Inter-Tech M-908 User Manual

M-908
Manual
Thank you for buying a case from Inter-Tech. You got a high-quality case with a lot of individual controllable light effects and plenty space for large graphics adapter and hard disks.
This case is made only for computer assembling and indoor use.
We recommend to read this manual carefully and to connect fans and controler as per description. We assume no liability for damages caused by nonobservance of this manual. Keep this manual for later use. Make sure that the case is isolated from electric grid when working on it.
Because LED work with less voltage the current is higher to get the same wattage. Therefore the fire hazard increases in case of improper installation or use. Ensure that all cables are correct strong and connected before starting the computer.
In case of strange noise, smell or smoke, cut the connection to the electric grid immediately. We recommend to separate the computer from the electric grid in case of longer non-use.
If you want to dispose your computer, don´t dispose it with normal waste. Please bring it to the special collection points for electric waste. Please ask you municipality for that. Cardboard and plastics from packaging can be disposed in the appropriate waste container of household garbage.
We grant the implied warranty for this product. In case of warranty claim, please contact your dealer. The complete warranty terms are shown on our website www.inter-tech.de.
Front Back side Top
Color
Dimension
0
3.5”HDD*3/2.5”SSD*3
E-ATX/ATX/Micro-ATX/ITX
170mm
USB3.0*2,USB2.0*2
Black
210(w)x527(h)x512(d)mm
Steel/ABS
7 Slots, supports VGA cards up to 420mm
Top: 120mm*3/140mm*2 (optional)
Front: 120mm*2 (optional)
Rear: 120mm*1 (optional)
Buttom*1; Top*1
HD Audio/MIC
Material
M/B Type
5.25" device
HDD
Slots
max. height CPU cooler
Opt. fans
Dust filter
Front connectors
5x RGB LED
5x Speed control
RGB+PWM control
Standard ATX PSU Power supply (optional)
Buttom Side
Specification
1
3
5
7
9
13
11
DVD, optional
15
2
4
6
8
10
Fan, optional
Dust filter, top
12
14
Fan
Top
16
16
Front panel
Left side panel
Fan
Power supply,opt.
SSD, optional
Stands
Right side panel
Mainboard, optional
HDD, optional
Dust filter, buttom
RGB+PWM control
Components
Power Switch
M/B connector
USB2.0 M/B connector
USB3.0
M/B I/O connector
H/D Audio M/B connector
HDD LED M/B connector
Fan control
Fan cintrol
Reset Switch M/B connector
Power LED M/B connector
LED connector
Front connectors
Mainboard mounting
Cleaning dust filter
Remove it to the back
Power supply mounting
Insert Power supply Fix it with screws
HDD mounting
Fix 3,5" with screws on the buttomRemove tray
3,5" clip
2,5" fix with screws
2,5" Hard disk mounting
SSD possibility 1+2
SSD possibility 3+4
Fix SSD with screws onto the tray
Loosen the screw and remove tray
Hold SSD Fix it with screws from outside
Place tray
Fix it again
Cable plugs
HDD LED M/B connector
POWER LED M/B connector
Reset S/W M/B connector
Power S/W M/B connector
4pin Molex connector for manual fan control
3pin Fan-plug for manual fan control
Mounting water cooling
Front : 240/360mm
Top: 280/360mm
Back side: 120mm
Dimension water cooling:
Possibility 1: Fix the radiator at the rear fan position
Possibility 2: Place the radiator behind the front panel and fix it with screws.
Possibility 3: Place the radiator at the top and fix it with scews buttom-up.
Graphics card holder
Mount the graphics card. Adjust the holder according to the build-in graphics card.
1. Height: Loose screw 1, adjust bracket A and fix it.
2. Depth: Loose screws 2+5, adjust bracket C and fix it.
3. Side: Loose screws 3+4, adjust bracket B and fix it.
Connection of fan and RGB lightning
You have different possibilities to connect and control fans:
1. Adjustable switch at the top of the case You can connect up to 3 fans with 3pin connector to each slider at the top of the case. You can control the fan speed in three steps, Off, 50%, 100%. You can connect also illuminated fans to these sliders, but you can controil the color with these sliders.
2. Mounted controller The included controller, at the back side of the mainboard holder can control up to 5 fans with 3pin connector. Fans can be connected to the mainboard via the controller, to be controlled by mainboard. You can connect RGB fans with 4 pin connector to the controller to switch them with the switch at the side of the case.
Connection to the controller
1-5 Combined 3Pin connector for fan and 4Pin connector for RGB light 6 Input for PWM signal from Mainboard (CPU fan connector) 7 Power input (Floppy plug) 8 Connection for switch
You can connect 4pin RGB fans as well as normal RGB strips
Please take care of the connection scheme. Wrong connection can damge the controller.
After switch on the computer the light control is in Off-mode. Press the switch once to switch on. All LEDs will shine white first. Each push onto the switch will change the mode. The following modes are available: White, Blue, Yellow, Red, Green, Orange, Purple, Fading, Flashlight with color change. To switch off the light press the switch for more than 3 seconds.
Computer restarts always The switch don´t work. Neither fan nor light works.
Check if the Mainboard CPU Fan connector is connected to plug 6 of the controller Check if the switch is connected to plug 8 of the controller. Check if plug 7 of the controller is connected to the power supply and the power supply is on.
FAQ
Inter-Tech Elektronik Handels GmbH - Hainhäuser Weg 93 - 30855 Langenhagen - Germany - www.inter-tech.de
Loading...