Inter-Tech S-3906 User Manual
S-3906 Renegade – RGB meets Design
Are you looking for a special case, that moves your lighting concept into new spheres? Then the
S-3906 Renegade is just right for you! A slightly tinted Tempered Glass side panel and one wide
RGB LED strip, which spans C-shaped over the three-dimensional front panel of the case, make
the S-3906 the ideal candidate for a high-end system with elaborate LED lighting. This is not
only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also
because of the digital 5V RGB control board with PWM, which accommodates up to 7 additional
RGB fans, which are managed via the RGB motherboard control header. Space for up to four
additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the magnetic dust filter inserts, all controls. In addition
to two USB 2.0 and USB 3.0 ports and HD audio jacks, there is a switch for manually switching
through the LED effects. Another removable dust filter under the power supply and a variety of
ways to lay the cables, complete the offer.
RGB control board (allows effects like running light or rainbow)
3pin RGB header connector for digital 5V RGB motherboard control
Includes two RGB LED strips and a 120mm RGB fan
Side panel made of Tempered Glass
Errors excepted. No warranty for the correctness of the information State: 01.11.2018
Specifications
Motherboard
ATX, µATX, ITX
Max. drive bays
5.25" external: 0
3.5" external: 0
3.5" internal: 2
2.5" internal: 2
Front connectors
USB 3.0: 2
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling system
Front: 3x 120mm o. 2x 140mm
(optional)
Rear: 1x 120mm
(serial, RGB, 6pin connector)
Top: 2x 120mm o. 2x 140mm
(optional)
Max CPU-Cooler height
175mm
Max Graphic card length
275mm
Packing units
Shipping unit: 1 pcs
Packing unit: 18 pcs
Warranty
24 Months
Article number
EAN-Code
88881273
4260455641388
Scope of Delivery
Screw set
Manual
(German, English
Features
Front panel with RGB light strip
Side panel made of Tempered Glass
1x 120mm RGB fan at the rear included
3pin RGB header connector for 5V RGB motherboard control
LED switch to change colour effects
RGB control board for up to 7 additional RGB fans and one RGB LED strip
PWM fan control for 8 RGB fans as well as four 3pin fans over the RGB control board
Two 3.5" bays below the motherboard carrier with separate airflow
Place for water cooling in sizes of 120mm and 240mm
Power supply adapter in a separate cage in the bottom part
Openings for easy laying of cables
Easy removable dust filters in the top and below the power supply
Slot plates screwed and mesh grid
Stands
Dimensions and Weight
Cage
Case
Package
Height
450mm
470mm
545mm
Width
210mm
215mm
300mm
Depth
390mm
465mm
530mm
Weight (net): 6.26 Kg
Weight (gross): 7.59 Kg
Errors excepted. No warranty for the correctness of the information State: 01.11.2018
Certification:
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
Loading...