Inter-Tech H-606 User Manual

H-606 – unheard of quiet!

With its pleasing appearance, the H-606 bis the perfect basis for a
silent PC system. The sound insulated case was developed for quiet
systems and is therefore ideal for use in a low-noise environment.

Its compact design in the Micro-ATX standard offers, thanks to the
absence of external drive bays, enough space and can also
accommodate graphics cards up to a length of 32cm.

Standard insulation mats on both sides and cover, a graphics card
holder and a smooth-running 120mm fan on the back ensure an
extremely quiet, as well as well-cooled system.

both sides and cover sound insulated 
two USB 3.0 interfaces
standard 120mm fan
rubberized power supply pads

Errors excepted. No warranty for the correctness of the information State: 28.01.2019

Specifications

Motherboard

µATX

Max. drive bays

5.25" external: 0

3.5" external: 0

3.5" internal: 2*

2.5" internal: 4*

Front connectors

USB 3.0: 2

Microphone: 1

Speaker: 1

Cooling system

Rear: 1x 120mm

(serial, 3pin)

Front: 3x 120mm

Max CPU-Cooler height

150mm

Max Graphic card length

320mm

Packing units

Shipping unit: 1 pcs

Packing unit: 24 pcs

Warranty

24 Months

Article number
EAN-Code

88881311

4260455643788

Scope of Delivery

Screw set

Graphics card holder

Two velcro cable ties

Installation guide

Features

Both sides and cover sound insulated

Screwless mounting for 3.5 "HDDs

Reusable mesh grid slot brackets

Rubberized pads for vibration-free power supply operation

Easy-to-remove dust filter below the power supply

Receptacle for water cooling in sizes 120mm and 240mm

1x 120mm fan on the back installed as standard

Openings for easy laying of the cables

Side parts secured with knurled screws

USB 3.0 and audio plug internally as standardized block plug

Preparation for Kensington lock

Lock loop

Stands

* the values may differ for certain combinations

Dimensions and Weight

Cage

Case

Package

Height

380mm

405mm

470mm

Width

190mm

190mm

250mm

Depth

350mm

390mm

450mm

Weight (net): 3.75Kg
Weight (gross): 4.45Kg

Errors excepted. No warranty for the correctness of the information State: 28.01.2019

Power Supply

Connector

Quantity

Max. Length

Mainboard 20+4Pin

-

-

P4 12V 4Pin - -

P4/EPS 4+4Pin

-

-

P8 12V 8Pin - -

PCI-Express 6+2Pin

-

-

PCI-Express 6Pin

-

-

IDE 4Pin - -

S-ATA - -

Floppy - -

RPM sensor cable

-

-

Fan Control - -

Fan: 120mm - -

Certification: