLUE GAIN 10
INITIAL OK
RETURN

WDR/BLC

MODE BLC
LEVEL 5
BLC X-POSITION 7
BLC Y-POSITION 6
BLC X-SIZE 4
BLC Y-SIZE 5
COLOR BLACK
INITIAL OK
RETURN

Setting Auto Exposure function.

▶AE MODE : AUTO/IRIS.P/SHUT.P//MANUAL

▶IRIS : F1.2~CLOSE, Select Manual Iris Value
▶SHUTTER : X32~X2,1/30,~,1/30000, Manual Shutter Speed
▶AGC : -3dB~58dB, Manual Gain Value
▶ AGC MAX : -3dB ~ 58dB, AGC maximum rate
▶SENS UP : OFF,X2,X4,X8,X16,X32, Slow Shutter value
▶BRIGHTNESS : 1~14, Image Brightness

Setting Auto White Balance Function.
▶WB MODE :

AUTO/INDOOR/OUTDOOR/ATW/ONE PUSH/MANUAL
AUTO : Automatically adjusts color
INDOOR / OUTDOOR : Set color temperature to be inoor/outdoor light
ATW : Auto Trace White balance
ONE-PUSH : fix the color if pressed PUSH button
MANUAL : Adjust color manually.

▶PUSH AUTO : if WB mode is ONE PUSH
▶COLOR GAIN : 0~20, adjust chroma gain
▶RED/BLUE GAIN : 0~255, adjust manual Red/Blue gain

Setting WDR/BLC/HLC function
▶WDR/BLC MODE : OFF/BLC/HLC/WDR
BLC : Backlight Compensation mode

HLC : Highlight Compensation mode
WDR : Wide Dynamic Range mode

▶LEVEL : adjust HLC/WDR Level
HLC : 0~20

WDR : LOW/MIDDLE/HIGH

▶BLC X- POSITION : adjust BLC X-window position
▶BLC Y- POSITION : adjust BLC Y-window position
▶BLC X-SIZE : adjust BLC X-window size
▶BLC Y-SIZE : adjust BLC Y-window size
▶HLC COLOR : BLACK/WHITE/YELLOW/CYAN/GREEN/MAGENTA/

RED/BLUE

◆

(Caution !!!)
WDR is available if AE MODE is AUTO.

10 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

DAY&NIGHT

MODE AUTO
DWELL TIME 5sec
DAY->NIGHT 28
NIGHT->DAY 4
IR SMART 0
INITIAL OK
RETURN

IMAGE

SHARPNESS 8
GAMMA 0.50
MIRROR OFF
FREEZE OFF
D-WDR OFF
DEFOG [ ]
DNR [ ]
DIS [ ]
EFFECT [ ]
INITIAL OK
RETURN

DEFOG

MODE ON/OFF ON
MODE AUTO
LEVEL MIDDLE
RETURN

Setting Day&Night Function

▶MODE : AUTO/DAY/NIGHT/EXT-H/EXT-L
▶DWELL TIME : 0~20sec
▶DAY->NIGHT : 1~28
▶NIGHT->DAY : 0~27
▶NIGHT COLOR : BW/COLOR

Select color at night condition.
▶IR SMART : 0~20

Setting Image Function

▶SHARPNESS : 0~15
▶GAMMA : 0.45/0.50/0.55/0.60/0.65/0.70/0.75
▶MIRROR : OFF/H-MIR/V-MIR/HV-MIR
▶FREEZE : OFF/ON
▶D-WDR : OFF/LOW/MIDDLE/HIGH
▶Defog : Setting Defog
▶DNR : Setting Digital Noise Reduction
▶DIS : Setting Digital Image Stabilization
▶EFFECT : Setting Digital Effects

Setting Defog

▶MODE ON/OFF : OFF/ON
▶MODE : AUTO/MANUAL
▶LEVEL : LOW/MIDDLE/HIGH

11www.intertest.com Operating Manual

(1) Low frequency area
The difference between
previous frame (frequency)

2DNR Weight

(1) (2) (3)

DNR

3DNR 1
2DNR MODE AUTO
2DNR WEIGHT-H 250
2DNR WEIGHT-L 0
RETURN

Setting Digital Noise Reduction

▶3DNR : OFF/1~5, 3DNR weight
▶2DNR MODE : AUTO/MANUAL
▶2DNR WEIGHT-H : 2DNR MANUAL High frequency weight
▶2DNR WEIGHT-L : 2DNR MANUAL Low frequency weight

High

Low

DIS

MODE OFF
RANGE 30%
FILTER MIDDLE
AUTO C HALF
RETURN

EFFECT

PIC.EFFECT OFF
HR MODE OFF
RETURN

(2) Excluded area when 2DNR manual mode
(3) High frequency area

Setting Digital image stabilization

▶MODE : OFF/ON
▶RANGE : 10%/20%/30%
▶FILTER : LOW/MIDDLE/HIGH
▶AUTO C : OFF/HALF/FULL

Setting Digital Effect function

▶PIC.EFFECT : OFF/NEGATIVE/BW
▶HR MODE : OFF/ON

High Resolution mode

12 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

SPECIAL

CAM TITLE [ ]
DISPLAY [ ]
PRIVACY [ ]
MOTION [ ]
SYSTEM [ ]
INITIAL OK
RETURN

CAM TITLE

↓

TITLE: _ _ _ _ _ _ _ _ _ _ _ _

ABCDEFGHIJKLMNOP
QRSTUVWXYZ! – ( ) [ ]
0123456789? * : ‚ / .
SPA>> <<BAK

DISPLAY OFF
LOCATION
RETURN

DISPLAY

CAM ID DISP ON
CAM ID POS
ZOOM MAG DISP ON
ZOOM MAG POS
INITIAL OK
RETURN

Setting Special Functions

▶ CAM TITLE : edit camera title
▶ DISPLAY : select display mode
▶ PIRVACY : adjust privacy mask status
▶ MOTION : adjust motion detect function
▶ SYSTEM : system setting
▶ INITIAL : (!!!) SYSTEM menu is NOT initialized.

Setting Camera Title

[ Title Edit ]
UP/DOWN : move cursor up&down
LEFT/RIGHT : move cursor left&right
SET (or IRIS OPEN) : select cursor character.

▶DISPLAY : OFF/ON, enable/disable title display
▶LOCATION : adjust TITLE display position

Setting On Screen Display

▶CAM ID DISP : OFF/ON, Camera ID display mode
▶CAM ID POS : Camera ID display position setting
▶ZOOM MAG DISP : OFF/ON
▶ZOOM MAG POS : Zoom ration display position setting

13www.intertest.com Operating Manual

Two messages are output when APPLY is executed.

original state.

PRIVACY

MODE ON
ZONE NO 1
DISPLAY ON
P/T LOCK ON
POSITION ON
ZONE SIZE
COLOR BLACK
TRANSPARENCY 25%
ZONE RESET
INITIAL OK
RETURN

MOTION

MODE ON
ZONE NO 1
ZONE DETECT ON
X-POSITION 1
Y-POSITION 1
X-SIZE 58
Y-SIZE 32
SENSITIVITY MIDDLE
ALARM MODE TEXT
INITIAL OK
RETURN

SYSTEM

LANGUAGE ENGLISH
FRAMERATE 1080_60p
DVR STANDARD
APPLY [ ]
CVBS 16:9
LVDS MODE SINGLE
IR LED NO
DEFECT DET [ ]
COLOR [ ]
COM [ ]
RETURN

Setting Spherical Privacy mask

▶MODE : OFF/ON, Privacy mask enable/disable
▶ZONE NO : 1~24, Privacy mask zone number
▶ZONE DISPLAY : OFF/ON, current mask zone display on/off.
▶P/T INTERLOCK : interlocking Pan&Tilt.
▶POS.ZOOM : select zoom position.

[LEFT] zoom out, [RIGHT] zoom in

▶POS.PAN/TILT : select pan/tilt position.(if P/T INTERLOCK OFF)
▶ZONE SIZE : select mask zone width&height.
▶COLOR : select mask zone color, BLACK,GRAY1~6,WHITE,RED,

GREEN,BLUE,CYAN,YELLOW,MAGENTA

▶TRANSPARENCY : select transparent level. OFF/25%/50%/75%
▶ZONE RESET : reset the mask size, zoom, pan, tilt postion.

Setting Motion Detect

▶MODE : OFF/ON, Enable/disable the Motion Detection.
▶ZONE NO : 1~4, select the motion detection window.
▶ZONE DETECT : OFF/ON, select the detection mode of current zone.
▶X-POSITION : adjust motion detect zone X-position.
▶Y-POSITION : adjust motion detect zone Y-position.
▶X-SIZE : adjust motion detect zone X-size.
▶Y-SIZE : adjust motion detect zone Y-size.
▶SENSITIVITY : 0~10, select the motion detect sensitivity level.
▶ALARM MODE: OFF/OSD/TEXT/OSD+TEXT, select the display

method if motion is detected.

Setting System Function
▶LANGUAGE : English / Japanese / Russian / Spanish / German /France/
Portuguese/ Chinese
▶FRAMERATE : 1080_60p/1080_50p/1080_30p/1080_25p/
720_60p/720_50p/720_30p/720_25p/1080_60i/1080_50i

▶DVR : Select DVR model. (*) See. “Supported DVRs"
▶APPLY : apply the <FRAMERATE>,<DVR> settings.

The first message is a message that is output before the status is
changed, and the second message is a message that is output after the
status is changed.
If the status is changed, the image may not be output. In this case, if
you wait 20 seconds without any keystroke, it will be restored to its

▶CVBS : 16:9 / 4:3, select CVBS scale
▶LVDS MODE : SINGLE/DUAL(=double)
▶IR LED : YES(use IR LED at night) /NO
▶DEFECT DET : defect detection
▶COLOR : Adjust R/B gain, R/B hue
▶COM : RS232 / RS485 communication Setting.

(!!!) All of the SYSTEM menu items are NOT initialized.

14 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

COLOR

BY_GAIN- 80
BY_GAIN+ 58
RY_GAIN- 68

Adjust Color Gain

▶ BY-GAIN ~ RY_HUE, R/G/B-GAIN : adjust color
GAIN : Chroma (saturation) value

HUE : Hue

RY_GAIN+ 44
BY_HUE- 224
BY_HUE+ 232
RY_HUE- 0
RY_HUE+ 128
RED GAIN 60
GREEN GAIN 50
BLUE GAIN 60
RESET
RETURN

COM

CAM ID 1
BAUDRATE 9600
APPLY
RETURN

(!!!) These values are NOT initialized.

<CbCr Plane>

(f.g) If you want to emphasize the GREEN color, adjust BY-GAIN- and RY­GAIN-.

Setting Serial Interface

▶CAM ID : 0~255
▶BAUDRATE: 2400/4800/9600/19200/38400/57800/115200 bps
▶APPLY : apply the <CAM ID>,<BAUDRATE> condition.

15www.intertest.com Operating Manual

Dimensions

DIMENSION

Zoom module (ATC-HZ7833M-LA/LT)

EM13921 / EM13920

16 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Interface

J304 (Micro Co- Axial) / KEL Co. USL00-30L-C

NO

Name

Description

1

TX_OUT3+

2

TX_OUT3-

3

TX_CLKOUT+

4

TX_CLKOUT-

5

TX_OUT2+

6

TX_OUT2-

7

TX_OUT1+

8

TX_OUT1-

9

TX_OUT0+

10

TX_OUT0-

11

GND

12

TXD

5.0V (compatible 3.3V)

13

RXD

5.0V (compatible 3.3V)

14

+12V DC

15

+12V DC

16

+12V DC

17

+12V DC

18

+12V DC

19

GND

20

GND

21

TX_OUT7+

Single out mode : open

22

TX_OUT7-

Single out mode : open

23

TX_OUT6+

Single out mode : open

24

TX_OUT6-

Single out mode : open

25

CVBS

CVBS output

26

RESET_IN

Reset:Low(GND),Normal(1.8V)

27

TX_OUT5+

Single out mode : open

28

TX_OUT5-

Single out mode : open

29

TX_OUT4+

Single out mode : open

30

TX_OUT4-

Single out mode : open

CN302 (External D&N) / JST : SM03B-SRSS-TB

NO

Name

Description

1

Ext_D&N

External D&N Input

2

GND

3

+3.3V

+3.3V Out (For Sensor)

HD-SDI

J305 / Molex 52207-0985

NO

Name

Description

1

GND

(Optional RS485EN or AD KEY)

2

AHD_OUT

HD-AHD OUTPUT

3

GND

4

CVBS

CVBS OUTPUT

5

GND

6

DC_IN

DC12V input

7

GND

8

TXD

5.0V (compatible 3.3V)

9

RXD

5.0V (compatible 3.3V)

CN304

(AD key External Circuit)

NO

Name

Description

1

AHD_OUT

HD-AHD output

2

GND

3

+12V_IN

DC 12V INPUT

CN301 (RS485) / 53261-0271

NO

Name

Description

1

TRX+

RS485 TRX+

2

TRX-

RS485 TRX-

CN301

2

1

J305

1 … 9

J304

1 … 30

CN302

1 2 3

PIN Assign (ATC-HZ7833M-LA 1/2.8”)

INTERFACE

EM13921

3 2 1

CN304 (AHD) / 53261-0371

MENU TELE WIDE NEAR FAR N.U.

