Inter-Tech X-3601 User Manual
X-3601 Impulse Micro – RGB in micro format
A lightly tinted tempered glass side panel and two RGB LED strips that span the front
panel of the case make the X-3601 Impulse Micro the ideal candidate for a high-end
system with complex LED lighting in the Micro-ATX format. The standard built-in
digital 5V RGB control board, which has space for up to four RGB devices and four
3pin fans, leaves the option open as to whether the built-in RGB devices should be
managed and controlled via the 3pin 5V RGB mainboard controller or via the
integrated LED switch in the front panel.
Space for an additional 3.5" hard drive can be found in the separate tunnel below the
mainboard carrier, in which the power supply is also placed, above a removable dust
filter. Two 2.5" SSDs can also be installed in the interior, each on four rubberized
brackets, to be assembled. Due to the openings in the cage and in the power supply
tunnel, all laid cables can be easily and simply hidden behind the mainboard carrier,
thus ensuring a tidy interior.
RGB/fan board for up to four RGB devices and four 3-pin fans
3pin RGB header connection for 5V RGB mainboard control
Including two RGB LED strips in the front
Tempered glass side panel
Errors excepted. No warranty for the correctness of the information State: 05.03.2020
Specifications
Motherboard
µATX, ITX
Max. drive bays
5.25" external: 0
3.5" external: 0
3.5" internal: 1
2.5" internal: 2
Front connectors
USB 3.0: 1
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling system
Front: 2x 120mm o. 2x 140mm
(optional)
Rear: 1x 120mm
(optional)
Top: 2x 120mm o. 2x 140mm
(optional)
Max CPU-Cooler height
155mm
Max Graphic card length
325mm
Packing units
Shipping unit: 1 pcs
Packing unit: 24 pcs
Warranty
24 Months
Article number
EAN-Code
88881326
4260455645072
Scope of delivery
Screw set
Rubberized pads for 2.5" SSDs
Speaker
Features
Front panel with two RGB light strips
Tempered glass side panel
3pin RGB header connection for 5V RGB mainboard control
LED button for changing the color effects
RGB/fan board for up to four RGB devices and four 3pin fans
3.5" bay below the motherboard carrier with separate airflow
Two 2.5" SSD bays in the interior
Holder for water cooling in the sizes 120mm, 240mm and 280mm
Power supply holder in a separate cage in the bottom part
Openings for easy cable laying
Easy to remove dust filter underneath the power supply and in the top
Screwed slot brackets made of mesh
Stands
Dimensions and Weight
Cage
Case
Package
Height
380mm
395mm
450mm
Width
210mm
210mm
270mm
Depth
380mm
440mm
490mm
Weight (net): 5.50kg
Weight (gross): 6.34kg
Errors excepted. No warranty for the correctness of the information State: 05.03.2020
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
Certification:
Loading...