Inter-Tech C-907 User Manual
C-907 Cobweb – RGB meets Tempered Glass
A tempered glass front panel illuminated by three RGB fans with mesh grid insert makes the
C-907 Cobweb a real eye-catcher. The large tempered glass side panel extends over the
entire side of the case and offers insight into every corner of the interior. The effects of the
three standard Argus RS-041 RGB fans can be controlled using a switch on the front, the
supplied remote control or the 5V RGB header connection (addressable RGB LEDs). Space and
connection options for additional, optional Argus RS-041 RGB fans, a choice of 120mm,
240mm or 280mm AiO water cooling as well as various installation options for 2.5" SSDs can
be found in the spacious interior. The 3.5" hard drives are mounted in a separate cage, which
is located in the separate power supply tunnel.
Removable dust filters are located in the top of the case and below the power supply unit,
which protect the interior of the case from annoying dust and are easy to clean. The complete
package of the C-907 Cobweb is rounded off by the standard USB 3.0, USB 3.0 Type C and
USB 2.0 front ports above the front.
Tempered glass front panel with mesh grid insert
Tempered glass side window
Three 120mm RGB fans with remote control (expandable)
3pin RGB header connection for 5V RGB mainboard control
Errors excepted. No warranty for the correctness of the information State: 06.03.2020
Specifications
Mainboard
ATX, µATX, ITX
Max. drive bays
5.25" external: 0
3.5" external: 0
3.5" internal: 2
2.5" internal: 3
Front connectors
USB 3.0: 1
USB 3.0 Type C: 1
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling system
Front: 3x 120mm
(serial, RGB, 5pin)
Rear: 1x 120mm
(optional)
Top: 2x 120mm o. 140mm
(optional)
Max. CPU cooler height
160mm
Max. Graphic card length
360mm
Packing units
Shipping unit: 1 piece
Packing unit: 24 pieces
Warranty
24 Months
Article number
EAN-Code
88881329
4260455645102
Scope of delivery
Screw set
Cable ties
RGB-controller
RF wireless remote
Manual
(german)
Features
Tempered glass front panel with mesh grid insert
Tempered glass side window
3x 120mm RGB fans Argus RS-041 as standard in the front
Switching of the RGB effects either via buttons in the front or remote control
3pin RGB header connection for 5V RGB mainboard control
Guide screws for mounting the internal 3.5" hard drives
Separate SSD bays behind the mainboard carrier
Space for water cooling in the sizes 120mm, 240mm and 280mm
Power supply space in the floor
Openings for easy cable laying
Easy to remove dust filter underneath the power supply and in the top
Dimensions and Weight
Cage
Case
Package
Height
435mm
455mm
515mm
Width
200mm
210mm
270mm
Depth
400mm
450mm
500mm
Weight (net): 6.82kg
Weight (gross): 7.56kg
Errors excepted. No warranty for the correctness of the information State: 06.03.2020
Certification:
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
v
Loading...