17www.intertest.com Operating Manual

J304 (Micro Co- Axial) / KEL Co. USL00-30L-C

NO

Name

Description

1

TX_OUT3+

2

TX_OUT3-

3

TX_CLKOUT+

4

TX_CLKOUT-

5

TX_OUT2+

6

TX_OUT2-

7

TX_OUT1+

8

TX_OUT1-

9

TX_OUT0+

10

TX_OUT0-

11

GND

12

TXD

5.0V (compatible 3.3V)

13

RXD

5.0V (compatible 3.3V)

14

+12V DC

15

+12V DC

16

+12V DC

17

+12V DC

18

+12V DC

19

GND

20

GND

21

TX_OUT7+

Single out mode : open

22

TX_OUT7-

Single out mode : open

23

TX_OUT6+

Single out mode : open

24

TX_OUT6-

Single out mode : open

25

CVBS

CVBS output

26

RESET_IN

Reset:Low(GND),Normal(1.8V)

27

TX_OUT5+

Single out mode : open

28

TX_OUT5-

Single out mode : open

29

TX_OUT4+

Single out mode : open

30

TX_OUT4-

Single out mode : open

CN302 (External D&N) / JST : SM03B-SRSS-TB

NO

Name

Description

1

Ext_D&N

External D&N Input

2

GND

3

+3.3V

+3.3V Out (For Sensor)

HD-SDI

J305 / Molex 52207-0985

NO

Name

Description

1

GND

(Optional RS485EN or AD KEY)

2

TVI_OUT

HD-TVI OUTPUT

3

GND

4

CVBS

CVBS OUTPUT

5

GND

6

DC_IN

DC12V input

7

GND

8

TXD

5.0V (compatible 3.3V)

9

RXD

5.0V (compatible 3.3V)

3 2 1

(AD key External Circuit)

CN304 (TVI) / 53261-0371

NO

Name

Description

1

TVI_OUT

HD-TVI output

2

GND

3

+12V_IN

DC 12V INPUT

CN301 (RS485) / 53261-0271

NO

Name

Description

1

TRX+

RS485 TRX+

2

TRX-

RS485 TRX-

CN301

2

1

1 … 9

1 … 30

CN302

1 2 3

PIN Assign (ATC-HZ7833M-LT 1/2.8”)

EM13920

J304

CN304

J305

MENU TELE WIDE NEAR FAR N.U.

18 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

LVDS(single)

TX

RX

CAMERA

HD Digital Video Sync Signal

J303 (Micro Co- Axial)

Recommended LVDS receiver IC

Select LVDS output mode

LVDS interface (LVDS model only)

Y (8bits X 2)

Cb/Cr

HD

VD

FLD

CLK

THC63LVD827

(THINE Electronics Inc.)

TTL

Parallel

To

LVDS

KEL Co. USL00-30L-C

(5pairs / 10pin)

LVDS(double)

(5pairs / 10pin)

DC 12V

TXD
RXD

THC63LVD104C (Single only)
THC63LVD1024 (Single/Double)
(THINE Electronics Inc.)

Y (8bits X 2)

Cb/Cr

LVDS

To

TTL

Parallel

HD

VD

FLD

CLK

74.125MHz

(1) MENU
SPECIAL -> SYSTEM -> LVDS MODE : SINGLE/DUAL
(2) VISCA protocol

8x 01 04 24 74 0p 0q FF : pq=00 (single) / pq=01 (double)

(caution) If the frame rate is 25 fps / 30 fps, it works as SINGLE even if LVDS MODE is set to DUAL.

However, if the frame rate is 50 fps / 60 fps, LVDS MODE must be set to DUAL to operate as DUAL.

(1) Single Only : THC63LVD104C
(2) Single or Double : THC63LVD1024

19www.intertest.com Operating Manual

19

Single Mode : THC63LVD827 (THINE Electronics Inc.)

Output Format

Pixel Clock [MHz]

TCLK+ [MHz]

1080p60

148.5

148.5

1080p50

148.5

148.5

1080i60

74.25

74.25

1080i50

74.25

74.25

1080p30

74.25

74.25

1080p25

74.25

74.25

720p60

74.25

74.25

720p50

74.25

74.25

720p30

74.25

74.25

720p25

74.25

74.25

(THC63LVD827 IN)

* : ignore this value

LVDS Pixel Data Format (LVDS model only)

Pixel Clock

Pixel Data

(THC63LVD827 OUT)

TCLK1 +/-

TA1 +/-

TB1 +/-

TC1 +/-

TD1 +/-

*

* * Y7

C6

C7

Y6 Y5 Y4 Y6 Y5 Y4 Y3 Y2 Y1 Y0

0 0 0 0 0 0

C6 C5 C4 C6 C5 C4 C3 C2 C1 C0

0 0 0 0 0 0 0 0

20 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Double Mode : THC63LVD827 (THINE Electronics Inc.)

Output Format

Pixel Clock [MHz]

TCLK+ [MHz]

1080p60

148.5

74.25

1080p50

148.5

74.25

1080i60

74.25

37.125

1080i50

74.25

37.125

1080p30

74.25

37.125

1080p25

74.25

37.125

720p60

74.25

37.125

720p50

74.25

37.125

720p30

74.25

37.125

720p25

74.25

37.125

(THC63LVD827 IN)

1’st pixel 2’nd Pixel

* : ignore this value

Pixel Clock

Pixel Data

(THC63LVD827 OUT)

1’st pixel

2’nd pixel

TCLK1 +/-

TA1 +/-

TB1 +/-

TC1 +/-

TD1 +/-

TA2 +/-

TB2 +/-

TC2 +/-

TD2 +/-

(Odd) (Even)

* * Y7

*

0 0 C6

* * Y7

*

0 0 C6

C7

C7

Y6 Y5 Y4 Y6 Y5 Y4 Y3 Y2 Y1 Y0

0 0 0 0 0 0

* C5 C4 * C5 C4 C3 C2 C1 C0

0 0 0 0 0 0

Y6 Y5 Y4 Y6 Y5 Y4 Y3 Y2 Y1 Y0

0 0 0 0 0 0

* C5 C4 * C5 C4 C3 C2 C1 C0

0 0 0 0 0 0

21www.intertest.com Operating Manual

Auto Focus Near Limit

Auto Focus Mode

KT_PresetAF

Disp. Setting OSD

8x 01 70 02 00 FF

Cancel & Exit

Save & Exit

Set Preset AF Range

If FOCUS LIMIT = 5M

focusing area
(5m~infinite)

Non-focusing area
(1cm~5m)

FUNCTIONS FUNCTIONS

Functions

You can set the minimum focus distance from 1cm(or 10cm) to
infinite. It is available only at high magnification zoom
position.
This is called by FOCUS LIMIT or NEAR LIMIT or M.O.D
(Minimum object distance). This is mostly used to avoid
focusing on objects of close range.

● The PRESET AF mode is useful when you need to focus only
on objects of a specific distance that require little PAN / TILT
operation after installing the camera.

● The PRESET MARGIN is the AF operating range at the
maximum zoom scale. This range is automatically adjusted
according to the zoom magnification

< PRESET setting method – 1 >

(1) Enter MENU
(2) Change AF mode to PRESET
(3) Enter PRESET POSITION menu
(4) Move to maximum zoom scale (OK is displayed on the
screen)
(5) Adjust focus
(6) Exit PRESET POSITION menu
(7) Adjust PRESET MARGIN data (4~255)

● AUTO
When a change in the image is detected, the AF operation is
automatically performed.

● INTERVAL
It is used for AF movements carried out at particular
intervals.

● MANUAL
Adjust zoom and focus manually.

● ONESHOT
When the zoom is changed, auto focus is executed only once.
The AF range is from FOCUS LIMIT to infinity.
It is called by ‚ONE PUSH‛ or ‚ZOOM TRIGGER‛ mode.

● PRESET
Always focus on the specified subject. When the zoom is
changed, auto focus is executed only once. The AF range
(=PRESET MARGIN) is limited to a specific range.

Please go to X33 (X33) OK
Select Target : U/D/L/R
Save & Exit : SET(IRIS+)

(Preset Target Setting Screen)

< PRESET setting method – 2 >

Test PRESET

(1) If you want to output the PRESET POSITION setting
screen, send SETTING OSD command.
(2) To save the current zoom and focus position in the
PRESET position, send the SAVE & EXIT command. To end
without saving, send CANCEL&EXIT command.
(3) To save the current zoom and focus position to PRESET
position without outputting PRESET POSITION menu, send
SAVE & EXIT command.

8x 01 70 02 01 FF

8x 01 70 02 02 FF

8x 01 70 02 10 FF

8x 01 70 03 0p 0q FF

22 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Automatic Exposure Mode

Exposure Compensation

CAM_ExpComp

8x 01 04 4E 00 00 0p 0q
FF

pq=compensation level

Wide Dynamic Range (WDR)

High-Light Compensation (HLC)

Spot AE

CAM_SpotAE

On

8x 01 04 59 02 FF

Spot AE mode
Off

8x 01 04 59 03 FF

Position

8x 01 04 29 0p 0q 0r 0s FF

pq:X(0~F),
rs:Y(0~F)

Noise Reduction

Defog

• Full Auto mode
Iris, Gain, Shutter speed can be set automatically.

• Shutter Priority mode
Variable shutter speed : 1/1(X32)~1/30000
Auto Iris & Gain

• Iris Priority mode
Variable Iris : F1.6 ~ Close, 14steps
Auto Gain & Shutter

• Manual mode
Variable Iris/Shutter/Gain

• Bright mode
Variable Iris & Gain, F1.6~58dB
Shutter speed is maintained at the speed in FULL AUTO or
SHUTTER PRIORITY mode.
The “BRIGHT” mode can be switched to

“Full Auto” or

“Shutter priority” mode only.

(NOTE) See “Command Setting Values”

It is a function which offsets the internal reference brightness
level used in the AE mode.

(NOTE) See “Command Setting Values”

Images with WDR are produced by combining long-exposure
signals(normal shutter) with the signal of the high-intensity
portions obtained a short-exposure (high-speed shutter).

(NOTE1)

When CVBS is connected, WDR automatically turns off and

Digital WDR operates.

It's ability to reverse bright points in the picture to black. As
an effective approach to recognize vehicle plate number at
night, HLC function can detect any spotlight diffused by
object-vehicle and compensate it for obtaining clearer image.

• Available in Full Auto AE mode.

• A particular section of the subject can be designated, and
then that portion of the image can be weighted and a
value computed so that iris and gain can be optimized to
obtain an image.

               































WDR OFF WDR ON

• 3D-NR

• 2D-NR

• Sharpens cloudy images such as fog.

23www.intertest.com Operating Manual

Slow AE Response

CAM_AE_Response

8x 01 04 5D pp FF

pp: 01 to 30
default 01

Digital Image Stabilizer

Home Position Mode

KT_HomePow
e

On

8x 01 70 24 02 FF

Moving to x1 position

Off

8x 01 70 24 03 FF

Move to final position
before power off

Memory Preset

CAM_Memory

Reset

8x 01 04 3F 00 0p FF

p:Memory

Set

8x 01 04 3F 01 0p FF

Recall

8x 01 04 3F 02 0p FF

Custom Preset

CAM_Custom

Reset

8x 01 04 3F 00 7F FF

Starts up in this

Set

8x 01 04 3F 01 7F FF

Recall

8x 01 04 3F 02 7F FF

Inactive

8x 01 04 3F 10 7F FF

Active

8x 01 04 3F 11 7F FF

(NOTE)

(factory shipment default : Inactive mode)

User Memory Area

The Slow AE Response function allows you to reduce the

exposure response speed.
(example) If the headlights of a car are caught by the camera,
the camera automatically adjusts the exposure so that it can
shoot a high-intensity subject. Since AE responds slowly, it can
be prevent images from being shot.

