Inter-Tech A-3411 User Manual
A-3411 Creek – RGB gaming case with tempered glass
For all ambitious gamers, the A-3411 Creek offers the ideal basis for a high-end gaming
system. Thanks to the integrated RGB LED strip in the front, which can be controlled either
via an integrated button in the front or via the 5V RGB board, it skilfully stages itself. The
standard tempered glass side panel offers insights into the installed hardware and also
upgrades the entire system. Up to four additional RGB devices with 5V 3pin RGB headers
and four 3pin fans can be connected to the integrated RGB/fan board and thus offer a
variety of configuration and design options.
There is space for optional fans not only behind the front, in the top and on the back, but
also above the power supply tunnel, where two 120mm fans can be installed, which can
contribute to waste heat and cooling. In the separate power supply tunnel there is not only
the power supply mounting space, but also a removable hard drive cage that offers space
for a 2.5" SSD and a 3.5" HDD. Dust filters in the top and bottom of the case, which are
easy to remove and clean, keep the interior free of dust.
Integrated RGB LED strip in the front panel
Tempered glass side window
RGB/fan board for four RGB devices and four 3pin fans
3pin RGB header connection for 5V RGB mainboard control
Errors excepted. No warranty for the correctness of the information State: 22.01.2020
Specifications
Motherboard
ATX, µATX, ITX
Max. drive bays
5.25" external: 0
3.5" external: 0
3.5" internal: 1
2.5" internal: 3
Front connectors
USB 3.0: 1
USB 2.0: 2
Microphone: 1
Speaker: 1
Cooling system
Front: 2x 140mm or 3x 120mm
(optional)
Rear: 1x 120mm
(optional)
Top: 2x 120mm
(optional)
Power supply tunnel: 2x 120mm
(optional)
Max CPU-Cooler height
160mm
Max Graphic card length
305mm
Packing units
Shipping unit: 1 pcs
Packing unit: 24 pcs
Warranty
24 months
Article number
EAN-Code
88881322
4260455645034
Scope of Delivery
Screw set
Cable ties
Speaker
Features
Front panel with integrated RGB LED strip
Tempered glass side window
RGB/fan board for up to four RGB devices and four 3pin fans
3pin RGB header connection for 5V RGB mainboard control
Separate 2.5" and 3.5" installation space in the power supply tunnel
Two 120mm fan bays above the power supply tunnel
Space for water cooling in the sizes 120mm, 240mm, 280mm* and 360mm
Easy to remove dust filters in the bottom and in the top
Power supply mounting decoupled in a separate cage in the base part
Reusable slot plates
Openings for easy cable laying
stands
*only 2x 2.5" SSD possible
Dimensions and Weight
Cage
Case
Package
Height
440mm
455mm
460mm
Width
200mm
205mm
255mm
Depth
340mm
385mm
495mm
Weight (net): 4.32kg
Weight (gross): 5.18kg
Errors excepted. No warranty for the correctness of the information State: 22.01.2020
Power Supply
Connector
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin - -
P4/EPS 4+4Pin
-
-
P8 12V 8Pin - -
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable
-
-
Fan Control - -
Fan: 120mm - -
Certification:
Loading...