Inter-Tech X-608 User Manual
X-608 Infinity Micro – small level Infinity-Mirror
An infinity mirror in the front illuminated by RGB LEDs, an RGB LED strip in the power supply tunnel
and the standard 120mm RGB fan make the X-608 a real eye-catcher. The front made of tempered
glass and the side panel made of 4mm thick tempered glass, which opens like a door, give a
generous view of strong effects and colors, which are provided by switches on the front or via the 5V
RGB header connector (addressable RGB LEDs). Plenty of room for additional fans or water cooling
can be found in the spacious interior of the X-608.
On the top of the case are a removable dust filter and the controls. In addition to the HD audio
sockets, there is a USB 3.0 Type A and USB 3.0 Type C connection as well as two separate switches
for controlling the brightness and the effects. A dust filter in the power supply tunnel and silent
blocks, on which the power supply is stored, allow a quiet and clean operation. The X-608 leaves
nothing to be desired with a removable hard disk mounting frame, a holder for long graphics cards,
the included RGB sync cable and a wide range of cable laying options.
Front panel made of tempered glass with RGB Infinity-Mirror
Window side panel made of 4mm thick tempered glass with door hinge
120mm RGB fan and RGB LED-strip included
3pin RGB header connector for 5V RGB motherboard control
Errors excepted. No warranty for t he correctness of the informat ion State: 22.07.2019
Specifications
Motherboard
µATX, ITX
Max. Drive Bays
5.25" external: 0
3.5" external: 0
3.5" internal: 2*
2.5" internal: 5*
Front Connectors
USB 3.0: 1
USB 3.0 Type C: 1
Microphone: 1
Speaker: 1
Cooling System
Front: 3x 120mm
(optional)
Rear: 1x 120mm
(serial, RGB, 3pin-connector)
Top: 2x 120mm
(optional)
Max CPU-Cooler height
150mm
Max Graphic card length
320mm
Packing Units
Shipping unit: 1 pcs
Packing unit: 24 pcs
Warranty
24 Months
Article Number
EAN-Code
88881315
4260455644730
Scope of Delivery
Screw set
RGB sync cable
Graphics cards bracket
Manual
(German)
Features
Front panel with Infinity-Mirror-Effect made of tempered glass
Window side panel made of 4mm thick tempered glass
Window side part swiveling for easy disassembly
Integrated RGB LED-Strip on the PSU tunnel
1x 120mm serial RGB fan at the rear installed
Switch for manual brightness adjustment of the RGB LEDs
RGB-/PWM-board for up to 5 RGB-devices
(in combination with mainboard with PWM function up to 5 fans with 3pin-connector)
3pin RGB header connector for 5V RGB motherboard control
Two 3.5" mounting options underneath the mainboard tray with separated airflow
Option to mount liquid coolers in 120mm and 240mm
Easy removable dust filters in the cap and the bottom
Decoupled PSU mounting in separated tunnel at the bottom
Reusable slot brackets
Cable management
USB Type C internally as USB 3.0 connector
Stands
*can vary due to combinations
Errors excepted. No warranty for t he correctness of the informatio n State: 22.07.2019
Loading...