Fan Set Argus RS-04 RGB – makes your world more colorful!
The three 4pin PWM 120mm RGB fans from Argus, in conjunction with the RGB
LED strip, provide great lighting for your PC case and provide over 300 different
effects and modes with the included wireless remote control and control unit. If
that's not enough, you can also use the integrated 5V RGB header (addressable
RGB LEDs) to synchronously manage and control all RGB LEDs via the
motherboard.
Each of the 16 integrated RGB LEDs per 120mm fan, which are located behind
two transparent plastic rings, as well as the 15 RGB LEDs of the RGB LED strip
are the guarantee for extraordinary lighting effects. Rubber-coated pads
underneath the mounting holes reliably prevent the fans from transmitting
vibration to the PC case, ensuring smooth operation at up to 1200 rpm and 22
dBA. The 50cm long RGB LED strip, with 15 integrated RGB LEDs, can be
attached either magnetically or adhesively on the back and can be placed in the
case as desired.
The set can easily be extended with up to five additional optional Argus RS-041
RGB fans and another Argus RS-042 RGB LED strip.
Radio remote control (about 10m range)
3pin RGB header connector for 5V RGB motherboard control
16 bright RGB LEDs per 120mm fan
50cm long RGB LED strip with 15 RGB LEDs included
Errors excepted. No warranty for the correctness of the information State: 24.09.2019
Package dimensions (H/W/D)
Packing units (VE/VPE/PAL)
3x Argus RS-041 RGB LED fan
1x Argus RS-042 RGB LED strip with 50cm length
(magnetically or adhesively attachment in the case)
Control unit for up to 8 fans and two LED strips
(magnetically attachment in the case)
RF wireless remote control
3-fold PWM Y-cable
1x 50cm extension cable for RGB fan
Fan screws
Manual
(german)
Three Argus RS-041 fans with 16 RGB LEDs included
Argus RS-042 RGB LED strip with 15 RGB LEDs included
Expandable to a total of 8 fans and two LED strips
> 300 effects via control unit and remote control
3pin RGB header connector for 5V RGB motherboard control
Rubberized fan corners for vibration-free operation
2pin connector for connecting the RGB control unit to the
reset button of the PC case
Fan with fluid bearing
Errors excepted. No warranty for the correctness of the information State: 24.09.2019