This function reduces image blurring caused by vibration

• RANGE : Set the compensation range. Up to 30% of the
input image range is used, and digital zoom is required up to

1.4 times according to the setting.

• FILTER: Correction filter for the worst case of the image
(built-in Hold filter). If you increase the setting value, the
correction becomes less. If you decrease the setting value, the
correction becomes better. However, a malfunction may occur
in a moving subject or a low-illuminance / no-pattern image.

• AUTO C : Auto Centering to distinguish camera shake from
PANNIG. It compensates for high frequency vibrations such as
tremor and allows the screen to move naturally to the camera's
PANNING. In the case of FULL, the camera always corrects
the direction in which the image is positioned at the center of
the image. In the case of HALF, the center of the correction
area is complet

the periphery is centered.

ely corrected (PANNING is ignored) and only

16 sets of camera shooting conditions can be stored and
recalled.

• Zoom Position

• Digital Zoom Mode

• Focus Mode

• AE mode

• Shutter control parameters

• Bright , Iris, Gain

• Exposure Compensation mode

• Exposure Level

• Backlight Compensation mode

• Auto Slow Shutter On/Off

• White Balance mode

• Red/Blue Gain

• Aperture Control

• ICR mode, Defog, WDR mode

Number(0~F)

(See. Custom/Memory Preset Setting Items)

As with the memory preset function, the camera
shooting conditions can be saved and recalled. The
settings are recalled when the power is turned on.

• The above memory preset contents

• Privacy mask, Motion detect , Title

• Flip, mirror, negative, BW, Gamma, DNR, DIS, AF
controls, camera ID, HLC, ETC.

mode when the
power is turned on

(See. Custom/Memory Preset Setting Items)

You can decide whether to use a custom preset.
When the product is shipped, custom preset is disabled(inactive mode)

To enable the custom preset, the user must send SET/RECALL or
ACTIVE command.
To disable the custom preset, send INACTIVE command.

<Custom Preset Mode>
When the power is turned on,

- Active : starts up in the custom preset settings

- Inactive : starts up in the settings before the power is turned off

(before) (after)

After power on, you can choose whether to move to the last
position before power off or to x1 position.

rOn

You can use up to 16 bytes to store data such as camera
number.

24 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

______________________________________________________

KT_ZoomFocus
Preset

Set

8x 01 70 3F 01 0p
0q 0r FF

pqr : preset Number
(0x000~0x0FF)

Recall

8x 01 70 3F 02 0p
0q 0r FF

Clear

8x 01 70 3F 03 0p
0q 0r FF

Clear All Preset

8x 01 70 3F 0F 00

Clear all preset data

KT_ZoomFocus
PresetInq

8x 09 703F 0n 0n

nnn:preset number
(0x000~0x0FF)
v : 1(saved), 0(empty)
zzzz : zoom position
ffff : focus position

Day & Night Setting

KT_DayNightMod

Auto

8x 01 70 04 00 FF

Day

8x 01 70 04 01 FF

Night

8x 01 70 04 02 FF

Ext-High

8x 01 70 04 03 FF

Ext-Low

8x 01 70 04 04 FF

Day->Night(EXT-H)

8x 01 70 05 10 0p 0q FF

Night->Day(EXT-H)

8x 01 70 05 11 0p 0q FF

Day->Night(EXT-L)

8x 01 70 05 20 0p 0q FF

Night->Day(EXT-L)

8x 01 70 05 21 0p 0q FF

Motion Detect Function

On

8x 01 04 1B 02 FF

Motion Detection On/Off
Off

8x 01 04 1B 03 FF

Function

8x 01 04 1C 0m 0n

m: Display mode (when motion is

rs: Interval Time set (00 to FF)

Window

8x 01 04 1D 0m 0p

m: Select Detection Frame (0, 1, 2, 3)

s: Stop Vertical Position (01 to 08)

Alarm
(Reply)

y0 07 04 1B 0p FF

p: Detection Frame Number

MOTION!!!

Frame

Block

Text

Position Preset

The current zoom / focus position can be stored in the
internal memory and moved to that position if necessary.
A total of 256 locations can be stored.

0n FF

● AUTO Mode
If the current illumination is darker than the ICR ON level,
the IR cut filter is removed. If it is brighter than the ICR OFF
level, the IR cut filter is enabled.
ICR ON level = Day To Night level
ICR OFF level = Night To Day level

00 00 FF

y0 50 0v 0z 0z
0z 0z 0f 0f 0f 0f
FF

Motion Detect functions instructs the camera to detect
movement within monitoring area and then send an alarm
signal automatically.

◇ Frame

You can set up to 4-frames
Each frame can be set up :
Using VISCA : 16 (horizontally)×8 (vertically) blocks
Using MENU : 60 (horizontally)×34 (vertically) blocks

◇ Sending Alarms

• When motion is detected, the Alarm Replay
command is issued via the serial command (VISCA)
communication line.

• When multiple motions are detected or motion is
detected in another frame within the set interval
following the original time the alarm was issued,
another alarm command is not issued.

• When motion is detected after the interval time
elapsed, the alarm is issued again.

● DAY Mode (=ICR OFF fixed)
It always maintains the DAY (color) state regardless of the
current illumination.

● NIGHT Mode (=ICR ON fixed)
It always maintains the NIGHT (B/W) state regardless of the
current illumination.

● EXT-L/H Mode
DAY / NIGHT is determined according to the external input
signal.
In EXT-H mode, when the input signal level is greater than
DAY TO NIGHT LEVEL, it switches to NIGHT.
In EXT-L mode, if the input signal level is lower th a n DAY
TO NIGHT LEVEL, it switches to NIGHT.

(*3)

e

Set

Set

0p 0q 0r 0s FF

0q rr 0s FF

detected)
bit0 : frame display
bit1 : block display
bit2 : Text display

n: Detection Frame Set (0 to F)
bit0(frame1)~bit3(frame4)
pq: Threshold Level (00 to FF)

p: Start Horizontal Position (00 to 0F)
q: Start Vertical Position (00 to 07)
r: Stop Horizontal Position (01 to 10)

KT_ExtICRthresho

(*3)

ld

(*) Blocks are output only within the Frame area.

25

25www.intertest.com Operating Manual

Privacy Zone Masking

Command Set

Command

Command

Comments

CAM_PrivacyZone

SetMask

8x 01 04 76 mm nn

Setting Mask(Size)

and“rr: w, ss: h” in“Parameters”

Display

8x 01 04 77 pp pp pp pp

Setting Mask Display On/Off

pp pp pp pp: Mask setting (0: OFF, 1: ON)

SetMaskColor

8x 01 04 78 pp pp pp pp

Setting Color of Mask

to 0 rr: Color setting when setting the Mask

SetPanTiltAngle

8x 01 04 79 0p 0p 0p

Setting Pan/Tilt Angle

ppp: Pan angle, qqq: Tilt angle

SetPTZMask

8x 01 04 7B mm

Setting the direct position of PTZ

ppp: Pan , qqq: Tilt , rrrr: Zoom

Non_InterlockMask

8x 01 04 6F mm

Setting non-interlocking the mask to

and“pp:x,qq:y, rr:w, ss:

Inquiry Command

Command Packet

Inquiry Packet

Comments

CAM_Privacy

Inquiry about the status of Setting Mask Display
CAM_PrivacyPan

y0 50 0p 0p 0p 0q 0q

Inquiry about the pan/tilt position currently set

y0 50 0p 0p 0p 0q 0q

Inquiry about pan/tilt/zoom position at the mm

rrrr: Zoom

CAM_Privacy

Inquiry about the mask currently displayed

pp pp pp pp (mask bit) or mm(Mask list)

byte

pp

pp

pp

pp

bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

Mask - - - - - - - - - - - - P O N M - - L K J I H G - - F E D C B A

List(mm)

0F

0E

0D

0C

0B

0A

09

08

07

06

05

04

03

02

01

00

Privacy Zone masking protects private objects and areas
such as house windows, entrances, and exits which are
within the camera’s range of vision but not subject to
surveillance. Privacy zone masking can be masked on
the monitor to protect privacy.

•

Mask can be set on up to 16 places according to Pan/
Tilt positions.

•

Interlocking control with zooming.

•

Interlocking control with Pan/Tilt.

•

Non-interlocking control with Pan/Tilt.

DisplayInq

TiltInq

0r 0r 0s 0s FF

FF

qq rr FF

0q 0q 0q FF

0p 0p 0p 0q 0q 0q 0r 0r
0r 0r FF

0p 0p 0q 0q 0r 0r 0s 0s FF

8x 09 04 77 FF

8x 09 04 79 FF

y0 50 pp pp pp pp FF

0q FF

See “mm: Mask setting list”, “nn: Setting”,

See “pp pp pp pp: Mask bit” in“Parameters” .

See “pp pp pp pp: Mask bit” and“qq, rr: Color
code” in“Parameters”.
qq: Color setting when setting the Mask bit

See “Setting pan/tilt angle” in“Parameters”.

See “mm: Mask setting list” and“Setting
pan/tilt angle” in“Parameters”.

pan/till See “mm: Mack setting list”

On/ Off
See “pp pp pp pp: Mask bit” in“Parameters” .
1:On, 0:Off

See “Setting pan/tilt angle” in“Parameters”.
ppp: Pan, qqq: Tilt

CAM_PrivacyPTZI
nq

MonitorInq

• Mask Number : A=0x00, B=0x01,…W=0x16, X=0x17 (total 24 masks)

• Mask Bit & Mask List(mm)

The priority order of the mask display is in the sequence from A (highest) to P (lowest).

8x 09 04 7B mm FF

8x 09 04 6F FF

0q 0r 0r 0r 0r FF

y0 50 pp pp pp pp FF

Mask setting
See “mm: Mask setting list” and“Setting
pan/tilt angle” in“Parameters”.
ppp: Pan osition,
qqq: Tilt Position

See “pp pp pp pp: Mask bit” in“Parameters”.

26 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

• Pan/Tilt Angle

Mask (Color)

Normal

Translucence

Black

00h

10h

Gray1

01h

11h

Gray2

02h

12h

Gray3

03h

13h

Gray4

04h

14h

Gray5

05h

15h

Gray6

06h

16h

White

07h

17h

Red

08h

18h

Green

09h

19h

Blue

0Ah

1Ah

Cyan

0Bh

1Bh

Yellow

0Ch

1Ch

Magenta

0Dh

1Dh

Title / Function Display

KT_FontSize

Normal

8x 01 70 15 30 FF

Big

8x 01 70 15 31 FF

CAM_Display
On

8x 01 04 15 02 FF

Off

8x 01 04 15 03 FF

1080p/30 FLIP CAPTURE

1/1000

ID:001

X10

00

0A

Odd line : 00~0A

(11 lines)

Even line : 0B~14
(10 lines)

ID:001

X10

0

A

Line number
00~0A (11lines)

•

You can use the tilt angle at which you can set the mask
between -90 to + 90 degrees. But the recommended tilt angle is

between –70 to

•

It is recommended that you set the size to at least twice the size
of the object (height and width).

• Mask Color (qq, rr)

+70 degrees.

The user can output desired characters on the screen
and can also choose the output font size.

See.“

CAM_Title”, ”CAM_ MultiLineTitle”, “CAM_EvenLeneTitle”

• Select Font Size

(*)Font size default varies by model

Big Size : 11 lines, 40columns

1
2
…
8
9

Normal Size : 21 lines, 49 columns

0B

01

0C

02

0D

…

13

09

14

• Mask Size : Width/Height

• Function OSD display
The current setting status of the camera is displayed
on the screen.

(example)

ZOOM 3A30 WDR
DZOOM E8 ICR

F1.6 28dB
MF FAR

27www.intertest.com Operating Manual

Overview of RS232 Communication

Command & Inquiry

C

OMMAND LIST

Header : Usually it uses 0x81

Command List

•

Communication speed :

2400/4800/9600/19200,38400/57600/115200bps

•

Data bits : 8

•

Start bit : 1

•

Stop bit : 1

•

Non parity

•

Flow control using XON/XOFF and RTS/CTS, etc., is

not supported

• Command

Sends operational commands to the camera

• Inquiry

Used for inquiring about the current state of the
camera

Command Packet Note

Inquiry 8X QQ RR ... FF QQ1) = Command/Inquiry,

2) = category code

RR

1) QQ = 01 (Command), 09 (Inquiry)

2) RR = 00 (Interface), 04 (camera 1),

06 (Pan/Tilter), 07 (camera 2)

X = 1 to 7 : camera address

28 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Inquiries

Reply Packet

Note

Ack

X0 4Y FF

Y = socket

Completion

X0 5Y FF

Y = socket

Completion (Inquiries)

X0 5Y ... FF

Y = socket

Command / ACK Example

Error Packet

Description

X0 6Y 01 FF

Message length error (>14 bytes)

X0 6Y 02 FF

Syntax Error

X0 6Y 03 FF

Command Buffer Full

X0 6Y 04 FF

Command cancelled

X0 6Y 05 FF

No socket

X0 6Y 41 FF

Command not executable

Inquiry

Packet

Reply

Description

Cam_VersionInq

8X 09 00

Y0 50 GG

GGGG=Vender ID

socker #(=02)

General Command

81 01 04 38 02 FF

90 41 FF (ACK)+90 51 FF

90 42 FF 90 52 FF

Returns ACK when a command has been accepted, and

(Example)

lacking parameters.

81 01 04 08 02 FF

90 61 41 FF

90 62 41 FF

Could not execute the command in the current mode.

Inquiry Command

81 09 04 38 FF
(Example)

90 50 02 FF (Completion)

ACK is not returned for the inquiry command.

81 09 05 38 FF
(Example)

90 60 02 FF (Syntax Error)

Accepted an incompatible command.
Address Set

88 30 01 FF

88 30 02 FF

Returned the device address to +1.

IF_Clear(Broadcast)

88 01 00 01 FF

88 01 00 01 FF

Returned the same command.

IF_Clear (For x)

8x 01 00 01 FF

z0 50 FF (Completion)

ACK is not returned for this command.

• ACK message

Returned by the camera when it receives a command.
No ACK message is returned for inquiries.

• Completion message

Returned by the camera when execution of
commands or inquiries is completed. In the case of
inquiry commands, it will contain reply data for the
inquiry after the 3rd byte of the packet. If the ACK
message is omitted, the socket number will contain 0.

X = 9 to F: camera address + 8

• Error message

X = 9 to F: camera address + 8, Y = socket number

• Cam_VersionInq

Returns information on the VISCA interface.

02 FF

X = 1 to 7 : camera address (For inquiry packet)
X = 9 to F : camera address +8 (For reply packet)
GGGG = 0x0078 (vendor=KTNC)

HHHH :

Model Code

HZ7833M-LT : 0467

HZ7833M-LA : 0467

JJJJ : ex) 0123 = Ver1.2.3

GG HH HH
JJ JJ KK FF

HHHH=Model ID
JJJJ = ROM version
KK=Maximum

Command

Command Message Reply Message

(Example)

81 01 04 38 FF

(Example)

(Completion)

90 60 02 FF (Syntax Error)

(Command Not Executable)

Comments

Completion when a command has been executed.

Accepted a command which is not supported or a command

29www.intertest.com Operating Manual

Command Set

Command

Command Packet

Comments

AddressSet

Broadcast

88 30 01 FF

Address setting

IF_Clear

Broadcast

88 01 00 01 FF

I/F Clesr

CommandCancel

–

8x 2p FF

p: Socket No. (=1 or 2)

On

8x 01 04 00 02 FF

Off (Standby)

8x 01 04 00 03 FF

Stop

8x 01 04 07 00 FF

Tele (Standard)

8x 01 04 07 02 FF

Tele (Variable)

8x 01 04 07 2p FF

Wide (Variable)

8x 01 04 07 3p FF

Direct

8x 01 04 47 0p 0q 0r 0s FF

pqrs: Zoom Position

On

8x 01 04 06 02 FF

Off

8x 01 04 06 03 FF

Combine Mode

8x 01 04 36 00 FF

Optical/Digital Zoom Combined

Stop

8x 01 04 06 00 FF

Tele (Variable)

8x 01 04 06 2p FF

* Enabled during Separate Mode

Wide (Variable)

8x 01 04 06 3p FF

* Enabled during Separate Mode

* Enabled during Separate Mode

Stop

8x 01 04 08 00 FF

Far (Standard)

8x 01 04 08 02 FF

Far (Variable)

8x 01 04 08 2p FF

Near (Variable)

8x 01 04 08 3p FF

Direct

8x 01 04 48 0p 0q 0r 0s FF

pqrs: Focus Position

Auto Focus

8x 01 04 38 02 FF

Manual Focus

8x 01 04 38 03 FF

Auto/Manual

8x 01 04 38 10 FF

Infinity

8x 01 04 18 02 FF

Forced infinity

Normal

8x 01 04 58 02 FF

Low

8x 01 04 58 03 FF

Normal AF

8x 01 04 57 00 FF

Interval AF

8x 01 04 57 01 FF

Zoom Trigger AF

8x 01 04 57 02 FF

PRESET

8x 01 04 57 03 FF

Active/Interval Time

8x 01 04 27 0p 0q 0r 0s FF

pq: Movement Time, rs: Interval

Standard

8x 01 04 11 00 FF

IR Light

8x 01 04 11 01 FF

Lens

8x 01 04 19 01 FF

Lens Initialization Start

Camera

8x 01 04 19 03 FF

Camera reset

CAM_WB

Auto

8x 01 04 35 00 FF

Normal Auto

Indoor

8x 01 04 35 01 FF

Indoor mode

Outdoor

8x 01 04 35 02 FF

Outdoor mode

One Push WB

8x 01 04 35 03 FF

One Push WB mode

ATW

8x 01 04 35 04 FF

Auto Tracing White Balance

Manual

8x 01 04 35 05 FF

Manual Control mode

One Push Trigger

8x 01 04 10 05 FF

One Push WB Trigger

CAM_RGain

Reset

8x 01 04 03 00 FF

Manual Control of R Gain

Up

8x 01 04 03 02 FF

Down

8x 01 04 03 03 FF

Direct

8x 01 04 43 00 00 0p 0q FF

pq: R Gain, 0x00~0xff

CAMERA COMMAND LIST

CAM_Power

CAM_Zoom

CAM_DZoom

CAM_Focus

Power ON/OFF

Wide (Standard) 8x 01 04 07 03 FF

p=0 (Low) to 7 (High)

Digital zoom ON/OFF

Separate Mode 8x 01 04 36 01 FF Optical/Digital Zoom Separate

p=0 (Low) to 7 (High)

x1/Max 8x 01 04 06 10 FF x1/MAX Magnification Switchover

Direct 8x 01 04 46 00 00 0p 0q FF pq: D-Zoom Position

Near (Standard) 8x 01 04 08 03 FF

p=0 (Low) to 7 (High)

AF ON/OFF

One Push Trigger 8x 01 04 18 01 FF One Push AF Trigger

Near Limit 8x 01 04 28 0p 0q 0r 0s FF pqrs: Focus Near Limit Position

AF Sensitivity

CAM_AFMode

CAM_IRCorrection

CAM_ZoomFocus Direct 8x 01 04 47 0p 0q 0r

0s 0t 0u 0v 0w FF

CAM_Initialize

AF Sensitivity High/Low

AF Movement Mode

FOCUS IR compensation data switching

pqrs: Zoom Position
tuvw: Focus Position

30 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

CAM_BGain

Reset

8x 01 04 04 00 FF

Manual Control of B Gain

Up

8x 01 04 04 02 FF

Down

8x 01 04 04 03 FF

Direct

8x 01 04 44 00 00 0p 0q FF

pq: B Gain, 0x00~0xff

CAM_AE

Full Auto

8x 01 04 39 00 FF

Automatic Exposure mode

Manual

8x 01 04 39 03 FF

Manual Control mode

Shutter Priority

8x 01 04 39 0A FF

Shutter Priority Automatic Exposure mode

Iris Priority

8x 01 04 39 0B FF

Iris Priority Automatic Exposure mode

Bright

8x 01 04 39 0D FF

Bright Mode (Manual control)

CAM_SlowShutter
Auto

8x 01 04 5A 02 FF

Auto Slow Shutter ON/OFF
Manual

8x 01 04 5A 03 FF

CAM_Shutter

Reset

8x 01 04 0A 00 FF

Shutter Setting

Up

8x 01 04 0A 02 FF

Down

8x 01 04 0A 03 FF

Direct

8x 01 04 4A 00 00 0p 0q FF

pq: Shutter Position

CAM_Iris

Reset

8x 01 04 0B 00 FF

Iris Setting

Up

8x 01 04 0B 02 FF

Down

8x 01 04 0B 03 FF

Direct

8x 01 04 4B 00 00 0p 0q FF

pq: Iris Position

CAM_Gain

Reset

8x 01 04 0C 00 FF

Gain Setting

Up

8x 01 04 0C 02 FF

Down

8x 01 04 0C 03 FF

Direct

8x 01 04 4C 00 00 0p 0q FF

pq: Gain Position,0x00~0x1E, See GAIN POS.

Gain Limit

8x 01 04 2C pp FF

pp: Gain Position, 0x00~0x1E, See GAIN LIMIT

CAM_Bright

Reset

8x 01 04 0D 00 FF

Bright Setting

Up

8x 01 04 0D 02 FF

Down

8x 01 04 0D 03 FF

Direct

8x 01 04 4D 00 00 0p 0q FF

pq: Bright Position

CAM_ExpComp

On

8x 01 04 3E 02 FF

Exposure Compensation ON/OFF
Off

8x 01 04 3E 03 FF

Reset

8x 01 04 0E 00 FF

Exposure Compensation Amount Setting

Up

8x 01 04 0E 02 FF

Down

8x 01 04 0E 03 FF

Direct

8x 01 04 4E 00 00 0p 0q FF

pq: ExpComp Position, 0x00~0x0E

CAM_BackLight
On

8x 01 04 33 02 FF

Back Light Compensation ON/OFF
Off

8x 01 04 33 03 FF

CAM_AE_Response

Direct

8x 01 04 5D pp FF

pp: Automatic Exposure Response Setting

CAM_WD

On

8x 01 04 3D 02 FF

Wide-D ON/OFF
Off

8x 01 04 3D 03 FF

Set Parameter

8x 01 04 2D 00 00 00

CAM_Aperture

Reset

8x 01 04 02 00 FF

Aperture Control

Up

8x 01 04 02 02 FF

Down

8x 01 04 02 03 FF

Direct

8x 01 04 42 00 00 0p 0q FF

pq: Aperture Gain (0x00~0x0F)

CAM_HR
On

8x 01 04 52 02 FF

High-Resolusion Mode ON/OFF
Off

8x 01 04 52 03 FF

CAM_NR

—

8x 01 04 53 0p FF

p: NR Setting (0: OFF, level 1 to 5)

CAM_Gamma

—

8x 01 04 5B 0p FF

p: Gamma setting (0: Standard, 1 to 6)
See. GAMMA POSITION

CAM_HighSensitivity
On

8x 01 04 5E 02 FF

High Sensitivity mode ON/OFF
Off

8x 01 04 5E 03 FF

CAM_LR_Reverse
On

8x 01 04 61 02 FF

Mirror Image ON/OFF
Off

8x 01 04 61 03 FF

CAM_Freeze
On

8x 01 04 62 02 FF

Still Image ON/OFF
Off

8x 01 04 62 03 FF

CAM_PictureEffect

Off

8x 01 04 63 00 FF

Picture Effect Setting

Neg.Art

8x 01 04 63 02 FF

B&W

8x 01 04 63 04 FF

CAM_PictureFlip
On

8x 01 04 66 02 FF

Picture flip ON/OFF
Off

8x 01 04 66 03 FF

CAM_ICR
On

8x 01 04 01 02 FF

Infrared Mode ON(night)/OFF(day)
Off

8x 01 04 01 03 FF

CAM_AutoICR
On

8x 01 04 51 02 FF

Auto dark-field mode On/Off
Off

8x 01 04 51 03 FF

(sharpness level)

0s 00 00 00 00 FF

(01 to 30), default value: 01

s: Blown-out highlight correction level
(0:low, 1:middle, 2:high)

(sharpness)

(*) do not support neg.art

31www.intertest.com Operating Manual

Threshold

8x 01 04 21 00 00 0p 0q FF

pq: ICR ON → OFF Threshold Level (Night->Day)

Threshold

8x 01 04 41 00 00 0p 0q FF

CAM

_AutoICRAlarmReply

On

8x 01 04 31 02 FF

Auto ICR switching Alarm ON/OFF
Off

8x 01 04 31 03 FF

(Reply)
y0 07 04 31 02 FF

ICR OFF → ON (Night->Day)

y0 07 04 31 03 FF

CAM_MemSave

Write

8x 01 04 23 0X 0p 0p 0q 0q FF

X: 00 to 07 (Address), total 16 byte

CAM_Display

On

8x 01 04 15 02 FF
(8x 01 06 06 02 FF)

Display ON/OFF (function OSD display)

Off

8x 01 04 15 03 FF
(8x 01 06 06 03 FF)

On/Off

8x 01 04 15 10 FF
(8x 01 06 06 10 FF)

CAM_Title

Title Set1

8x 01 04 73 00 mm nn pp qq 00
00 00 00 00 00 FF

mm : V-position(0x00~0x14) , nn:H-position (00~28)
pp:color, qq:blink

Title Set2

8x 01 04 73 01 mm nn pp qq rr
ss tt uu vv ww FF

mm~ww : setting of display characters
(1st to 10st)

Title Set3

8x 01 04 73 02 mm nn pp qq rr
ss tt uu vv ww FF

mm~ww : setting of display characters
(11st to 20st)

Title Set4

8x 01 04 73 07

mm~ww : setting of display characters
(1st to 30st)

Title Clear

8x 01 04 74 00 FF

Title Setting Clear (clear all lines)

On

8x 01 04 74 02 FF

Title Display On (display all lines)

Off

8x 01 04 74 03 FF

Title Display Off (display off all lines)

CAM_MultiLineTitle

See.

(Big Font or

Title Set1

8x 01 04 73 1L 00 nn pp qq 00

L: Line Number (0x0~0xA)

pp: Color, qq: Blink

Title Set2

8x 01 04 73 2L mm nn pp qq rr

L: Line Number (0x0~0xA)

Title Set3

8x 01 04 73 3L mm nn pp qq rr

L: Line Number (0x0~0xA)
mnpqrstuvw: Setting of characters (11 to 20)

Title Set4

8x 01 04 73 7L 01 02 03 04 05 06

29 30 FF

L: Line Number (0x0~0xA)

Title Clear

8x 01 04 74 1p FF

Title Clear, Display On/Off

On

8x 01 04 74 2p FF

Off

8x 01 04 74 3p FF

CAM_EvenLineTitle

See.

Title Set1A

8x 01 04 73 4L 00 nn pp qq 00

L: Line Number (0x0~0x9)
Title Set2A

8x 01 04 73 5L mm nn pp qq rr

L: Line Number (0x0~0x9)
mnpqrstuvw: Setting of characters (1 to 10)

Title Set3A

8x 01 04 73 6L mm nn pp qq rr

L: Line Number (0x0~0x9)
mnpqrstuvw: Setting of characters (11 to 20)

Title Set4A

8x 01 04 73 8L 01 02 03 04 05 06

29 30 FF

L: Line Number (0x0~0x9)

Title Clear

8x 01 04 74 4p FF

Title Clear, Display On/Off

On

8x 01 04 74 5p FF

Off

8x 01 04 74 6p FF

CAM_Mute

On

8x 01 04 75 02 FF

Muting ON/OFF

Off

8x 01 04 75 03 FF

On/Off

8x 01 04 75 10 FF

CAM_PrivacyZone

SetMask

8x 01 04 76

mm: Mask Settings
Display

8x 01 04 77 pp pp pp pp FF

Mask Display ON/OFF
pp pp pp pp: Mask Settings (0: OFF, 1: ON)

SetMaskColor

8x 01 04 78 pp

pp pp pp pp: Mask Color Settings

Total 21 lines

See.“Title/Function display”

pq: ICR OFF → ON Threshold Level (Day->Night)

ICR ON → OFF (Day->Night)

ppqq: 0x0000 to 0xFFFF (Data)

Function OSD :

- Display item : Zoom Ratio, Camera ID
Framerate, AE mode, WB mode, Exposure Data

“Title/Function display”

Normal Font Odd Line )

L =

0x0 = Line 00
0x1 = Line 01

…

0x9 = Line 09
0xA = Line 0A

“Title/Function display”

(Normal Font Even Line)

L =

0x0 = Line 0B
0x1 = Line 0C

…

0x8 = Line 13
0x9 = Line 14

01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 FF

00 00 00 00 00 FF

ss tt uu vv ww FF

ss tt uu vv ww FF

07 08 09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28

00 00 00 00 00 FF

ss tt uu vv ww FF

ss tt uu vv ww FF

07 08 09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28

nn: H-position  nn : 00~0x28

mnpqrstuvw: Setting of characters (1 to 10)

01~30 : Setting of characters (1 to 30)

p:0x0~0xA, F= all lines (line 00~0A)

nn: H-position  nn : 00~0x28
pp: Color, qq: Blink

01~30 : Setting of characters (1 to 30)

p:0x0~0x9, F= all lines (line 0B ~ 14)

32 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

mm nn 0r 0r
0s 0s FF

pp pp pp qq rr

nn 00: Modify, 01: New
rr: W, ss: H

qq: Color Setting when 0 is

FF

selected rr: Color Setting when 1 is

selected

SetPanTiltAngle

8x 01 04 79 0p 0p 0p

Pan/Tilt Angle Settings

qqq: Tilt

SetPTZMask

8x 01 04 7B mm 0p

Pan/Tilt/Zoom Settings for Mask
Non_InterlockMask

8x 01 04 6F mm

mm: Non_Interlock Mask
CAM_IDWrite

—

8x 01 04 22 0p 0q 0r 0s FF

pqrs: Camera ID (=0000 to FFFF)

CAM_MD

On

8x 01 04 1B 02 FF

Motion Detection On/Off
Off

8x 01 04 1B 03 FF

Function Set

8x 01 04 1C 0m 0n 0p 0q 0r 0s

m: Display mode (when motion is detected)

Window Set

8x 01 04 1D 0m 0p 0q rr 0s FF

m: Select Detection Frame (0, 1, 2, 3)

Alarm (Reply)

y0 07 04 1B 0p FF

p: Detection Frame Number

CAM_Continuous

On

8x 01 04 69 02 FF

ZoomPosition data Continuous Output On/Off
Off

8x 01 04 69 03 FF

(Reply)

y0 07 04 69 0p 0p 0q 0q 0q 0q

pp: D-Zoom Position
CAM_ZoomPos
ReplyIntervalTimeSet

—

8x 01 04 6A 00 00 0p 0p FF

pp: Zoom Position continuous output Interval Time

CAM_Continuous

On

8x 01 04 16 02 FF

Focus Position data Continuous Output On/Off

Off

8x 01 04 16 03 FF

(Reply)

y0 07 04 16 00 00 0p 0p 0p 0p
FF

CAM_FocusPos
ReplyIntervalTimeSet

—

8x 01 04 1A 00 00 0p 0p FF

pp: Focus Position continuous output Interval Time

CAM_ExtAutoICR_thresh

ICR ON -> OFF

8x 01 04 1F 21 00 00 0p 0q FF

pq : ICR ON -> OFF threshold when Auto ICR is on

ICR OFF -> ON

8x 01 04 1F 21 01 00 0p 0q FF

pq : ICR OFF -> ON threshold when Auto ICR is on
pq = 01h ~ 1Ch (DayNight threshold)

CAM_RegisterValue

—

8x 01 04 24 mm 0p 0p FF

mm: Register No. (=00-7F)

See the “Register setting”

CAM_ColorGain

Direct

8x 01 04 49 00 00 00 0p FF

p: Color Gain setting 0h (60%) to Eh (200%)

CAM_ColorHue

Direct

8x 01 04 4F 00 00 00 0p FF

p: Color Hue setting 0h (− 14 dgrees) to Eh ( +14 degrees)

CAM_Stablizer
On

8x 01 04 34 02 FF

Digital Image Stabilizer
Off

8x 01 04 34 03 FF

CAM_Defog
On

8x 01 04 37 02 0p FF

Defog On/Off
Off

8x 01 04 37 03 00 FF

CAM_HLC

Parameter Set

8x 01 04 14 0p 0q FF

p:HLC Level (0:Off, 1:On)
q:HLC mask level(0:Off, 1(low)~F(high)

CAM_SpotAE

On

8x 01 04 59 02 FF

Spot AE mode
Off

8x 01 04 59 03 FF

Position

8x 01 04 29 0p 0q 0r 0s FF

pq:X(0~F), rs:Y(0~F)

CAM_Memory

Reset

8x 01 04 3F 00 0p FF

p:Memory Number(0~F)

Set

8x 01 04 3F 01 0p FF

Recall

8x 01 04 3F 02 0p FF

CAM_Custom

Reset

8x 01 04 3F 00 7F FF

Starts up in this mode when the power is turned on

Set

8x 01 04 3F 01 7F FF

Recall

8x 01 04 3F 02 7F FF

Inactive

8x 01 04 3F 10 7F FF

Active

8x 01 04 3F 11 7F FF

ZoomPosReply

0q 0q 0q FF

0p 0p 0q 0q 0q 0r
0r 0r 0r FF

0p 0p 0q 0q 0r 0r 0s 0s FF

FF

FF

ppp: Pan

ppp: Pan, qqq: Tilt, rrrr: Zoom

Settings pp: X, q: Y, rr: W, ss: H

bit0 : frame display
bit1 : block display
bit2 : Text display

n: Detection Frame Set (0 to F)
bit0(frame1)~bit3(frame4)
pq: Threshold Level (00 to FF)

rs: Interval Time set (00 to FF)

p: Start Horizontal Position (00 to 0F)
q: Start Vertical Position (00 to 07)
r: Stop Horizontal Position (01 to 10)
s: Stop Vertical Position (01 to 08)

* 00: When Zoom Mode is Combine
qqqq: Zoom Position

FocusPosReply

old

[Vertical timing]

pppp:Focus Position

[Vertical timing]

pq = 00h ~ 1Bh (Night  Day threshold)

pp: Register Value (=00-7F)

p:defog level(1:low,2:middle,3:high)

(See. Custom/Memory Preset Setting Items)

(*)The SET command must be sent one time to activate the
custom preset.
(*) Inactive : When the power is turned on, it starts up in the
settings before the power is turned off.

33www.intertest.com Operating Manual

(See. Custom/Memory Preset Setting Items)

Command Set

Command

Command Packet

Comments

KT_KeyAct

Stop

8x 01 70 01 00 FF

Up

8x 01 70 01 21 FF

Down

8x 01 70 01 22 FF

Left

8x 01 70 01 23 FF

Right

8x 01 70 01 24 FF

Set

8x 01 70 01 26 FF

Enter Key

Menu Off

8x 01 70 01 27 FF

Menu Off

KT_DayNightMode

Auto

8x 01 70 04 00 FF

Day

8x 01 70 04 01 FF

Night

8x 01 70 04 02 FF

External-High

8x 01 70 04 03 FF

Night = Ext. input level is High

External-Low

8x 01 70 04 04 FF

Night = Ext. input level is Low

KT_AutoICRdelay

Delay Time

8x 01 04 41 01 00 0p 0q FF

pq: sec (0~60sec)

KT_ExtICRthreshold

Day->Night(EXT-H)

8x 01 70 05 10 0p 0q FF

pq: ICR OFF→ON Threshold Level (Day->Night)

Night->Day(EXT-H)

8x 01 70 05 11 0p 0q FF

pq: ICR ON→OFF Threshold Level (Night->Day)

Day->Night(EXT-L)

8x 01 70 05 20 0p 0q FF

pq: ICR OFF→ON Threshold Level (Day->Night)

Night->Day(EXT-L)

8x 01 70 05 21 0p 0q FF

pq: ICR ON→OFF Threshold Level (Night->Day)

KT_PresetAFmode

Display Setting OSD

8x 01 70 02 00 FF

Display On the Preset AF setting OSD

Cancel & Exit

8x 01 70 02 01 FF

Display Off the setting OSD and do not save

Save & Exit

8x 01 70 02 02 FF

Display Off the setting OSD and save

Test

8x 01 70 02 10 FF

Automatically repeats TELE/WIDE

Preset AF range

8x 01 70 03 0p 0q FF

pq:00~FF, auto focusing range

KT_AgcAutoLimit

-

8x 01 70 34 pp FF

pp:AGC Max Limit (0x00~0x0F) See. GAIN LIMIT table)

