Inter-Tech S-3901 User Manual
S-3901 Impulse – RGB meets design
Are you looking for a special case, that moves your lighting concept into new spheres? Then the
S-3901 Impulse is just right for you! A slightly tinted Tempered Glass side panel and two RGB LED
strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal
candidate for a high-end system with elaborate LED lighting. This is not only due to the standard
120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB
control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB
motherboard control header. Space for up to four additional 3-pin fans round off the connection
variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls.
In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan
speed (Off/Low/High) and a switch for manually switching through the LED effects. Another
removable dust filter under the power supply and a variety of ways to lay the cables, complete
the offer.
RGB control board (allows effects like running light or rainbow)
3pin RGB header connector for digital 5V RGB motherboard control
Includes two RGB LED strips and a 120mm RGB fan
Side panel made of Tempered Glass
Errors excepted. No warranty for t he correctness of the inform ation State: 01.11.2018
Specifications
Motherboard
ATX, µATX, ITX
Max. drive bays
5.25" external: 0
3.5" external: 0
3.5" internal: 2
2.5" internal: 2
Front connectors
USB 3.0: 2
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling system
Front: 3x 120mm o. 2x 140mm
(optional)
Rear: 1x 120mm
(serial, RGB, 6pin connector)
Top: 2x 120mm o. 2x 140mm
(optional)
Max CPU-Cooler height
175mm
Max Graphic card length
275mm
Packing units
Shipping unit: 1 pcs
Packing unit: 24 pcs
Warranty
24 Months
Article number
EAN-Code
88881272
4260455641371
Scope of Delivery
Screw set
Manual
(German, English)
Features
Front panel and top with two RGB light strips
Side panel made of Tempered Glass
1x 120mm RGB fan at the rear included
3pin RGB header connector for 5V RGB motherboard control
LED switch to change colour effects
RGB control board for up to 7 additional RGB fans and four 3pin fans
Manual fan control via slider in the top
Two 3.5" bays below the motherboard carrier with separate airflow
Place for water cooling in sizes of 120mm and 240mm
Power supply adapter in a separate cage in the bottom part
Openings for easy laying of cables
Easy removable dust filter below the power supply
Slot plates screwed and mesh grid
Stands
Dimensions and Weight
Cage
Case
Package
Height
450mm
505mm
525mm
Width
210mm
215mm
290mm
Depth
390mm
455mm
540mm
Weight (net): 6.78 Kg
Weight (gross): 8.04 Kg
Errors excepted. No warranty for t he correctness of the informatio n State: 01.11.2018
Certification:
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
Loading...