Inter-Tech C-3 User Manual
C-3 Saphir – attractively staged
For those who love the extravagant design, the C-3 Saphir, with its slightly tinted
Tempered Glass side panel and front LED effects, that stretch across the left side of the
front, makes it the ideal candidate for a high-end system with trendy LED lighting. Not
only the 120mm RGB LED fan fitted as standard on the rear panel contributes to this,
but above all the colors and colour change effects that can be set via a switch. Space
for up to four additional, optionally available fans round off the connection variety of the
integrated circuit board.
On the top of the case is a magnetic dust filter insert. At the front you will find USB 2.0
and 3.0 ports, the HD-Audio jacks and all important switches, including the manual
switching of the LED effects. A removable dust filter under the power supply and a
variety of ways to lay the cables, complete the offer.
RGB control board
illuminated connections in the front
120mm RGB fan
Side panel made of Tempered Glass
Errors excepted. No warranty for the correctness of the information Stand: 13.11.2018
Specifications
Mainboard
ATX, µATX, ITX
Max. Drive Bays
5.25" external: 0
3.5" external: 0
3.5" internal: 2
2.5" internal: 3
Front Connectors
USB 3.0: 1
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling System
Front: 2x 120mm
(optional)
Rear: 1x 120mm
(serial, RGB, 6pin-connector)
Top: 1x 120mm o. 1x 140mm
(optional)
PSU-tunnel: 2x 120mm
(optional)
Max CPU-Cooler height
150mm
Max Graphic card length
345mm
Packing Units
Shipping unit: 1 piece
Packing unit: 28 pieces
Warranty
24 Months
Article Number
EAN-Code
88881300
4260455643375
Scope of Delivery
Screw set
Speaker
Manual
(German, English)
Features
Front panel with RGB effects
Side panel made of Tempered Glass
1x 120mm rear RGB-fan serial
Control board for up to 4 additional fans with specific 6pin connection
LED switch to change colour effects
Two 3.5" bays below the motherboard carrier with separate airflow
Space for water cooling in sizes of 120mm and 240mm
Power supply decoupled in a separate cage in the bottom part
Openings for easy laying of cables
Easy removable dust filters in the top and below the power supply
Stands
Dimensions and Weight
Cage
Case
Package
Height
430mm
450mm
470mm
Width
190mm
205mm
245mm
Depth
375mm
435mm
480mm
Weight (net): 4.66 Kg
Weight (gross): 5.49 Kg
Errors excepted. No warranty for the correctness of the information State: 13.11.2018
Certification
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
Loading...