KT_Sharpness

-

8x 01 70 53 0p FF

p:sharpness level (0x00~0x0E)

KT_AgcMode

-

8x 01 70 5C 0p FF

p=1(AGC On), 0(AGC Off)

KT_IrisCloseLimit

-

8x 01 70 2B pp FF

pp:Iris Close Limit, 0x00~0xA0
See. IRIS CLOSE LIMIT

KT_ZoomFocusPreset

Set

8x 01 70 3F 01 0p 0q 0r FF

pqr : preset Number (0x000~0x0FF)

Recall

8x 01 70 3F 02 0p 0q 0r FF

pqr : preset Number (0x000~0x0FF)

Clear

8x 01 70 3F 03 0p 0q 0r FF

pqr : preset Number (0x000~0x0FF)

Clear All Preset

8x 01 70 3F 0F 00 00 00 FF

Clear all preset data

KT_HomePowerOn

On

8x 01 70 24 02 FF

Moving to x1 position after power on

Off

8x 01 70 24 03 FF

After power on,
move to final position before power off

KT_FontSize

Normal

8x 01 70 15 30 FF

Function OSD / Title font size

Big

8x 01 70 15 31 FF

< Additional Command >

(Ext.H or Ext.L mode)

34 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Inquiry Command List

Inquiry Command

Command Packet

Inquiry Packet

Comments

CAM_PowerInq

8x 09 04 00 FF
y0 50 02 FF

On

y0 50 03 FF

Off (Standby)

CAM_ZoomPosInq

8x 09 04 47 FF

y0 50 0p 0q 0r 0s FF

pqrs: Zoom Position

CAM_DZoomModeInq

8x 09 04 06 FF
y0 50 02 FF

D-Zoom On

y0 50 03 FF

D-Zoom Off

CAM_DZoomC/SModeInq

8x 09 04 36 FF
y0 50 00 FF

Combine Mode

y0 50 01 FF

Separate Mode

CAM_DZoomPosInq

8x 09 04 46 FF

y0 50 00 00 0p 0q FF

pq: D-Zoom Position

CAM_FocusModeInq

8x 09 04 38 FF
y0 50 02 FF

Auto Focus

y0 50 03 FF

Manual Focus

CAM_FocusPosInq

8x 09 04 48 FF

y0 50 0p 0q 0r 0s FF

pqrs: Focus Position

CAM_FocusNearLimitInq

8x 09 04 28 FF

y0 50 0p 0q 0r 0s FF

pqrs: Focus Near Limit Position

CAM_AFSensitivityInq

8x 09 04 58 FF
y0 50 02 FF

AF Sensitivity Normal

y0 50 03 FF

AF Sensitivity Low

CAM_AFModeInq

8x 09 04 57 FF

y0 50 00 FF

Normal AF

y0 50 01 FF

Interval AF

y0 50 02 FF

Zoom Trigger AF

CAM_AFTimeSettingInq

8x 09 04 27 FF

y0 50 0p 0q 0r 0s FF

pq: Movement Time, rs: Interval

CAM_IRCorrectionInq

8x 09 04 11 FF
y0 50 00 FF

Standard

y0 50 01 FF

IR Light

CAM_WBModeInq

8x 09 04 35 FF

y0 50 00 FF

Auto

y0 50 01 FF

In Door

y0 50 02 FF

Out Door

y0 50 03 FF

One Push WB

y0 50 04 FF

ATW

y0 50 05 FF

Manual

CAM_RGainInq

8x 09 04 43 FF

y0 50 00 00 0p 0q FF

pq: R Gain

CAM_BGainInq

8x 09 04 44 FF

y0 50 00 00 0p 0q FF

pq: B Gain

CAM_AEModeInq

8x 09 04 39 FF

y0 50 00 FF

Full Auto

y0 50 03 FF

Manual

y0 50 0A FF

Shutter Priority

y0 50 0B FF

Iris Priority

y0 50 0D FF

Bright

CAM_SlowShutterModeInq

8x 09 04 5A FF
y0 50 02 FF

Auto

y0 50 03 FF

Manual

CAM_ShutterPosInq

8x 09 04 4A FF

y0 50 00 00 0p 0q FF

pq: Shutter Position

CAM_IrisPosInq

8x 09 04 4B FF

y0 50 00 00 0p 0q FF

pq: Iris Position

CAM_GainPosInq

8x 09 04 4C FF

y0 50 00 00 0p 0q FF

pq: Gain Position

CAM_GainLimitInq

8x 09 04 2C FF

y0 50 0q FF

p: Gain Limit

CAM_BrightPosInq

8x 09 04 4D FF

y0 50 00 00 0p 0q FF

pq: Bright Position

CAM_ExpCompModeInq

8x 09 04 3E FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_ExpCompPosInq

8x 09 04 4E FF

y0 50 00 00 0p 0q FF

pq: ExpComp Position

CAM_BackLightModeInq

8x 09 04 33 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_AE_ResponseInq

8x 09 04 5D FF

y0 50 pp FF

pp: 01 to 20 (hex)

CAM_WDModeInq

8x 09 04 3D FF
y0 50 02 FF

On Wide-D

y0 50 03 FF

Off

CAM_WDParameterInq

8x 09 04 2D FF

y0 50 00 00 00 0s 00 00 00 00

s: Blown-out highlight correction level
CAM_ApertureInq

8x 09 04 42 FF

y0 50 00 00 0p 0q FF

pq: Aperture Gain

CAM_HRModeInq

8x 09 04 52 FF
y0 50 02 FF

On (Hi-Resolution)

y0 50 03 FF

Off

CAM_NRModeInq

8x 09 04 53 FF

y0 50 0p FF

Noise Reduction p: 0 to 5

CAM_GammaInq

8x 09 04 5B FF

y0 50 0p FF

Gamma p: 0 to 6

CAM_HighSensitivityInq

8x 09 04 5E FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_LR_ReverseModeInq

8x 09 04 61 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_FreezeModeInq

8x 09 04 62 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_PictureEffectModeInq

8x 09 04 63 FF
y0 50 00 FF

Off

y0 50 02 FF

Neg.Art

FF

35www.intertest.com Operating Manual

y0 50 04 FF

B&W

CAM_PictureFlipModeInq

8x 09 04 66 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_ICRModeInq

8x 09 04 01 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_AutoICRModeInq

8x 09 04 51 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_AutoICRThresholdInq

8x 09 04 21 FF

y0 50 00 00 0p 0q FF

pq: ICR ON → OFF Threshold Level

CAM_AutoICRAlarmReplyInq

8x 09 04 31 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_MemSaveInq

8x 09 04 23 0X FF

y0 50 0p 0p 0q 0q FF

X: 00 to 07 (Address)
ppqq: 0x0000 to 0xFFFF (Data)

CAM_DisplayModeInq

8x 09 04 15 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_MuteModeInq

8x 09 04 75 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_PrivacyDisplayInq

8x 09 04 77 FF

y0 50 pp pp pp pp FF

pp pp pp pp: Mask Display (0: OFF, 1: ON)

CAM_PrivacyPanTiltInq

8x 09 04 79 FF

y0 50 0p 0p 0p 0q 0q 0q FF

ppp: Pan qqq: Tilt

CAM_PrivacyPTZInq

8x 09 04 7B mm FF

y0 50 0p 0p 0p 0q 0q 0q 0r 0r

mm: Mask Settings ppp: Pan
CAM_PrivacyMonitorInq

8x 09 04 6F FF

y0 50 pp pp pp pp FF

pp pp pp pp: Mask is displayed now.

CAM_IDInq

8x 09 04 22 FF

y0 50 0p 0q 0r 0s FF

pqrs: Camera ID

CAM_VersionInq

8x 09 00 02 FF

y0 50 00 78

mnpq: Model Code (04xx)

Cam_VersionInq‛

CAM_MDModeInq

8x 09 04 1B FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_MDFunctionInq

8x 09 04 1C FF

y0 50 0m 0n 0p 0q 0r 0s FF

m: Display mode

CAM_MDWindowInq

8x 09 04 1D 0m FF

y0 50 0p 0q 0r 0s FF

m: Select Detection Frame (0, 1, 2, 3) p: Start

CAM_ContinuousZoomPos

8x 09 04 69 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_ZoomPosReplyIntervalT
imeInq

8x 09 04 6A FF

y0 50 00 00 0p 0p FF

pp: Interval Time

CAM_ContinuousFocusPos

8x 09 04 16 FF
y0 50 02 FF

On

y0 50 03 FF

Off

CAM_FocusPosReplyIntervalT
imeInq

8x 09 04 1A FF

y0 50 00 00 0p 0p FF

pp: Interval Time

CAM_ExAutoICRThresholdIn

8x 09 04 1F 21 00 FF

y0 50 00 00 0p 0q FF

pq : ICR ONOFF threshold when Auto ICR

CAM_ExAutoICROnLevelInq

8x 09 04 1F 21 01 FF

y0 50 00 00 0p 0q FF

pq : ICR OFFON threshold when Auto ICR

CAM_RegisterValueInq

8x 09 04 24 mm FF

y0 50 0p 0p FF

mm: Register No. (00 to 7F) pp: Register
CAM_ColorGainInq

8x 09 04 49 FF

y0 50 00 00 00 0p FF

p: Color Gain setting 0h (60%) to Eh (200%)

CAM_ColorHueInq

8x 09 04 4F FF

y0 50 00 00 00 0p FF

p: Color Hue setting 0h (− 14 degrees) to Eh

(+ 14 degrees)

CAM_StabilizerInq

8x 09 04 34 FF
y0 50 02 FF

Stabilizer(DIS) on

y0 50 03 FF

Stabilizer(DIS) off

CAM_DefogInq

8x 09 04 37 FF
y0 50 02 0p FF

Defog On,
p:defog level(1:low,2:middle,3:high)

y0 50 03 00 FF

Defog Off

CAM_HLCInq

8x 09 04 14 FF

y0 50 0p 0q FF

p:HLC Level (0:Off, 1:On)

q:HLC mask level(0:Off, 1(low)~F(high)

CAM_SpotAEModeInq

8x 09 04 59 FF
y0 50 02 FF

Spot AE on

y0 50 03 FF

Spot AE Off

CAM_SpotAEPosInq

8x 09 04 29 FF

y0 50 0p 0q 0r 0s FF

pq:X(0~F), rs:Y(0~F)

CAM_MemoryInq

8x 09 04 3F FF

y0 50 pp FF

pp:memory number recalled last

(8x 09 06 06 FF)

ReplyModeInq

ReplyModeInq

q

0r 0r FF

mn pq rs tu vw FF

qqq: Tilt rrr: Zoom

rstu: ROM version
vw: Socket Number (=02)
See. ‚

n: Detection Frame Set (0 to F) pq: Threshold
Level (0 to FF) rs: Interval Time set (0 to FF)

Horizontal Position (00 to 0B) q: Start Vertical
Position (00 to 07)
r: Stop Horizontal Position (01 to 0C) s: Stop
Vertical Position (01 to 08)

is on (Night  Day)

is on (Day  Night)

Value (00 to FF)

36 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

< Additional Inquiry >

Inquiry Command

Command Packet

Inquiry Packet

Comments

KT_MenuOnOffInq

8x 09 70 01 FF
y0 50 02 FF

Menu on

y0 50 03 FF

Menu off

KT_DayNightModeIrq

8x 09 70 04 FF

y0 50 0p 0q FF

pq:day&night mode

KT_ExtICRthresholdIrq

8x 09 70 05 10 FF

y0 50 0p 0q FF

pq:ext-H day->night threshold

8x 09 70 05 11 FF

y0 50 0p 0q FF

pq:ext-H night->day threshold

8x 09 70 05 20 FF

y0 50 0p 0q FF

pq:ext-L day->night threshold

8x 09 70 05 21 FF

y0 50 0p 0q FF

pq:ext-L night->day threshold

KT_PresetAFRangeIrq

8x 09 70 03 FF

y0 50 0p 0q FF

pq: preset AF range

KT_AgcAutoLimitIrq

8x 09 70 34 FF

y0 50 pp FF

pp:AGC Max Limit (See. GAIN LIMIT table)

KT_SharpnessIrq

8x 09 70 53 FF

y0 50 0p FF

p:sharpness level (0x00~0x0F)

KT_AgcModeIrq

8x 09 70 5C FF

y0 50 0p FF

p:1(AGC On),0(AGC Off)

KT_IrisCloseLimitIrq

8x 09 70 2B FF

y0 50 0p 0q FF

pq:Iris Close Limit, 0x00~0xA0

KT_ZoomFocusPresetInq

8x 09 703F 0n 0n 0n FF

y0 50 0v 0z 0z 0z 0z 0f 0f 0f

nnn:preset number(0x000~0x0FF)

ffff : focus position

KT_HomePowerOnInq

8x 09 70 24 FF

y0 50 0p FF

p:Home Position Mode, 2(ON)/3(OFF)

KT_CustomPresetInq

8x 09 70 3E FF

y0 50 0p FF

p: 1(custom preset activate)
KT_FontSizeInq

8x 09 70 15 FF

y0 50 0p FF

p: 0(Normal Size) / 1(Big Size)

0f FF

v : 1(saved), 0(empty)
zzzz : zoom position

0(custom preset inactive)

37www.intertest.com Operating Manual

7

0

2

0

2

0

2

0

Lens Control System Inquiry Commands ................ Command Packet 8x 09 7E 7E 00 FF

Byte Bit Comments

6
5
4

0

3
2
1

7 0 Completion Message
6 1
5 0
4 1

1

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

2

3
2
1
0
7 0
6 0
5 0
4 0

3

3
2
1
0
7 0
6 0
5 0
4 0

4

3

1

7 0
6 0
5 0
4 0

5

3
2
1
0

Destination Address

Source Address

Zoom Position (HH)

Zoom Position (HL)

Zoom Position (LH)

Zoom Position (LL)

Byte Bit Comments

7 0
6 0
5 0
4 0

6

3
2

Focus Near Limit (H)

1
0
7 0
6 0
5 0
4 0

7

3

Focus Near Limit (L)

1

7 0
6 0
5 0
4 0

8

3
2

Focus Position (HH)

1
0
7 0
6 0
5 0
4 0

9

3
2

Focus Position (HL)

1
0
7 0
6 0
5 0
4 0

10

11

3

Focus Position (LH)

1

7 0
6 0
5 0
4 0
3
2

Focus Position (LL)

1
0

Byte Bit Comment

7 0
6 0
5 0
4 0

12

13

14

15

3 0
2 0
1 0
0 0
7 0
6 0
5

DZoomMode 0: Combine
1: Separate

4

0: Normal 1: Interval
2: Zoom Trigger

3
2

AF Sensitivity 0:
Slow 1: Normal

1 Digital Zoom 1: On 0: Off

Focus Mode 0: Manual 1: Auto

0
7 0
6 0
5 0
4 0

3

Low Contrast Detection 1:

Yes 0: No

2

Camera Memory
Recall 1: Executing 0:

1

Focus Command 1:
Executing 0: Stopped

0

Zoom Command 1:
Executing 0: Stopped

7 1 Terminator (FFh)
6 1
5 1
4 1
3 1
2 1
1 1
0 1

38 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

7

6

4

2

0

2

0

2

0

2

0

2

Mode

0

2

Exposure Mode

0

5

3

1

2
3

1

0

2

0

Camera Control System Inquiry Commands ............ Command Packet 8x 09 7E 7E 01 FF

Byte Bit Comments

5

0

3

Destination Address

Byte Bit Comments

7 0
6 0
5 0
4 0

6

3

Byte Bit Comments

7 0
6 0
5 0
4 0

12

3

1

7 0 Completion Message
6 1
5 0
4 1

1

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

2

3

1

7 0
6 0
5 0
4 0

3

3
2
1
0
7 0
6 0
5 0
4 0

4

3

1

Source Address

R Gain (H)

R Gain (L)

B Gain (H)

1
0
7 0
6 0
5 0
4 0

7

3
2
1

7 0
6 0
5 0
4

8

3

1

7 0
6 0

High-Resolution 1: On 0: Off

4

Wide-D (1: Other

9

10

than Off, 0: Off)

3 0
2 Back Light 1: On 0: Off
1 Exposure Comp. 1: On 0: Off

Slow Shutter 1: Auto 0:

0
7 0
6 0
5 0
4

2 Shutter Position

WB

Aperture Gain

Gain Position

Exposure Comp. Position

13

14

15

1
0
7 0
6 0
5 0
4

2 Bright Position

7 0
6 0
5 0
4 0
3

1

7 1 Terminator (FFh)
6 1
5 1
4 1
3 1
2 1
1 1
0 1

7 0
6 0
5 0
4 0

5

3

1

B Gain (L)

0
7 0
6 0
5 0

4

3

11

2
1

0

Iris Position

39www.intertest.com Operating Manual

7

6

0

Picture Effect Mode

0

2

0

1:provided, 0: not provided

Day&Night Mode
0:auto
1:day 2:night
3:Ext

Other Inquiry Commands ............ Command Packet 8x 09 7E 7E 02 FF

Byte Bit Comments

5
4

0

3
2
1

7 0 Completion Message
6 1
5 0
4 1

1

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

2

3 Auto ICR Alarm (1: On, 0:
2 Auto ICR 1: On 0: Off
1 0
0 Power 1: On 0: Off
7 0
6 0
5 0
4 ICR 1: On 0: Off

3

3 Freeze 1: On 0: Off
2 LR Reverse 1: On 0: Off
1 0
0 0
7 0
6 0
5 Privacy Zone 1: On 0: Off
4 Mute 1: On 0: Off

4

3 Title Display 1: On 0: Off
2 Display 1: On 0: Off
1 0
0 0
7 0
6 0

40 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

5 0
4 0

5

3
2
1
0

Destination Address

Source Address

Byte Bit Comments

7 0
6 0
5 0
4 0

6

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

7

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

8

3
2
1
0
7 0
6 0
5 0
4 0

9

3
2
1

7 0
6 0
5 0
4 0

10

3

1

7 0
6 0
5 0
4 0

11

3
2
1
0

Camera ID (HH)

Camera ID (HL)

Camera ID (LH)

Camera ID (LL)

Byte Bit Comments

7 0
6 0
5 0
4

12

13

14

15

3 0
2

1 Stabilizer

0 1: 1/50, 1/25 0: 1/60, 1/30
7 0
6 0
5 0
4 0
3
2
1
0
7 0
6 0
5 0
4 0
3 0
2 0
1 0
0 0
7 1 Terminator (FFh)
6 1
5 1
4 1
3 1
2 1
1 1
0 1

Memory 1: Provided 0:
Not provided

ICR 1: Provided 0:
Not provided

-H, 4:Ext-L

7

0

2

(H)

0

(L)

2

0

0

2

0

2

0

0

0

5

Eh (200%))

3

3

1

5

Gamma

4

1

NR Level

5

0

0

Enlargement Function1 Query Command.................... Command Packet 8x 09 7E 7E 03 FF

Byte Bit Comments

6
5
4

0

3
2
1

7 0 Completion Message
6 1
5 0
4 1

1

3 0
2 0
1 0
0 0
7 0
6 0
5 0
4 0

2

3

Destination Address

Source Address

Byte Bit Comments

7 0
6 0
5 0
4 0

6

3
2

AF Interval Time (H)

1

7 0
6 0
5 0
4 0

7

3

1

7 0
6 0
5 0
4 0

8

3

AF Interval Time (L)

Byte Bit Comments

7 0
6

Color Gain (0h (60%) to

4

Advanced Privacy

11

12

2

(1: Provided, 0: Not provided)

Alarm (1: Provided, 0: Not

1

provided)

0

Picture flip (1: Provided, 0:
Not provided)

7 0
6 0
5 0
4

2 0

0
7 0
6

Digital Zoom Position

1

7 0
6 0
5 0
4 0

3

3
2

Digital Zoom Position

1
0
7 0
6 0
5 0
4 0

4

3

AF Activation Time (H)

1

7 0
6 0
5 0
4 0

5

3
2
1
0

AF Activation Time (L)

10

1

7 0
6 0
5 0
4 0

9

3
2
1
0
7 0
6 0
5 0
4 0
3 0
2 MD (1: On, 0: Off)
1 Reserved
0 Picture flip (1: On, 0: Off)

3

13

14

15

High Sensitivity

mode (1: ON, 0: OFF)

2

0
7 0
6

4
3
2
1

7 1 Terminator (FFh)
6 1
5 1
4 1
3 1
2 1
1 1
0 1

Gain Limit

41www.intertest.com Operating Manual

7

6
4

2

0

6

1

5

0

2

0

1

0

6

0

5

0

2

1

0

2

0

7

0

4

0

2

0

correction level 0: L 1: M 2: H

7

0

5 0 4

0

0

1

0

7

0

6

0

5

0

6

0

5

0

2

0

1

0

6

0

5

0

2

0

1

0

6

0

3

0

7

0

6

0

5

0

2

0

1

0

6

0

5

0

2

0

1

0

6

0

5

0

2

0

1

0

6

1

3

1

Enlargement Function2 Query Command.................... Command Packet 8x 09 7E 7E 04 FF

Byte Bit Comm

Byte Bit Comments

Byte Bit Comments

5

0

1

2

3

3

1

7 0 Completion Message

4 1
3 0

0 0
7 0

4 0
3 0

0
7 0
6 0
5 0
4 0
3

1

Destination Address

Source Address

WideD mode (0: OFF, 1: ON)

0

4 0

6

3
2
1
0
7 0

4 0

7

3 0

0 Defog Mode(1:on,0:off)
7 0

4 0

8

3 0

0 0
7 0
6 0
5 0
4 0
3 0

9

2 0

1 0

0 0
7 0

4 0

11

0

12

13

14

3 0

0 0
7 0

4 0
3 0

0 0
7 0

4 0
3 0

0 0
7 0
6 0
5 0
4 0
3 0
2 0

1 0

0 0
7 1 Terminator (FFh)

6 0
5 0

10

4

3

1

WideD blown-out highlight

0

5 0
4 0

2 0
1 0
0 0

5 1
4 1

15

2 1
1 1
0 1

6 0

5

3
2

42 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

7

4

3

2

0

7

0 Completion Message

6

1

3

0

2

0

7

0

6

0

3

2

0

1

0

5 4

2

5

4

Reserved

1

5

4 3

Reserved

2

1

0

6

4

2

0

7

0

6

4

0

7

0

6

4

2

1

0

5 4

2

5

4

Reserved

1

6

4

2

0

7

0

6

4

0

7

0

6

4

2

1

0

5 4

2

4

1

3

1

Enlargement Function3 Query Command.................... Command Packet 8x 09 7E 7E 05 FF

Byte Bit Comments

6
5

Destination Address

Byte Bit Comment

7 0

5

Byte Bit Comments

7 0

5

0

1

5 0
4 1

1

1 0
0 0

5 0
4 0

2

7 0
6

Source Address

6

7

8

3

1

5

3 Reserved
2
1

5

3 Reserved

7 0
6

Reserved

11

12

13

3

1

5

3 Reserved
2
1

5

3 Reserved

7 0
6

Reserved

3

3

1

0
7 0

6

3

4

2

0
7 0
6

5

Reserved

9

10

3

1

0
7 0

6

3
2

0

Reserved

14

15

3

1

0
7 1 Terminator (FFh)

6 1
5 1

2 1
1 1
0 1

Reserved

43www.intertest.com Operating Manual

Index

60/30 mode

50/25 mode

15

1/10000

1/10000

14

1/6000

1/6000

13

1/4000

1/3500

12

1/3000

1/2500

11

1/2000

1/1750

10

1/1500

1/1250

0F

1/1000

1/1000

0E

1/725

1/600

0D

1/500

1/425

0C

1/350

1/300

0B

1/250

1/215

0A

1/180

1/150

09

1/125

1/120

08

1/100

1/100

07

1/90

1/75

06

1/60

1/50

05

1/30

1/25

04

1/15

1/12

03

1/8

1/6

02

1/4

1/3

01

1/2

1/2

00

1/1

1/1

Index

Iris

11

F1.6

10

F2

0F

F2.4

0E

F2.8

0D

F3.4

0C

F4

0B

F4.8

0A

F5.6

09

F6.8

08

F8

07

F9.6

06

F11

05

F14

00

CLOSE

Index

Level

0F

Sharp

…

00

Dull

Index

Gain

0F

+58dB

0E

+52dB

0D

+48dB

0C

+44dB

0B

+40dB

0A

+36dB

09

+32dB

08

+28dB

07

+24dB

06

+20dB

05

+16dB

04

+12dB

03

+8dB

02

+4dB

01

+0dB (OFF)

00

-3dB

Index

Iris

Gain

0E

+7

+10.5 dB

0D

+6

+9 dB

0C

+5

+7.5 dB

0B

+4

+6 dB

0A

+3

+4.5 dB

09

+2

+3 dB

08

+1

+1.5 dB

07

0

0 dB

06

−1

−1.5 dB

05

−2

−3 dB

04

−3

−4.5 dB

03

−4

−6 dB

02

−5

−7.5 dB

01

−6

−9 dB

00

−7

−10.5 dB

Index

Iris

Gain

1F

F1.6

+58dB

1E

F1.6

+52dB

1D

F1.6

+48dB

1C

F1.6

+44dB

1B

F1.6

+40dB

1A

F1.6

+36dB

19

F1.6

+32dB

18

F1.6

+28dB

17

F1.6

+24dB

16

F1.6

+20dB

15

F1.6

+16dB

14

F1.6

+12dB

13

F1.6

+8dB

12

F1.6

+4dB

11

F1.6

0 dB

10

F2

0 dB

0F

F2.4

0 dB

0E

F2.8

0 dB

0D

F3.4

0 dB

0C

F4

0 dB

0B

F4.8

0 dB

0A

F5.6

0 dB

09

F6.8

0 dB

08

F8

0 dB

07

F9.6

0 dB

05

F14

0 dB

00

CLOSE

0 dB

Index

Open Level

A0

More Open

...

60

default

… 10

More Close

Iris
Operating
Range

Open Limit
(fixed)

Close Limit
(adjustable)

Command Setting Values

SHUTTER SPEED

GAIN LIMIT & GAIN POSITION

EXPOSURE COMPENSTAION(bright)

AE BRIGHT MODE LEVEL

IRIS

Aperture (=sharpness)

06 F11 0 dB

IRIS CLOSE LIMIT

Red/Blue Manual Gain
0x00 ~ 0xFF

44 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Zoom Position

0000 ~ 4000 ~ 7AC0

Tele end Tele end

Focus Position

1000 ~ F000
Far end Near end

Focus Near Limit

1000 // inf

F000 // 10cm

The Lower 1 byte

Zoom Ratio

Optical Zoom Position

X1

0000

X2

16A1

X3

2063

X4

2628

X5

2A1D

X6

2D13

X7

2F6D

X8

3161

X9

330D

X10

3486

X11

35D7

X12

3709

X13

3820

X14

3920

X15

3A0A

X16

3ADD

X17

3B9C

X18

3C46

X19

3CDC

X20

3D60

X21

3DD4

X22

3E39

X23

3E90

X24

3EDC

X25

3F1E

X26

3F57

X27

3F8A

X28

3FA4

X29

3FB8

X30

3FD0

X31

3FE0

X32

3FF0

X33

4000

Digital Zoom

Ratio

Combine
Mode

Separate
Mode

X1

4000

00

X2

6000

80

X3

6A80

AA

X4

7000

C0

X5

7300

CC

X7

76C0

DB

X8

7800

E0

X9

78C0

E3

X10

7980

E6

X11

7A00

E8

X12

7AC0

EB

Value

Wide Limit

Tele Limit

Zoom

Ratio

Zoom

Ratio

00

0000 1 4000

30

10

00C4

1.02

3F3B

25.5

20

0188

1.04

3E77

22.7

30

024C

1.06

3DB3

20.7

40

0310

1.08

3CEF

19.1

50

03D4

1.11

3C2B

17.8

60

0498

1.13

3B67

16.7

70

055C

1.15

3AA3

15.7

80

0620

1.18

39DF

14.8

90

06E4

1.2

391B

14

A0

07A8

1.23

3857

13.2

B0

086C

1.26

3793

12.5

C0

0930

1.28

36CF

11.8

D0

09F4

1.31

360B

11.2

E0

0AB8

1.34

3547

10.6

F0

0B7C

1.38

3483

10

FF

0C33

1.41

33CC

9.5

Index

Gamma

0

0.45

1

0.50

2

0.55 3 0.60 4 0.65

5

0.70

6

0.75

Lens Control

Digital Zoom Position

Wide end Optical Digital

Optical Zoom Position

1200 //500m
1400 //200m
1600 //100m
1700 //60m
2000 // 30m
2400 //20m
3000 // 10m
5000 // 5m
7000 // 3m
8000 //2.5m
9000 // 2m
A000 // 1.5m
C000 // 1m
D000 // 50cm

is fixed to 00

(*) As the distance
on the left will
differ due to
temperature or
any other
conditions.

X6

Tele/Wide Limit Setting

7540

D5

GAMMA POSITION

45www.intertest.com Operating Manual

Title Setting

Line number

00 to 14h

H-position

00 to 28h

Blink
00: Dose not blink

01: Blinks

Color

00

White

01

Yellow

02

Violet

03

Red

04~06

White

Custom/Memory Preset Setting Items

Custom

Preset

Memory

Preset

Zoom Position

O

O

Digital Zoom On/Off

O

O

Digital Zoom Position

O

X

Zoom Start Position

O

X

Zoom Stop Position

O

X

Zoom Speed

O

X

AF Home Position

O

X

AF Limited Range

O

X

Focus Position

O

O

Focus Mode

O

O

Near Limit Setting

O

X

AF Sensitivity

O

X

AF Mode

O

O

AF Run Time

O

X

AF Interval Time

O

X

WB Mode

O

O

WB Data(Rgain,Bgain)

O

O

COLOR Gain

O

X

AE Mode

O

O

AE Response

O

X

AE Slow Shutter

O

O

Shutter Position

O

O

Iris Position

O

O

Gain Position

O

O

Gain Limit

O

O

Bright Position

O

O

Exposure Compensation Mode

O

O

Exposure Compensation Amount

O

O

Flickerless

O

X

Aperture Level

O

O

Gamma O X

High Resolution

O

X

LR Reverse

O

X

Picture Flip

O

X

Freeze O X

Picture Effect

O

X

D-WDR O X

Defog O O

Defog Level

O

X

3DNR Mode

O

O

3DNR Level

O

X

2DNR Mode

O

X

2DNR Weight

O

X

Digital Image Stabilizer On/Off

O

X

Digital Image Stabilizer Setting

O

X

BackLight On/Off

O

O

BLC Setting

O

X

WDR On/Off

O

O

HLC On/off

O

X

HLC Setting

O

X

ICR On/Off

O

O

Auto ICR On/Off

O

O

Auto ICR Threshlod Level

O

X

Day&Night Dwell Time

O

X

Day->Night AGC level

O

X

Night->Day AGC level

O

X

Day->Night EXT-H level

O

X

Night -> Day EXT-H level

O

X

Day->Night EXT-L level

O

X

Night -> Day EXT-L level

O

X

Privacy Mask On/Off

O

X

Privacy Mask Display

O

X

Privacy Mask Setting

O

X

Motion On/Off

O

X

Motion Display

O

X

Motion Setting

O

X

Title Display On/Off

O

X

Title Setting

O

X

Display On/Off

O

X

ETC X X

00 01 02 03 04 05 06 07

A B C D E F G H

08 09 0a 0b 0c 0d 0e 0f

I J K L M N O P

10 11 12 13 14 15 16 17

Q R S T U V W X

18 19 1a 1b 1c 1d 1e 1f

Y Z & ? ! 1 2

20 21 22 23 24 25 26 27

3 4 5 6 7 8 9 0

28 29 2a 2b 2c 2d 2e 2f

À È Ì Ò Ù Á É Í

30 31 32 33 34 35 36 37

Ó Ú Â Ê Ô Æ

38 39 3a 3b 3c 3d 3e 3f

Õ Ñ Ç ß Ä Ï Ö Ü

40 41 42 43 44 45 46 47

Å $ ¥

48 49 4a 4b 4c 4d 4e 4f

ø ‚ : ‘ . , / -

50



£ ¿ ¡

Ã

Item

46 iShot® Xblock® XBC-KZ33 Block Camera www.intertest.com

Register Settind

CAM_RegisterValue

8x 01 04 24
mm 0p 0p FF

mm: Register No. (=00-7F)
pp: Register Value (=00-7F)

VISCA

00

00

(Default)

9600 bps

01

19200 bps

02

38400 bps

03

115200bps

04

57600 bps

05

2400 bps

06

4800 bps

02

1080i/60

04

1080i/50

06

1080p/30

08

1080p/25

09

720p/60

0A

720p/60

0C

720p/50

0E

720p/30

0F

720p/30

11

720p/25

13

1080p/60

14

1080p/50

15

1080p/60

LVDS mode

74

00

(Default)

Single output

01

Dual output

Zoom Limit

50

00~FF

Wide Limit

51

00~FF

Tele Limit

E-Zoom Max

52

00-FF

Max. digital

256 ÷ (256-Value)

FocusOffset

55

00-FF

00: None

Auto Slow

56

01

(default)

02

1/15

03

1/8

04

1/4

05

1/2

06

1/1

Enlargyment

5F

00~FF

Bit3:Auto ICR

Language

60

00~06

00:English

CVBS scale

7C

00

4:3

EX-SDI V1.0

7E

00

OFF

command

Baud Rate

Monitoring
Mode

Register

(mm)

Value

(pp)

72 01 1080i/60

07 1080p/30

contents

01:Russian
02:Spanish
03:Chinese
04:German
05:Franch
06:Portuguese
07:Japanes

01

01

16:9

ON

(default:00)

(default:00)

(Default:EB)

@DomeCover

(Default:00)

shutter limit

Mode

(default:00)

zoom ratio =

FF: Max.

1/30

OFFON
setting enable
ON/OFF
(1:ON, 0:OFF)

47www.intertest.com Operating Manual

PELCO-D protocol for RS-485/RS-232

Command

Output : PELCO-D

Description

Zoom +

FF 01 00 20 00 00 CS

Zoom -

FF 01 00 40 00 00 CS

Focus +

FF 01 01 00 00 00 CS

Focus -

FF 01 00 80 00 00 CS

Iris +

FF 01 02 00 00 00 CS

It is used for Menu

Iris -

FF 01 04 00 00 00 CS

Stop

FF 01 00 00 00 00 CS

Go To Preset

FF 01 00 07 00 zz CS

zz : preset no (00~FF)

Set Preset

FF 01 00 03 00 zz CS

Clear Preset

FF 01 00 05 00 zz CS

Flip(180 rotate)

FF 01 00 07 00 21 CS

Menu or SET

FF 01 00 07 00 5F CS

Menu command(Go to preset + 95)

Menu or SET

FF 01 00 07 00 60 CS

Menu command(Go to preset + 96)

Menu or SET

FF 01 00 03 00 62 CS

Menu command(Set preset + 98)

Zoom speed

FF 01 00 25 00 zz CS

zz = 00(slow)~03 (fast), default:02

Reset camera to default

FF 01 00 29 00 00 CS

Initialize camera settings

Auto focus auto/on/off

FF 01 00 2B 00 zz CS

zz = 00(auto),01(one push AF),02(one push mode), 03(manual),
04(one shot-limit)

Backlight on/off

FF 01 00 31 00 zz CS

zz = 01(on),02(off)

Auto white balance on/off

FF 01 00 33 00 zz CS

zz = 01(Auto WB mode),02(manual WB mode)

Set Shutter speed

FF 01 00 37 zz zz CS

zzzz : shutter speed (see. Shutter speed table)

Video Output

HD-AHD

HD-TVI

HD-SDI

EX-SDI(V1.0)

Standard Device
STANDARD

STANDARD

STANDARD

STANDARD

CVBS

CVBS

CVBS

CVBS

DVR manufacturer

RAYSHARP

HIK VISION (A/B)

TECHWIN

WEBGATE

FOCUS

RAYSHARP

3R TAGATEC

RS485/RS232

Pelco-D

PELCO-D protocol for RS-485/RS-232

total 256 zoom/focus position presets.
Reserved presets : zz = 21, 5F, 60,62

Supported DVRs

Since the color representation differs depending on the DVR, you have to select the type of DVR to use.

(*)

(*)

(*)

(*)

(*)

(*)

(*)

(*)

(*) STANDRAD : Standard Color
(*) CVBS : If you connect directly to a CVBS monitor, select "CVBS".
(*)Alternatively, you can change the color directly in the menu.

www.intertest.com

303 State Route 94

Columbia, NJ 07832 USA

Ofce: 908-496-8008

Toll Free (U.S.): 800-535-3626

Fax: [phone]

Rev1-02.08.18